Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.

Download or read book Building Code Requirements for Structural Concrete written by ACI Committee 318 and published by . This book was released on 2014 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of a Probability Based Load Criterion for American National Standard A58 written by Bruce R. Ellingwood and published by . This book was released on 1980 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapid Visual Screening of Buildings for Potential Seismic Hazards Supporting Documentation written by and published by Government Printing Office. This book was released on 2015 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.

Download or read book ACI 318 19 Building Code Requirements for Structural Concrete ACI 318 19 and Commentary ACI 318R 19 written by ACI Committee 318 and published by . This book was released on 2019-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Structural Elements written by Chanakya Arya and published by CRC Press. This book was released on 2009-05-07 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.

Download or read book Recommended Minimum Requirements for Small Dwelling Construction written by United States. Department of Commerce. Building Code Committee and published by . This book was released on 1923 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t

Download or read book Recent Advances in Structural Engineering Volume 1 written by A. Rama Mohan Rao and published by Springer. This book was released on 2018-08-01 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.

Download or read book Building Code Requirements for Structural Concrete ACI 318 19 Commentary on Building Code Requirements for Structural Concrete ACI 318R 19 written by Jack P. Moehle and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Why Buildings Stand Up written by Mario Salvadori and published by W. W. Norton & Company. This book was released on 1990 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a clear and enthusiastic introduction to building methods from ancient time to the present day, illustrated throughout with line drawings. In addition, Mr. Salvadori discusses recent advances in science and technology that have had important effects on the planning and construction of buildings.

Download or read book Experiencing Architecture second edition written by Steen Eiler Rasmussen and published by MIT Press. This book was released on 1964-03-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic examination of superb design through the centuries. Widely regarded as a classic in the field, Experiencing Architecture explores the history and promise of good design. Generously illustrated with historical examples of designing excellence—ranging from teacups, riding boots, and golf balls to the villas of Palladio and the fish-feeding pavilion of Beijing's Winter Palace—Rasmussen's accessible guide invites us to appreciate architecture not only as a profession, but as an art that shapes everyday experience. In the past, Rasmussen argues, architecture was not just an individual pursuit, but a community undertaking. Dwellings were built with a natural feeling for place, materials and use, resulting in “a remarkably suitable comeliness.” While we cannot return to a former age, Rasmussen notes, we can still design spaces that are beautiful and useful by seeking to understand architecture as an art form that must be experienced. An understanding of good design comes not only from one's professional experience of architecture as an abstract, individual pursuit, but also from one's shared, everyday experience of architecture in real time—its particular use of light, color, shape, scale, texture, rhythm and sound. Experiencing Architecture reminds us of what good architectural design has accomplished over time, what it can accomplish still, and why it is worth pursuing. Wide-ranging and approachable, it is for anyone who has ever wondered “what instrument the architect plays on.”

Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls

Download or read book Code Requirements for Environmental Engineering Concrete Structures ACI 350 01 and Commentary ACI 350R 01 written by ACI Committee 350 and published by American Concrete Institute. This book was released on 2001 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standards for tests and materials - Durability requirements - Concrete quality, mixing, and placing - Formwork, embedded pipes, and construction and movement joints - Details of reinforcement - Analysis and design general considerations - Strength and serviceability requirements - Flexure and axial loads - Shear and torsion - Development and splices of reinforcement - Two-way slab systems - Walls - Footings - Precast concrete - Composite concrete flexural members - Prestressed concrete - Shells and folded plate members - Strength evaluation of existing structures - Special provisions for seismic design - Structural plain concrete.

Download or read book Guideline on Fire Ratings of Archaic Materials and Assemblies written by and published by . This book was released on 2000 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the Guideline on Fire Ratings of Archaic Materials and Assemblies is to assist architects, engineers, preservationists, and code officials in evaluating the fire safety of older buildings by providing documentation on the fire-related performance of a wide variety of archaic building materials and assemblies, and, for those cases where documentation cannot be found, by providing ways to evaluate general classes of archaic materials and assemblies.