Download or read book Tests of Reinforced Concrete Flat Slab Structures Vol 13 Classic Reprint written by Arthur N. Talbot and published by . This book was released on 2015-08-05 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Tests of Reinforced Concrete, Flat Slab Structures, Vol. 13 1. Purpose and Scope. It is the purpose of this bulletin to present the results of certain tests made on four reinforced concrete buildings and one reinforced concrete test structure. These tests were made with a view of getting experimental information on the action of the concrete and the reinforcing bars in floor slabs of the flat slab type of building construction. Data were obtained also on the bending action of the supporting columns. Efforts were made to find the distribution of stress in the bands of reinforcement both laterally and longitudinally, and that of the compressive stresses in the concrete on the opposite face of the slab; these in the regions of both the negative bending moment and of the positive bending moment. The description of the methods used in making the test is limited to those features which are different from the methods used in the tests described in Bulletin No.64 of the University of Illinois Engineering Experiment Station, "Tests of Reinforced Concrete Buildings Under Load," and from the methods described in a paper on "The Use of the Strain Gage in the Testing of Materials." It will be appreciated that the circumstances surrounding the floor test of a building are unfavorable to securing definite and uniform quantitative results. The structure is not homogeneous. There is a distribution of the resistance afforded by the structure to parts beyond the portion which is loaded. Effects of changes in temperature are troublesome. The stresses developed in the steel and in the concrete are small and there is considerable variation between parts which are supposedly similar in action. The conditions under which the measurement of deformation must be made are unfavorable to securing exactness. The location and presence of the loading material also add to the difficulties of the work. It will be seen that it is impracticable to obtain complete information or to formulate conclusions which are entirely definite. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Download or read book Tests of Reinforced Concrete Buildings Under Load Classic Reprint written by Arthur N. Talbot and published by . This book was released on 2015-07-21 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Tests of Reinforced Concrete, Buildings Under Load The Engineering Experiment Station was established by act of the Board of Trustees, December 8, 1903. It is the purpose of the Station to carry on investigations along various lines of engineering and to study problems of importance to professional engineers and to the manufacturing, railway, mining, constructional, and industrial interests of the State. The control of the Engineering Experiment Station is vested in the heads of the several departments of the College of Engineering, These constitute the Station Staff, and with the Director, determine the character of the investigations to be undertaken. The work is carried on under the supervision of the Staff, sometimes by research fellows as graduate work, sometimes by members of the instructional staff of the College of Engineering, but more frequently by investigators belonging to the Station crops. The results of these investigations are published in the form of bulletins, which record mostly the experiments of the Station's own staff of investigators. There will also be issued from time to time in the form of circulars, compilations giving the results of the experiments of engineers, industrial works, technical institutions, and governmental testing departments. The volume and number at the top of the title page of the cover are merely arbitrary numbers and refer to the general publications of the University of Illinois; above the title is given the number of the Engineering Experiment Station bulletin or circular which should be used in referring to these publications. For copies of bulletins, circulars or other information address the Engineering Experiment Station, Urbana, Illinois. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Download or read book Reinforced Concrete written by James Grierson MacGregor and published by Prentice Hall. This book was released on 1997 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.

Download or read book Books in Series written by and published by . This book was released on 1980 with total page 2410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Journal of the American Concrete Institute written by American Concrete Institute and published by . This book was released on 1978 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Whitaker s Books in Print written by and published by . This book was released on 1998 with total page 3116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering contracting written by and published by . This book was released on 1909 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Structural Engineering Volume 1 written by A. Rama Mohan Rao and published by Springer. This book was released on 2018-08-01 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.

Download or read book Engineering and Contracting written by and published by . This book was released on 1909 with total page 1302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non Destructive Evaluation of Reinforced Concrete Structures Deterioration Processes and Standard Test Methods written by Christiane Maierhofer and published by Woodhead Publishing. This book was released on 2010-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinforced concrete structures. Engineers have a range of sophisticated techniques at their disposal to assess the condition of reinforced concrete structures that do not cause material damage and which usually enable the structure to be used while the surveys are carried out. Non-destructive evaluation of the infrastructure also plays a key role in calculating and prioritising where money should be spent on repair or replacement. Providing details of related techniques and case studies, this book offers an overview of how to plan and implement the NDT of reinforced concrete structures.

Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t

Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.

Download or read book Principles of Structural Design written by Ram S. Gupta and published by CRC Press. This book was released on 2019-06-17 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber, steel, and concrete are common engineering materials used in structural design. Material choice depends upon the type of structure, availability of material, and the preference of the designer. The design practices the code requirements of each material are very different. In this updated edition, the elemental designs of individual components of each material are presented, together with theory of structures essential for the design. Numerous examples of complete structural designs have been included. A comprehensive database comprising materials properties, section properties, specifications, and design aids, has been included to make this essential reading.

Download or read book ACI 562 19 Code Requirements for Assessment Repair and Rehabilitation of Existing Concrete Structures ACI 562 19 and Comment written by ACI Committee 562 and published by . This book was released on 2019-05 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group