Download or read book Testing and Design Life Analysis of Polyurea Liner Materials written by Siavash Ghasemi-Motlagh and published by . This book was released on 2014 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Certainly, water pipes, as part of an underground infrastructure system, play a key role in maintaining quality of life, health, and wellbeing of human kind. As these potable water pipes reach the end of their useful life, they create high maintenance costs, loss of flow capacity, decreased water quality, and increased dissatisfaction. There are several different pipeline renewal techniques available for different applications, among which linings are most commonly used for the renewal of water pipes. Polyurea is a lining material applied to the interior surface of the deteriorated host pipe using spray-on technique. It is applied to structurally enhance the host pipe and provide a barrier coating against further corrosion or deterioration. The purpose of this study was to establish a relationship between stress, strain and time. The results obtained from these tests were used in predicting the strength of the polyurea material during its planned 50-year design life. In addition to this, based on the 10,000 hours experimental data, curve fitting and Findley power law models were employed to predict long-term behavior of the material. Experimental results indicated that the tested polyurea material offers a good balance of strength and stiffness and can be utilized in structural enhancement applications of potable water pipes.
Download or read book Life cycle of Structural Systems written by Hitoshi Furuta and published by Routledge. This book was released on 2018-12-07 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to promote the study, research and applications in the design, assessment, prediction, and optimal management of life-cycle performance, safety, reliability, and risk of civil structures and infrastructure systems. The contribution in each chapter presents state-of-the-art as well as emerging applications related to key aspects of the life-cycle civil engineering field. The chapters in this book were originally published as a special issue of Structure and Infrastructure Engineering.
Download or read book Advances in Environmental Geotechnics written by Yunmin Chen and published by Springer Science & Business Media. This book was released on 2011-02-04 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in Environmental Geotechnics" presents the latest developments in this interdisciplinary field. The topics covered include basic and advanced theories for modeling of geoenvironmental phenomena, testing and monitoring for geoenvironmental engineering, municipal solid wastes and landfill engineering, sludge and dredged soils, geotechnical reuse of industrial wastes, contaminated land and remediation technology, applications of geosynthetics in geoenvironmental engineering, geoenvironmental risk assessment, management and sustainability, ecological techniques and case histories. This proceedings includes papers authored by core members of ISSMGE TC5 (International Society of Soil Mechanics and Geotechnical Engineering---Environmental Geotechnics) and geoenvironmental researchers from more than 20 countries and regions. It is a valuable reference for geoenvironmental and geotechnical engineers as well as civil engineers. Yunmin Chen, Xiaowu Tang, and Liangtong Zhan are Professors at the Department of Civil Engineering of Zhejiang University, China.
Download or read book Self Healing Polymers written by Wolfgang H. Binder and published by John Wiley & Sons. This book was released on 2013-03-29 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing is a well-known phenomenon in nature: a broken bone merges after some time and if skin is damaged, the wound will stop bleeding and heals again. This concept can be mimicked in order to create polymeric materials with the ability to regenerate after they have suffered degradation or wear. Already realized applications are used in aerospace engineering, and current research in this fascinating field shows how different self-healing mechanisms proven successful by nature can be adapted to produce even more versatile materials. The book combines the knowledge of an international panel of experts in the field and provides the reader with chemical and physical concepts for self-healing polymers, including aspects of biomimetic processes of healing in nature. It shows how to design self-healing polymers and explains the dynamics in these systems. Different self-healing concepts such as encapsulated systems and supramolecular systems are detailed. Chapters on analysis and friction detection in self-healing polymers and on applications round off the book.
Download or read book Rehabilitation of Water Mains written by American Water Works Association and published by American Water Works Association. This book was released on 2001 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: P. 16.
Download or read book An Asset Management Approach for Drainage Infrastructure and Culverts written by Mohammad Najafi and published by . This book was released on 2008 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drainage infrastructure systems (culvert, storm sewer, outfall and related drainage elements) are mostly buried underground and are in need of special attention in terms of proactive/preventive asset management strategy. Drainage infrastructure systems represent an integral portion of roadway assets that routinely require inspection, maintenance, repair and renewal. Further challenges are the wide geospatial distribution of these infrastructure assets and environmental exposure. There has been considerable research conducted on culverts, but mostly looked at the problem from a traditional structural/geotechnical perspective. Asset management procedures for culverts and drainage infrastructure systems are complex issues, and can benefit a great deal from an optimal asset management program that draws from programs pertaining to buried pipes. The first and most important step in an asset management initiative is the establishment of mechanism for asset inventory and asset conditions in a format compatible with the routine procedures of field operators and inspectors. The first objective of this research project was to develop field protocols and operational business rules for inventory data collection and management and inspection of drainage infrastructures in terms of types of data to be collected, frequency of inspection, and analysis and reporting mechanisms. After review of these protocols by the project oversight committee, a pilot study was conducted to verify efficiency of their implementation. The condition assessment protocol introduced is useful in evaluating the overall condition of culverts and can be used for decision making regarding the repair, renewal or replacement of culverts. For the second objective of this project, investigators examined the inventory and inspection protocols employed by Ohio Department of Transportation (ODOT) and developed a decision support platform, which establishes a link between the inspection results and appropriate repair, renewal and replacement procedures. After applying the recommended procedures, the transportation agencies can better track the conditions of culverts thereby reducing the risks of culvert failures.
Download or read book Materials Performance written by and published by . This book was released on 2006 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Protective Coatings Linings written by and published by . This book was released on 2008 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1986-10 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 1992 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Szycher s Handbook of Polyurethanes Second Edition written by Michael Szycher, Ph.D and published by CRC Press. This book was released on 2012-07-13 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical handbook rather than merely a chemistry reference, Szycher's Handbook of Polyurethanes, Second Edition offers an easy-to-follow compilation of crucial new information on polyurethane technology, which is irreplaceable in a wide range of applications. This new edition of a bestseller is an invaluable reference for technologists, marketers, suppliers, and academicians who require cutting-edge, commercially valuable data on the most advanced uses for polyurethane, one of the most important and complex specialty polymers. internationally recognized expert Dr. Michael Szycher updates his bestselling industry "bible" With seven entirely new chapters and five that are revised and updated, this book summarizes vital contents from U.S. patent literature—one of the most comprehensive sources of up-to-date technical information. These patents illustrate the most useful technology discovered by corporations, universities, and independent inventors. Because of the wealth of information they contain, this handbook features many full-text patents, which are carefully selected to best illustrate the complex principles involved in polyurethane chemistry and technology. Features of this landmark reference include: Hundreds of practical formulations Discussion of the polyurethane history, key terms, and commercial importance An in-depth survey of patent literature Useful stoichiometric calculations The latest "green" chemistry applications A complete assessment of medical-grade polyurethane technology Not biased toward any one supplier’s expertise, this special reference uses a simplified language and layout and provides extensive study questions after each chapter. It presents rich technical and historical descriptions of all major polyurethanes and updated sections on medical and biological applications. These features help readers better understand developmental, chemical, application, and commercial aspects of the subject.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Grease Lubrication in Rolling Bearings written by Piet M. Lugt and published by John Wiley & Sons. This book was released on 2013-02-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal and dynamics properties. Later chapters cover the dynamics of greased bearings, including grease life, bearing life, reliability and testing. The final chapter covers lubrications systems – the systems that deliver grease to the components requiring lubrication. Grease Lubrication in Rolling Bearings: Describes the underlying physical and chemical properties of grease. Discusses the effect of load, speed, temperature, bearing geometry, bearing materials and grease type on bearing wear. Covers both bearing and grease performance, including thermo-mechanical ageing and testing methodologies. It is intended for researchers and engineers in the petro-chemical and bearing industry, industries related to this (e.g. wind turbine industry, automotive industry) and for application engineers. It will also be of interest for teaching in post-graduate courses.
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 1992 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
