Download or read book Nuclear power reactors in the world written by International Atomic Energy Agency and published by . This book was released on 2003 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the twenty-fourth edition of Reference Data Series No. 2, which presents the most recent reactor data available to the IAEA. It contains summarized information as of the end of 2003 on: (1) power reactors operating or under construction, and shut down; and (2) performance data on reactors operating in the IAEA Member States, as reported to the IAEA. The information is collected by the Agency through designated national correspondents in the Member States. The replies are used to maintain the IAEA's Power Reactor Information System (PRIS).
Download or read book Terms for Describing Advanced Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-10-31 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms for describing advanced nuclear power plants (NPPs) need to conform to the broad, general, common understanding by the public as well as by the technical community. This publication is a revision of IAEA-TECDOC-936 incorporating developments and initiatives since 1997 in the areas of advanced, evolutionary, and innovative nuclear reactor designs, description of design development phases, inclusive of relevant safety and regulatory terminology, consistent with current IAEA safety standards and glossaries. The objective of this publication is to provide Member States with up-to-date terms for describing advanced NPPs, to draw distinctions between design phases reflecting the maturities of designs, and to clarify definitions of commonly used terms in describing advanced NPPs.
Download or read book Handbook of Generation IV Nuclear Reactors written by Igor Pioro and published by Woodhead Publishing. This book was released on 2022-12-07 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. The book teaches the reader about available technologies, future prospects and the feasibility of each concept presented, equipping them users with a strong skillset which they can apply to their own work and research. - Provides a fully updated, revised and comprehensive handbook dedicated entirely to generation IV nuclear reactors - Includes new trends and developments since the first publication, as well as brand new case studies and appendices - Covers the latest research, developments and design information surrounding generation IV nuclear reactors
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area
Download or read book Project Management in Nuclear Power Plant Construction written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides guidance on project management from the preparatory phase to plant turnover to commissioning of nuclear power plants. The guidelines and experiences described will enable project managers to obtain better performance in nuclear power plant construction.
Download or read book Cheaper Safer Plants Or Wealth and Safety at Work written by Trevor A. Kletz and published by . This book was released on 1985 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Gas cooled Reactors written by Tetsuaki Takeda and published by Academic Press. This book was released on 2021-02-24 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Temperature Gas Reactors is the fifth volume in the JSME Series on Thermal and Nuclear Power Generation. Series Editor Yasuo Koizumi and his Volume editors Tetsuaki Takeda and Yoshiyuki Inagaki present the latest research on High-Temperature Gas Reactor (HTGR) development and utilization, beginning with an analysis of the history of HTGRs. A detailed analysis of HTGR design features, including reactor core design, cooling tower design, pressure vessel design, I&C factors and safety design, provides readers with a solid understanding of how to develop efficient and safe HTGR within a nuclear power plant.The authors combine their knowledge to present a guide on the safety of HTGRs throughout the entire reactor system, drawing on their unique experience to pass on lessons learned and best practices to support professionals and researchers in their design and operation of these advanced reactor types. Case studies of critical testing carried out by the authors provide the reader with firsthand information on how to conduct tests safely and effectively and an understanding of which responses are required in unexpected incidents to achieve their research objectives. An analysis of technologies and systems in development and testing stages offer the reader a look to the future of HTGRs and help to direct and inform their further research in heat transfer, fluid-dynamics, fuel options and advanced reactor facility selection.This volume is of interest for nuclear and thermal energy engineers and researchers focusing on HTGRs, HTGR plant designers and operators, regulators, post graduate students of nuclear engineering, national labs, government officials and agencies in power and energy policy and regulations. - Written by the leaders and pioneers in nuclear research at the Japanese Society of Mechanical Engineers and draws upon their combined wealth of knowledge and experience - Includes real examples and case studies from Japan, the US and Europe to provide a deeper learning opportunity with practical benefits - Considers the societal impact and sustainability concerns and goals throughout the discussion - Includes safety factors and considerations, as well as unique results from performance testing of HTGR systems
Download or read book Management of Nuclear Power Plant Projects written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-11-25 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Member States intending to introduce a nuclear power programme will need to pass through several phases during the implementation. Experience shows that careful planning of the objectives, roles, responsibilities, interfaces and tasks to be carried out in different phases of a nuclear project is important for success. This publication presents a harmonized approach that may be used to structure the owner/operator management system and establish and manage nuclear projects and their development activities irrespective of the adopted approach. It has been developed from shared management practices and consolidated experiences provided by nuclear project management specialists through a series of workshops and working groups organized by the IAEA. The resultant publication presents a useful framework for the management of nuclear projects from initiation to closeout and captures international best practices.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IAEA Safety Glossary written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2019-09-17 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IAEA Safety Glossary defines and explains technical terms used in the IAEA Safety Standards and other safety related IAEA publications, and provides information on their usage. The 2018 Edition of the IAEA Safety Glossary is a new edition of the IAEA Safety Glossary, originally issued in 2007. It has been revised and updated to take into account new terminology and usage in safety standards issued between 2007 and 2018. The revisions and updates reflect developments in the technical areas of application of the safety standards and changes in regulatory approaches in Member States.
Download or read book Advanced Security and Safeguarding in the Nuclear Power Industry written by Victor Nian and published by Academic Press. This book was released on 2020-08-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Security and Safeguarding in the Nuclear Power Industry: State of the art and future challenges presents an overview of a wide ranging scientific, engineering, policy, regulatory, and legal issues facing the nuclear power industry. Editor Victor Nian and his team of contributors deliver a much needed review of the latest developments in safety, security and safeguards ("Three S's”) as well as other related and important subject matters within and beyond the nuclear power industry. This book is particularly insightful to countries with an interest in developing a nuclear power industry as well as countries where education to improve society's opinion on nuclear energy is crucial to its future success. Advanced Security and Safeguarding in the Nuclear Power Industry covers the foundations of nuclear power production as well as the benefits and impacts of radiation to human society, international conventions, treaties, and standards on the "Three S's”, emergency preparedness and response, and civil liability in the event of a nuclear accident. The socio-technical and economic risks of civilian and military applications of atomic energy Putting into perspective the hazards of radioactive sources and health impacts of exposure to radiation Prevention and protection against severe nuclear accidents with a much needed update on lessons learnt from "Fukushima” International conventions, treaties, legal frameworks, standards and best practices on "Three S's”, emergency preparedness and response, and civil liability Evolving technological and institutional challenges facing the nuclear power industry in the future
Download or read book Nuclear Reactor Technology Assessment for Near Term Deployment written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2013 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the increasing interest in the near term deployment of new nuclear power plants, IAEA Member States have requested guidance on the process of evaluating and selecting available technology options. Reactor technology assessment enables the evaluation, selection, and deployment of the best technology to meet the objectives of a nuclear power programme. This publication demonstrates how reactor technology assessment is performed and how the process and results of this work enable decision making in nuclear power planning. The approach also provides decision makers with the documentation necessary to support their conclusions.
Download or read book Legal and Institutional Issues of Transportable Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2013 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: A transportable nuclear power plant (TNPP) is a factory-manufactured, movable nuclear power plant, which when fuelled is capable of producing final energy products such as electricity and heat. Transportable nuclear power plants are not designed to operate during transportation. This publication highlights the potential benefits of TNPPs, describes the legal and institutional issues for their deployment in countries other than the country of origin, reveals challenges that might be faced in their deployment, and outlines pathways for resolution of the identified issues and challenges in the short and long terms. It is addressed to senior legal, regulatory and technical officers in Member States planning to embark on a nuclear power programme or to expand an existing one by considering the introduction of a TNPP.
Download or read book Lessons Learned from the Fukushima Nuclear Accident for Improving Safety of U S Nuclear Plants written by National Research Council (U.S.). Committee on Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants and published by National Academy Press. This book was released on 2014-10-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The March 11, 2011, Great East Japan Earthquake and tsunami sparked a humanitarian disaster in northeastern Japan. They were responsible for more than 15,900 deaths and 2,600 missing persons as well as physical infrastructure damages exceeding $200 billion. The earthquake and tsunami also initiated a severe nuclear accident at the Fukushima Daiichi Nuclear Power Station. Three of the six reactors at the plant sustained severe core damage and released hydrogen and radioactive materials. Explosion of the released hydrogen damaged three reactor buildings and impeded onsite emergency response efforts. The accident prompted widespread evacuations of local populations, large economic losses, and the eventual shutdown of all nuclear power plants in Japan. "Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants" is a study of the Fukushima Daiichi accident. This report examines the causes of the crisis, the performance of safety systems at the plant, and the responses of its operators following the earthquake and tsunami. The report then considers the lessons that can be learned and their implications for U.S. safety and storage of spent nuclear fuel and high-level waste, commercial nuclear reactor safety and security regulations, and design improvements. "Lessons Learned" makes recommendations to improve plant systems, resources, and operator training to enable effective ad hoc responses to severe accidents. This report's recommendations to incorporate modern risk concepts into safety regulations and improve the nuclear safety culture will help the industry prepare for events that could challenge the design of plant structures and lead to a loss of critical safety functions. In providing a broad-scope, high-level examination of the accident, "Lessons Learned" is meant to complement earlier evaluations by industry and regulators. This in-depth review will be an essential resource for the nuclear power industry, policy makers, and anyone interested in the state of U.S. preparedness and response in the face of crisis situations.
Download or read book Dependability Assessment of Software for Safety Instrumentation and Control Systems at Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2018-09-30 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication defines a framework that represents the state of the art in assessment methodologies for safety and instrumentation and control software used at nuclear power plants. It describes an approach for developing and communicating assessments based on claims, argument and evidence. The assessment of software dependability, which encompasses properties such as safety, reliability, availability, maintainability and security, is an essential and challenging aspect of the safety justification. Guiding principles for a dependability assessment are established to provide the basis for defining an assessment strategy and implementing the assessment process. Sources of evidence for the assessment are provided and lessons learned from past digital instrumentation and control system implementation in areas such as software development, operational usage, regulatory review and platform certification are also described.
Download or read book Technical Challenges in the Application and Licensing of Digital Instrumentation and Control Systems in Nuclear Power Plants written by and published by . This book was released on 2015 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: "With the modernization of existing analogue instrumentation and control (I & C) systems in nuclear power plants through digital I & C technology, and the implementation of digital I & C systems in new plants, the industry is faced with significant challenges. These challenges appear in the form of difficulties in managing the necessarily incremental transition, highly integrated (and interdependent) architectures, the flexible configurability enabled by digital technology, and uncertainty and inconsistency in licensing digital I & C systems and equipment in the different Member States. This publication discusses 17 major issues that utilities, developers, suppliers and regulatory stakeholders need to consider, so that the industry can capture and benefit from shared experience, recent technological developments, and emerging best practices."--Publisher's description.
Download or read book Terms for Describing Advanced Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2024-02-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms for describing advanced nuclear power plants (NPPs) need to conform to the broad, general, common understanding by the public as well as by the technical community. This publication is a revision of IAEA-TECDOC-936 incorporating developments and initiatives since 1997 in the areas of advanced, evolutionary, and innovative nuclear reactor designs, description of design development phases, inclusive of relevant safety and regulatory terminology, consistent with current IAEA safety standards and glossaries. The objective of this publication is to provide Member States with up-to-date terms for describing advanced NPPs, to draw distinctions between design phases reflecting the maturities of designs, and to clarify definitions of commonly used terms in describing advanced NPPs
