Download or read book Design and Construction of a Tensegrity Tower A Visual and Statistical Case Study of a Tensegrity System written by Angelina Aziz and published by GRIN Verlag. This book was released on 2017-09-06 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Report from the year 2017 in the subject Engineering - General, grade: 1,7, Hochschule Ostwestfalen-Lippe - University of Applied Sciences, language: English, abstract: Until now, tensegrity structures receive less importance in civil engineering, but they are more po- pular with the visual arts. Tensegrities are of interest in structural design studies because of their lightweight property, aesthetic and modern look. Usually, the structures are built in such a way that struts are connected, which might not be the original definition for tensegrity. Open tensegrity systems must, in order to be stable, provide forces to the foundation or to secondary constructions that are beyond the scope of the forces resulting from their own weight and the external loads. Open systems have the advantage that the pressure elements don’t have to be used as diagonals, as in closed systems. As a result, shorter pressure sections are possible with open systems, which can be executed with a smaller cross section. A closed tensegrity system is a self-sufficient array of struts and tendons, arranged in such a way that the struts and tendons enforce an ongoing structural integrity in the overall assemblage. These are termed as “real” tensegrity systems. Closed systems are, regardless of their storage, inherently stable.
Download or read book Tensegrity Structures Design Methods written by Oren Vilnay and published by CRC Press. This book was released on 2023-10-05 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensegrity structures are pre-stressed systems of cables and bars in which no bar is connected to the other and the structure has no continuous rigid skeleton. This general introduction presents an original general method for the design of tensegrity structures, the first configurations of which were found by trial and error. The book begins with two-dimensional tensegrity structures, particularly tensegrity nets, tensegrity chains, tensegrity rings and tensegrity arches. These are then developed to original configurations of spatial tensegrity structures such as tensegrity slabs, primitive spatial tensegrity arches, and primitive tensegrity domes, as well as more elaborate spatial tensegrity structures such as tensegrity cylindrical shells, slim tensegrity domes, tensegrity vaults, and tensegrity caps. Presents a robust new approach to the design of tensegrity structures Extends tensegrity structures to new three-dimensional configurations Tensegrity Structures Design Methods suits structural, civil, and mechanical engineers and architects, as well as graduate students. Oren Vilnay is Professor Emeritus and was founder and head of the Department of Structural Engineering at Ben Gurion University Israel. He is also former head of the Structural Engineering Section at Technion—Israel Institute of Technology. Leon Chernin is Lecturer at the University of Dundee. He was granted a PhD in Structural Engineering from the Technion—Israel Institute of Technology. His research activities encompass both physical testing and numerical modelling.
Download or read book Tensegrity Structures and their Application to Architecture written by Valentín Gómez Jáuregui and published by Ed. Universidad de Cantabria. This book was released on 2020-11-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensegrity structures are really intriguing: bars floating in the air, without any contact to a solid support, attached only by wires to other bars… that are also floating in the air! The aim of this work is to serve as an introduction to such an atypical kind of structure. It tries to explain everything about the controversial origins and polemic fatherhood; tensegrities from various fields, other than Architecture, structural principles, characteristics, advantages and weakness; precedent and current works and patents; and finally, some new proposals, proving that it is possible to find some applications to architectural and engineering purposes. In conclusion, this work tries to be a guide and reference to a new world of structural possibilities that is blooming and finding its path.
Download or read book Tensegrity written by René Motro and published by Elsevier. This book was released on 2003-06-01 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tensegrity results from the contraction of ‘tensional’ and ‘integrity’, a word created by Richard Buckminster Fuller. He went on to describe tensegrity structures as ‘islands of compression in an ocean of tension’, and René Motro has developed a comprehensive definition which is ‘systems in a stable self equilibriated system comprising a discontinuous set of compressed components inside a continuum of tensioned components’. This publication represents the life work of a leading exponent of a revolutionary and exciting method of structural design. * Represents the life work of a leading exponent of a revolutionary and exciting method of structural design* Applicable to architecture as an established structural system, can also be applied to other fields* Design professionals will be able to design better structures. Interested non-professionals will experience the great pleasure of being able to say "I understand why the Hisshorn tower stands up"
Download or read book Deployable Tensegrity Towers written by Jean-Paul Pinaud and published by . This book was released on 2005 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tensegrity Structures written by Jing Yao Zhang and published by Springer. This book was released on 2015-03-17 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: To facilitate a deeper understanding of tensegrity structures, this book focuses on their two key design problems: self-equilibrium analysis and stability investigation. In particular, high symmetry properties of the structures are extensively utilized. Conditions for self-equilibrium as well as super-stability of tensegrity structures are presented in detail. An analytical method and an efficient numerical method are given for self-equilibrium analysis of tensegrity structures: the analytical method deals with symmetric structures and the numerical method guarantees super-stability. Utilizing group representation theory, the text further provides analytical super-stability conditions for the structures that are of dihedral as well as tetrahedral symmetry. This book not only serves as a reference for engineers and scientists but is also a useful source for upper-level undergraduate and graduate students. Keeping this objective in mind, the presentation of the book is self-contained and detailed, with an abundance of figures and examples.
Download or read book Biotensegrity written by Graham Melvin Scarr and published by Jessica Kingsley Publishers. This book was released on 2019-03-25 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emerging science of biotensegrity provides a fresh context for rethinking our understanding of human movement, but its complexities can be formidable. Biotensegrity: The Structural Basis of Life, Second edition - now with full color illustrations throughout - explores and explains the concept of biotensegrity and provides an understanding and appreciation of anatomy and physiology in the light of the latest research findings. The reader learns that biotensegrity is an evolving science which gives researchers, teachers, and practitioners across a wide range of specialisms, including bodyworkers and movement teachers, a deeper understanding of the structure and function of the human body. They are then able to develop clinical practice and skills in light of this understanding, leading to more effective therapeutic approaches, with the aim of improved client outcomes. The second edition provides expanded coverage of the developmental and therapeutic aspects of biotensegrity. Coverage now includes: A more thorough look at life's internal processes Closed kinematic chains as the new biomechanics Embryological development as an evolutionary process The human body as a constantly evolving system based on a set of unchanging principles Emergence, heterarchies, soft-matter and small-world networks A deeper look at what constitutes the therapeutic process
Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Tensegrity Systems written by Robert E. Skelton and published by Springer Science & Business Media. This book was released on 2009-06-04 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses analytical tools for designing energy efficient and lightweight structures that embody the concept of tensegrity. The book provides both static and dynamic analysis of special tensegrity structural concepts, which are motivated by biological material architecture. This is the first book written to attempt to integrate structure and control design.
Download or read book Novel Approaches in Civil Engineering written by Michel Fremond and published by Springer Science & Business Media. This book was released on 2013-09-10 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this edited book various novel approaches to problems of current interest in civil engineering are demonstrated. The topics range from dynamic band seismic problems to the analysis of long-span structures and ancient buildings. Experts associated within the Lagrange Laboratory present recent research results on functionally-graded or composite materials, granular materials, geotechnics, as well as frictional or adhesive contact problems.
Download or read book Advances in Architectural Geometry 2023 written by Kathrin Dörfler and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-10-02 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 34 technical papers presented at the Advances in Architectural Geometry Conference held in Stuttgart 2023. Modern geometric computing increasingly plays a role in modeling environments and processing sensing information, providing a variety of tools for the efficient design, analysis, and manufacturing of complex shapes. The research area of architectural geometry (AG) has emerged at the common border of architecture, applied geometry, computational design, mathematics, and manufacturing. This book presents the state of the art of research in AG.
Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.
Download or read book Tensegrity Minimal Mass Design Control and Experiments written by Waileung Chan and published by . This book was released on 2005 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Economy of Metal Structures written by Károly Jármai and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the International Conference on Design, Fabrication and Economy of Metal Structures held on 24-26 April 2013 in Miskolc, Hungary which contain 99 papers covering: Structural optimization Thin-walled structures Stability Fatigue Frames Fire Fabrication Welding technology Applications Steel-concrete composite Special problems The authors are from 23 different countries, ensuring that the themes covered are of worldwide interest and importance. The International Institute of Welding (IIW), the International Society of Structural and Multidisciplinary Optimization (ISSMO), the TÁMOP 4.2.1.B-10/2/KONV-2010-0001 project entitled “Increasing the quality of higher education through the development of research - development and innovation program at the University of Miskolc supported by the European Union, co-financed by the European Social Fund” and many other sponsors helped organizers to collect these valuable studies, the results of which will provoke discussion, and provide an important reference for civil and mechanical engineers, architects, researchers and structural designers and fabricators, as well as managers in a range of industries including building, transport, shipbuilding, aircraft, chemical and offshore engineering.
Download or read book Space Structures 5 written by G. A. R. Parke and published by Thomas Telford. This book was released on 2002 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings are based on the Fifth International Conference on Space Structures, organised by the University of Surrey. Produced as a 2-volume set, they contain original and innovative information on space structures from leading engineers and architects from around the world.
Download or read book Everything Moves written by Susan Lowell de Solórzano and published by Jessica Kingsley Publishers. This book was released on 2020-10-09 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'What a multi-sensory pleasure in learning! I will be a better teacher and better clinician using what I am learning from this book.' Carol M Davis DPT, EdD, MS, FAPTA The emerging science of biotensegrity provides a fresh context for re-thinking our understanding of human movement, but its complexities can be formidable. Bodywork and movement professionals looking for an accessible and relevant guide to the concept and application of biotensegrity need look no further than Everything Moves: How biotensegrity informs human movement. In order to work with our own bodies and the bodies of our students, clients and teams most effectively, we need to understand the nature of our human structure. Everything Moves offers the enquiring bodyworker or movement professional, who wants to take their understanding of how to apply biotensegrity in their work to the next level, a practical and relatable guide to the biotensegral nature of our bodies, in which all of the parts are one, yet all are constantly changing. Throughout Everything Moves, concepts and ideas are presented with activities and exercises to make them tangible, accessible and applicable. The material presented is suitable for coaches and movement teachers new to biotensegrity, as well as those with more advanced levels of understanding. Whether your focus is performance, sports, Alexander Technique, Feldenkrais, yoga, Pilates, martial arts, or dance, any arena in which bodies move can be informed by Everything Moves!
Download or read book Proceedings of the Canadian Society of Civil Engineering Annual Conference 2021 written by Scott Walbridge and published by Springer Nature. This book was released on 2022-04-13 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the Annual Conference of the Canadian Society of Civil Engineering 2021. The contents of this volume focus on specialty conferences in construction, environmental, hydrotechnical, materials, structures, transportation engineering, etc. This volume will prove a valuable resource for those in academia and industry.
