Download or read book Springer Handbook of Metrology and Testing written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2011-07-22 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book ASM Handbook written by and published by . This book was released on 1990 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.
Download or read book GB T 2039 2012 English translated version written by Codeofchina.com and published by www.codeofchina.com. This book was released on 2013-03-01 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 2039-2012 Code for Acceptance of Construction Quality of Masonry Engineering English-translated version
Download or read book Tensile Testing 2nd Edition written by Joseph R. Davis and published by ASM International. This book was released on 2004 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Testing and Evaluation written by Howard Kuhn and published by ASM International(OH). This book was released on 2000 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is ASM's standard reference on the mechanical characteristics and testing of metals, plastics, ceramics, and composites. Understand the basics of mechanical behavior with in-depth coverage on testing methods for those materials. Comparative mechanical properties and the mechanical characteristics of metals, plastics, and ceramics are included throughout for general reference. Updated references to ISO, ASTM, DIN, EN, JIS and other standards are also included.
Download or read book Materials for Advanced Power Engineering 1994 written by D. Coutsouradis and published by Springer Science & Business Media. This book was released on 1994 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of energy in the modern world goes beyond mere technology and economics to influence welfare, the environment, the quality of life and, in broad terms, civilization itself. Since the Industrial Revolution, energy conservation technology has been at the forefront of the innovation required to satisfy the needs of mankind and, more than any other, this technology has always depended on the performance of the materials used.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Harmonization of Testing Practice for High Temperature Materials written by M.S. Loveday and published by Springer. This book was released on 2013-12-20 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present decade is opening new frontiers in high-energy astrophysics. After the X-ray satellites in the 1980's, including Einstein, Tenma, EXOSAT and Ginga, several satellites are, or will soon be, simultaneously in orbit offering spectacular advances in X-ray imaging at low energies (ROSATj Yohkoh) as well as at high energies (GRANAT), in spectroscopy with increased bandwidth (ASCAj SAX), and in timing (XTE). While these satellites allow us to study atomic radiation from hot plasmas or energetic electrons, other satellites study nuclear radiation at gamma-ray energies (CGRO) associated with radioactivity or spallation reactions. These experiments show that the whole universe is emitting radiation at high energies, hence we call it the "hot universe. " The hot universe, preferentially emitting X- and gamma-rays, provides us with many surprises and much information. A symposium "The Hot Universe" was held in conjunction with the XXIIIrd General Assembly of the International Astronomical Union, at Kyoto on August 26-30 in 1997. The proceedings are organized as follows. Synthetic view of "the hot universe" is discussed in Section 1, "Plasma and Fresh Nucleosynthesis Phenomena". Timely discussions on the strategy for future missions "Future Space Program" are found in Section 2. Then the contents are divided into two major subjects: the compact objects and thin hot diffuse plasmas. Section 3 is devoted to the category of compact objects which includes white dwarfs, neutron stars, and gravitationally collapsed objects: stellar mass black holes or active galactic nuclei.
Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.
Download or read book Stress Relaxation Testing written by A. Fox and published by ASTM International. This book was released on 1979 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. - Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites - Puts a specific focus on viscoelastic and viscoplastic modeling - Features the time-temperature-age superposition principle for predicting long-term response - Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
Download or read book Encyclopedia of Materials written by K. H. J. Buschow and published by . This book was released on 2001 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanyind CR-ROM conrtains The Encyclopedia of Materials Science and Technology on a web access disc.
Download or read book Joint Convention on Machines for Materials and Environmental Testing written by Institution of Mechanical Engineers (Great Britain). Applied Mechanics Group and published by . This book was released on 1966 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Download or read book Metallurgia written by and published by . This book was released on 1969 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
