Download or read book Tensor Algebra And Analysis For Engineers With Applications To Differential Geometry Of Curves And Surfaces written by Paolo Vannucci and published by World Scientific. This book was released on 2023-02-27 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern theoretical and applied mechanics, tensors and differential geometry are two almost essential tools. Unfortunately, in university courses for engineering and mechanics students, these topics are often poorly treated or even completely ignored. At the same time, many existing, very complete texts on tensors or differential geometry are so advanced and written in abstract language that discourage young readers looking for an introduction to these topics specifically oriented to engineering applications.This textbook, mainly addressed to graduate students and young researchers in mechanics, is an attempt to fill the gap. Its aim is to introduce the reader to the modern mathematical tools and language of tensors, with special applications to the differential geometry of curves and surfaces in the Euclidean space. The exposition of the matter is sober, directly oriented to problems that are ordinarily found in mechanics and engineering. Also, the language and symbols are tailored to those usually employed in modern texts of continuum mechanics.Though not exhaustive, as any primer textbook, this volume constitutes a coherent, self-contained introduction to the mathematical tools and results necessary in modern continuum mechanics, concerning vectors, 2nd- and 4th-rank tensors, curves, fields, curvilinear coordinates, and surfaces in the Euclidean space. More than 100 exercises are proposed to the reader, many of them complete the theoretical part through additional results and proofs. To accompany the reader in learning, all the exercises are entirely developed and solved at the end of the book.
Download or read book Tensor Algebra and Tensor Analysis for Engineers written by Mikhail Itskov and published by Springer Science & Business Media. This book was released on 2009-04-30 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a large gap between engineering courses in tensor algebra on one hand, and the treatment of linear transformations within classical linear algebra on the other. This book addresses primarily engineering students with some initial knowledge of matrix algebra. Thereby, mathematical formalism is applied as far as it is absolutely necessary. Numerous exercises provided in the book are accompanied by solutions enabling autonomous study. The last chapters deal with modern developments in the theory of isotropic and anisotropic tensor functions and their applications to continuum mechanics and might therefore be of high interest for PhD-students and scientists working in this area.
Download or read book Introduction to Differential Geometry with Tensor Applications written by Dipankar De and published by John Wiley & Sons. This book was released on 2022-05-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO DIFFERENTIAL GEOMETRY WITH TENSOR APPLICATIONS This is the only volume of its kind to explain, in precise and easy-to-understand language, the fundamentals of tensors and their applications in differential geometry and analytical mechanics with examples for practical applications and questions for use in a course setting. Introduction to Differential Geometry with Tensor Applications discusses the theory of tensors, curves and surfaces and their applications in Newtonian mechanics. Since tensor analysis deals with entities and properties that are independent of the choice of reference frames, it forms an ideal tool for the study of differential geometry and also of classical and celestial mechanics. This book provides a profound introduction to the basic theory of differential geometry: curves and surfaces and analytical mechanics with tensor applications. The author has tried to keep the treatment of the advanced material as lucid and comprehensive as possible, mainly by including utmost detailed calculations, numerous illustrative examples, and a wealth of complementing exercises with complete solutions making the book easily accessible even to beginners in the field. Groundbreaking and thought-provoking, this volume is an outstanding primer for modern differential geometry and is a basic source for a profound introductory course or as a valuable reference. It can even be used for self-study, by students or by practicing engineers interested in the subject. Whether for the student or the veteran engineer or scientist, Introduction to Differential Geometry with Tensor Applications is a must-have for any library. This outstanding new volume: Presents a unique perspective on the theories in the field not available anywhere else Explains the basic concepts of tensors and matrices and their applications in differential geometry and analytical mechanics Is filled with hundreds of examples and unworked problems, useful not just for the student, but also for the engineer in the field Is a valuable reference for the professional engineer or a textbook for the engineering student
Download or read book Concepts from Tensor Analysis and Differential Geometry written by Tracy Yerkes Thomas and published by . This book was released on 2013-08 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tensor Algebra and Tensor Analysis for Engineers written by Mikhail Itskov and published by Springer. This book was released on 2015-03-25 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth and revised edition of a well-received book that aims at bridging the gap between the engineering course of tensor algebra on the one side and the mathematical course of classical linear algebra on the other side. In accordance with the contemporary way of scientific publications, a modern absolute tensor notation is preferred throughout. The book provides a comprehensible exposition of the fundamental mathematical concepts of tensor calculus and enriches the presented material with many illustrative examples. In addition, the book also includes advanced chapters dealing with recent developments in the theory of isotropic and anisotropic tensor functions and their applications to continuum mechanics. Hence, this monograph addresses graduate students as well as scientists working in this field. In each chapter numerous exercises are included, allowing for self-study and intense practice. Solutions to the exercises are also provided.
Download or read book Tensor Calculus and Differential Geometry for Engineers written by Shahab Sahraee and published by Springer Nature. This book was released on 2023-12-12 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains the basics of tensor algebra as well as a comprehensive description of tensor calculus, both in Cartesian and curvilinear coordinates. Some recent developments in representation theorems and differential forms are included. The last part of the book presents a detailed introduction to differential geometry of surfaces and curves which is based on tensor calculus. By solving numerous exercises, the reader is equipped to properly understand the theoretical background and derivations. Many solved problems are provided at the end of each chapter for in-depth learning. All derivations in this text are carried out line by line which will help the reader to understand the basic ideas. Each figure in the book includes descriptive text that corresponds with the theoretical derivations to facilitate rapid learning.
Download or read book Tensor Analysis and Elementary Differential Geometry for Physicists and Engineers written by Hung Nguyen-Schäfer and published by Springer. This book was released on 2016-08-16 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents tensors and differential geometry in a comprehensive and approachable manner, providing a bridge from the place where physics and engineering mathematics end, and the place where tensor analysis begins. Among the topics examined are tensor analysis, elementary differential geometry of moving surfaces, and k-differential forms. The book includes numerous examples with solutions and concrete calculations, which guide readers through these complex topics step by step. Mindful of the practical needs of engineers and physicists, book favors simplicity over a more rigorous, formal approach. The book shows readers how to work with tensors and differential geometry and how to apply them to modeling the physical and engineering world. The authors provide chapter-length treatment of topics at the intersection of advanced mathematics, and physics and engineering: • General Basis and Bra-Ket Notation • Tensor Analysis • Elementary Differential Geometry • Differential Forms • Applications of Tensors and Differential Geometry • Tensors and Bra-Ket Notation in Quantum Mechanics The text reviews methods and applications in computational fluid dynamics; continuum mechanics; electrodynamics in special relativity; cosmology in the Minkowski four-dimensional space time; and relativistic and non-relativistic quantum mechanics. Tensor Analysis and Elementary Differential Geometry for Physicists and Engineers benefits research scientists and practicing engineers in a variety of fields, who use tensor analysis and differential geometry in the context of applied physics, and electrical and mechanical engineering. It will also interest graduate students in applied physics and engineering.
Download or read book Introduction to Vector and Tensor Analysis written by Robert C. Wrede and published by Courier Corporation. This book was released on 2013-01-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines general Cartesian coordinates, the cross product, Einstein's special theory of relativity, bases in general coordinate systems, maxima and minima of functions of two variables, line integrals, integral theorems, and more. 1963 edition.
Download or read book Tensor and Vector Analysis written by C. E. Springer and published by Courier Corporation. This book was released on 2013-09-26 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assuming only a knowledge of basic calculus, this text's elementary development of tensor theory focuses on concepts related to vector analysis. The book also forms an introduction to metric differential geometry. 1962 edition.
Download or read book Tensor Analysis and Its Applications written by Khan and published by PartridgeIndia. This book was released on 2015-08-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a textbook for undergraduate and postgraduate students of mathematics. It will be useful to the researchers working in the field of differential geometry and its applications to general theory of relativity and other applied areas. It will also be helpful in preparing for the competitive examinations like IAS, IES, NET, PCS, and other higher education tests. The text starts with the basic concepts and results, which shall refer throughout this book and is followed by the study of the tensor algebra and its calculus, consisting the notion of tensor, its operations, and its different types; Christoffel's symbols and its properties, the concept of covariant differentiation of tensors and its properties, tensor form of gradient, divergence, laplacian and curl, divergence of a tensor, intrinsic derivatives, and parallel displacement of vectors, Riemann's symbols and its properties, and application of tensor in different areas.
Download or read book TEXTBOOK OF TENSOR CALCULUS AND DIFFERENTIAL GEOMETRY AND THEIR APPLICATIONS written by Quddus Khan and published by Misha Books. This book was released on 2020-12-29 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a Textbook for Undergraduate and Post - graduate students of Mathematics. It will be useful to the researchers working in the field of Differential geometry and its applications to general theory of relativity and other applied areas. It will also be helpful in preparing for the competitive examinations like IAS, IES, NET, PCS, and UP Higher Education exams. The text starts with a chapter on Preliminaries discussing basic concepts and results which would be taken for general later in the subsequent chapters of this book. This is followed by the Study of the Tensors Algebra and its operations and types, Christoffel's symbols and its properties, the concept of covariant differentiation and its properties, Riemann's symbols and its properties, and application of tensor in different areas in part – I and the study of the Theory of Curves in Space, Concepts of a Surface and Fundamental forms, Envelopes and Developables, Curvature of Surface and Lines of Curvature, Fundamental Equations of Surface Theory, Theory of Geodesics, Differentiable Manifolds and Riemannian Manifold and Application of Differential Geometry in Part –II. KEY FEATURES: Provides basic Concepts in an easy to understand style; Presentation of the subject in a natural way; Includes a large number of solved examples and illuminating illustrations; Exercise questions at the end of the topic and at the end of each chapter; Proof of the theorems are given in an easy to understand style; Neat and clean figures are given at appropriate places; Notes and remarks are given at appropriate places.
Download or read book Tensor Analysis with Applications in Mechanics written by L. P. Lebedev and published by World Scientific. This book was released on 2010 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Preliminaries. 1.1. The vector concept revisited. 1.2. A first look at tensors. 1.3. Assumed background. 1.4. More on the notion of a vector. 1.5. Problems -- 2. Transformations and vectors. 2.1. Change of basis. 2.2. Dual bases. 2.3. Transformation to the reciprocal frame. 2.4. Transformation between general frames. 2.5. Covariant and contravariant components. 2.6. The cross product in index notation. 2.7. Norms on the space of vectors. 2.8. Closing remarks. 2.9. Problems -- 3. Tensors. 3.1. Dyadic quantities and tensors. 3.2. Tensors from an operator viewpoint. 3.3. Dyadic components under transformation. 3.4. More dyadic operations. 3.5. Properties of second-order tensors. 3.6. Eigenvalues and eigenvectors of a second-order symmetric tensor. 3.7. The Cayley-Hamilton theorem. 3.8. Other properties of second-order tensors. 3.9. Extending the Dyad idea. 3.10. Tensors of the fourth and higher orders. 3.11. Functions of tensorial arguments. 3.12. Norms for tensors, and some spaces. 3.13. Differentiation of tensorial functions. 3.14. Problems -- 4. Tensor fields. 4.1. Vector fields. 4.2. Differentials and the nabla operator. 4.3. Differentiation of a vector function. 4.4. Derivatives of the frame vectors. 4.5. Christoffel coefficients and their properties. 4.6. Covariant differentiation. 4.7. Covariant derivative of a second-order tensor. 4.8. Differential operations. 4.9. Orthogonal coordinate systems. 4.10. Some formulas of integration. 4.11. Problems -- 5. Elements of differential geometry. 5.1. Elementary facts from the theory of curves. 5.2. The torsion of a curve. 5.3. Frenet-Serret equations. 5.4. Elements of the theory of surfaces. 5.5. The second fundamental form of a surface. 5.6. Derivation formulas. 5.7. Implicit representation of a curve; contact of curves. 5.8. Osculating paraboloid. 5.9. The principal curvatures of a surface. 5.10. Surfaces of revolution. 5.11. Natural equations of a curve. 5.12. A word about rigor. 5.13. Conclusion. 5.14. Problems -- 6. Linear elasticity. 6.1. Stress tensor. 6.2. Strain tensor. 6.3. Equation of motion. 6.4. Hooke's law. 6.5. Equilibrium equations in displacements. 6.6. Boundary conditions and boundary value problems. 6.7. Equilibrium equations in stresses. 6.8. Uniqueness of solution for the boundary value problems of elasticity. 6.9. Betti's reciprocity theorem. 6.10. Minimum total energy principle. 6.11. Ritz's method. 6.12. Rayleigh's variational principle. 6.13. Plane waves. 6.14. Plane problems of elasticity. 6.15. Problems -- 7. Linear elastic shells. 7.1. Some useful formulas of surface theory. 7.2. Kinematics in a neighborhood of [symbol]. 7.3. Shell equilibrium equations. 7.4. Shell deformation and strains; Kirchhoff's hypotheses. 7.5. Shell energy. 7.6. Boundary conditions. 7.7. A few remarks on the Kirchhoff-Love theory. 7.8. Plate theory. 7.9. On Non-classical theories of plates and shells
Download or read book A Brief on Tensor Analysis written by James G. Simmonds and published by Springer Science & Business Media. This book was released on 2012-10-31 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this text which gradually develops the tools for formulating and manipulating the field equations of Continuum Mechanics, the mathematics of tensor analysis is introduced in four, well-separated stages, and the physical interpretation and application of vectors and tensors are stressed throughout. This new edition contains more exercises. In addition, the author has appended a section on Differential Geometry.
Download or read book Tensor Analysis written by Leonid P Lebedev and published by World Scientific. This book was released on 2003-04-24 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensor analysis is an essential tool in any science (e.g. engineering, physics, mathematical biology) that employs a continuum description. This concise text offers a straightforward treatment of the subject suitable for the student or practicing engineer. The final chapter introduces the reader to differential geometry, including the elementary theory of curves and surfaces. A well-organized formula list, provided in an appendix, makes the book a very useful reference. A second appendix contains full hints and solutions for the exercises.
Download or read book Introduction to Tensor Analysis and the Calculus of Moving Surfaces written by Pavel Grinfeld and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is distinguished from other texts on the subject by the depth of the presentation and the discussion of the calculus of moving surfaces, which is an extension of tensor calculus to deforming manifolds. Designed for advanced undergraduate and graduate students, this text invites its audience to take a fresh look at previously learned material through the prism of tensor calculus. Once the framework is mastered, the student is introduced to new material which includes differential geometry on manifolds, shape optimization, boundary perturbation and dynamic fluid film equations. The language of tensors, originally championed by Einstein, is as fundamental as the languages of calculus and linear algebra and is one that every technical scientist ought to speak. The tensor technique, invented at the turn of the 20th century, is now considered classical. Yet, as the author shows, it remains remarkably vital and relevant. The author’s skilled lecturing capabilities are evident by the inclusion of insightful examples and a plethora of exercises. A great deal of material is devoted to the geometric fundamentals, the mechanics of change of variables, the proper use of the tensor notation and the discussion of the interplay between algebra and geometry. The early chapters have many words and few equations. The definition of a tensor comes only in Chapter 6 – when the reader is ready for it. While this text maintains a consistent level of rigor, it takes great care to avoid formalizing the subject. The last part of the textbook is devoted to the Calculus of Moving Surfaces. It is the first textbook exposition of this important technique and is one of the gems of this text. A number of exciting applications of the calculus are presented including shape optimization, boundary perturbation of boundary value problems and dynamic fluid film equations developed by the author in recent years. Furthermore, the moving surfaces framework is used to offer new derivations of classical results such as the geodesic equation and the celebrated Gauss-Bonnet theorem.
Download or read book Concepts from Tensor Analysis and Differential Geometry written by Tracy Y. Thomas and published by Elsevier. This book was released on 2016-06-03 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concepts from Tensor Analysis and Differential Geometry discusses coordinate manifolds, scalars, vectors, and tensors. The book explains some interesting formal properties of a skew-symmetric tensor and the curl of a vector in a coordinate manifold of three dimensions. It also explains Riemann spaces, affinely connected spaces, normal coordinates, and the general theory of extension. The book explores differential invariants, transformation groups, Euclidean metric space, and the Frenet formulae. The text describes curves in space, surfaces in space, mixed surfaces, space tensors, including the formulae of Gaus and Weingarten. It presents the equations of two scalars K and Q which can be defined over a regular surface S in a three dimensional Riemannian space R. In the equation, the scalar K, which is an intrinsic differential invariant of the surface S, is known as the total or Gaussian curvature and the scalar U is the mean curvature of the surface. The book also tackles families of parallel surfaces, developable surfaces, asymptotic lines, and orthogonal ennuples. The text is intended for a one-semester course for graduate students of pure mathematics, of applied mathematics covering subjects such as the theory of relativity, fluid mechanics, elasticity, and plasticity theory.
Download or read book Manifolds Tensor Analysis and Applications written by Ralph Abraham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide core material in nonlinear analysis for mathematicians, physicists, engineers, and mathematical biologists. The main goal is to provide a working knowledge of manifolds, dynamical systems, tensors, and differential forms. Some applications to Hamiltonian mechanics, fluid me chanics, electromagnetism, plasma dynamics and control thcory arc given in Chapter 8, using both invariant and index notation. The current edition of the book does not deal with Riemannian geometry in much detail, and it does not treat Lie groups, principal bundles, or Morse theory. Some of this is planned for a subsequent edition. Meanwhile, the authors will make available to interested readers supplementary chapters on Lie Groups and Differential Topology and invite comments on the book's contents and development. Throughout the text supplementary topics are given, marked with the symbols ~ and {l:;J. This device enables the reader to skip various topics without disturbing the main flow of the text. Some of these provide additional background material intended for completeness, to minimize the necessity of consulting too many outside references. We treat finite and infinite-dimensional manifolds simultaneously. This is partly for efficiency of exposition. Without advanced applications, using manifolds of mappings, the study of infinite-dimensional manifolds can be hard to motivate.
