Download or read book Templated Self assembly for Complex Pattern Fabrication written by Jae-Byum Chang and published by . This book was released on 2014 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: The long-term goal of my Ph.D. study has been controlling the self-assembly of various materials using state-of-the-art nanofabrication techniques. Electron-beam lithography has been used for decades to generate nanoscale patterns, but its throughput is not high enough for fabricating sub-10-nm patterns over a large area. Templated block copolymer(BCP) self assembly is attractive for fabricating few-nanometer-scale structures at high throughput. On an unpattermed substrate, block copolymer self-assembly generates dense arrays of lines or dots without long-range order. Fortunately, physical features defined by electron lithography can guide the self-assembly of block copolymer. In our previous work, the orientation of cylindrical phase block copolymer was controlled simply by changing the distance between physical features, and resulting polymer patterns were analyzed by an image analysis program. Here, we first demonstrated high throughput sub-10-nm feature sizes by applying the same approach to a cylindrical morphology 16kg/mol PS-PDMS block copolymer. The half-pitch of the PDMS cylinders of this block copolymer film is 9 nm, so sub-10-nm structures can be fabricated. We also applied the similar approach to a triblock terpolymer to achieve dot patterns with square symmetry. To achieve a more complex pattern, electron-beam induced cross-linking of a block copolymer and second solvent-annealing process was used. By using this method, a line-dot hybrid pattern was achieved. Despite that the block copolymer self-assembly area had been heavily studied, researchers had yet to ascertain how to design nanostructures to achieve a desired target pattern using block copolymers. To address this problem, we developed a modular method that greatly simplifies the nanostructure design, and using this method, we achieved a circuit-like block-copolymer pattern over a large area. The key innovation is the use of a binary set of tiles that can be used to very simply cover the desired patterning area. Despite the simplicity of the approach, by exploiting neighbor-neighbor interactions of the tiles, a complex final pattern can be formed. The vision is thus one of programmability of patterning by using a simple instruction set. This development will thus be of interest to scientists and engineers across many fields involving self-assembly, including biomolecule, quantum-dot or nanowire positioning; algorithmic self-assembly; and integrated-circuit development. We applied this concept - controlling the assembly of materials using nanostructures - to a different material, protein. Single-molecule protein arrays are useful tools for studying biological phenomena at the single-molecule level, but have been developed only for a few specific proteins using the streptavidin-biotin complex as a linker. By using carefully designed gold nanopatterns and cysteine-gold interaction, we developed a process to make single-molecule protein arrays that can be used for patterning a broad range of proteins.
Download or read book Templated Self assembly of Novel Block Copolymers written by Li-Chen Cheng (Ph.D.) and published by . This book was released on 2019 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-assembly of block copolymers (BCPs) is emerging as a promising route for numerous technological applications to fabricate a variety of nanoscopic structures. The resulting feature sizes range from a few to several hundred nanometers, and are readily tunable by varying the molecular weights of block copolymers. Directed self-assembly of block copolymer is an effective way to pattern periodic arrays of features with long-range order, to generate complex patterns, and to multiplicatively increase the pattern density and resolution that are far beyond the limit of conventional lithography. Despite of the significant progress in the area of directed self-assembly in recent years, critical research problems regarding the dimension scalability toward sub-10-nm regime and large feature sizes on hundreds of nanometers scale as well as the capability of generating complex device-oriented patterns remain challenging. In this thesis, BCP systems, including high-v BCPs that are capable of self-assembling into extreme small and large feature sizes as well as those with more complex block architectures, are identified and studied in order to understand how those materials may be processed and directed selfassembly to bridge the patterning size spectrum between nano- and micro-fabrication. Another focus is placed on the scientific exploration of directed self-assembly of triblock terpolymers and the investigation on the mechanisms that regulate the scaling and geometry of self-assembled patterns. A comprehensive understanding about self-assembly of BCP thin films will enable developing device-oriented geometries, manipulating BCPs phase behavior, and incorporating new functional materials for a wider range of applications. In the meanwhile, optimizing the processing condition of self-assembly of various BCPs is essential to confirm viability of the directed self-assembly of block copolymers process in manufacturing.
Download or read book Directed Self assembly of Block Co polymers for Nano manufacturing written by Roel Gronheid and published by Woodhead Publishing. This book was released on 2015-07-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The directed self-assembly (DSA) method of patterning for microelectronics uses polymer phase-separation to generate features of less than 20nm, with the positions of self-assembling materials externally guided into the desired pattern. Directed self-assembly of Block Co-polymers for Nano-manufacturing reviews the design, production, applications and future developments needed to facilitate the widescale adoption of this promising technology. Beginning with a solid overview of the physics and chemistry of block copolymer (BCP) materials, Part 1 covers the synthesis of new materials and new processing methods for DSA. Part 2 then goes on to outline the key modelling and characterization principles of DSA, reviewing templates and patterning using topographical and chemically modified surfaces, line edge roughness and dimensional control, x-ray scattering for characterization, and nanoscale driven assembly. Finally, Part 3 discusses application areas and related issues for DSA in nano-manufacturing, including for basic logic circuit design, the inverse DSA problem, design decomposition and the modelling and analysis of large scale, template self-assembly manufacturing techniques. Authoritative outlining of theoretical principles and modeling techniques to give a thorough introdution to the topic Discusses a broad range of practical applications for directed self-assembly in nano-manufacturing Highlights the importance of this technology to both the present and future of nano-manufacturing by exploring its potential use in a range of fields
Download or read book Complex Macromolecular Architectures written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of CMA (complex macromolecular architecture) stands at the cutting edge of materials science, and has been a locus of intense research activity in recent years. This book gives an extensive description of the synthesis, characterization, and self-assembly of recently-developed advanced architectural materials with a number of potential applications. The architectural polymers, including bio-conjugated hybrid polymers with poly(amino acid)s and gluco-polymers, star-branched and dendrimer-like hyperbranched polymers, cyclic polymers, dendrigraft polymers, rod-coil and helix-coil block copolymers, are introduced chapter by chapter in the book. In particular, the book also emphasizes the topic of synthetic breakthroughs by living/controlled polymerization since 2000. Furthermore, renowned authors contribute on special topics such as helical polyisocyanates, metallopolymers, stereospecific polymers, hydrogen-bonded supramolecular polymers, conjugated polymers, and polyrotaxanes, which have attracted considerable interest as novel polymer materials with potential future applications. In addition, recent advances in reactive blending achieved with well-defined end-functionalized polymers are discussed from an industrial point of view. Topics on polymer-based nanotechnologies, including self-assembled architectures and suprastructures, nano-structured materials and devices, nanofabrication, surface nanostructures, and their AFM imaging analysis of hetero-phased polymers are also included. Provides comprehensive coverage of recently developed advanced architectural materials Covers hot new areas such as: click chemistry; chain walking; polyhomologation; ADMET Edited by highly regarded scientists in the field Contains contributions from 26 leading experts from Europe, North America, and Asia Researchers in academia and industry specializing in polymer chemistry will find this book to be an ideal survey of the most recent advances in the area. The book is also suitable as supplementary reading for students enrolled in Polymer Synthetic Chemistry, Polymer Synthesis, Polymer Design, Advanced Polymer Chemistry, Soft Matter Science, and Materials Science courses. Color versions of selected figures can be found at www.wiley.com/go/hadjichristidis
Download or read book Evaporative Self assembly of Ordered Complex Structures written by Zhiqun Lin and published by World Scientific. This book was released on 2012 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of spontaneous self-assembly, as a lithographic tool and as an external field-free means to construct well-ordered and intriguing patterns, has received much attention. This book offers a spectrum of experimental and theoretical advances in evaporative self-assembly techniques.
Download or read book Synthesis and Applications of Copolymers written by Anbanandam Parthiban and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the reactivity of monomers is crucial in creating copolymers and determining the outcome of copolymerization. Covering the fundamental aspects of polymerization, Synthesis and Applications of Copolymers explores the reactivity of monomers and reaction conditions that ensure that the newly formed polymeric materials exhibit desired properties. Referencing a wide-range of disciplines, the book provides researchers, students, and scientists with the preparation of a diverse variety of copolymers and their recent developments, with a particular focus on copolymerization, crystallization, and techniques like nanoimprinting and micropatterning.
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students.Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices.
Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.
Download or read book Optical Nano and Micro Actuator Technology written by George K. Knopf and published by CRC Press. This book was released on 2017-12-19 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Optical Nano and Micro Actuator Technology, leading engineers, material scientists, chemists, physicists, laser scientists, and manufacturing specialists offer an in-depth, wide-ranging look at the fundamental and unique characteristics of light-driven optical actuators. They discuss how light can initiate physical movement and control a variety of mechanisms that perform mechanical work at the micro- and nanoscale. The book begins with the scientific background necessary for understanding light-driven systems, discussing the nature of light and the interaction between light and NEMS/MEMS devices. It then covers innovative optical actuator technologies that have been developed for many applications. The book examines photoresponsive materials that enable the design of optically driven structures and mechanisms and describes specific light-driven technologies that permit the manipulation of micro- and nanoscale objects. It also explores applications in optofluidics, bioMEMS and biophotonics, medical device design, and micromachine control. Inspiring the next generation of scientists and engineers to advance light-driven technologies, this book gives readers a solid grounding in this emerging interdisciplinary area. It thoroughly explains the scientific language and fundamental principles, provides a holistic view of optical nano and micro actuator systems, and illustrates current and potential applications of light-driven systems.
Download or read book Design of Polymeric Platforms for Selective Biorecognition written by Juan Rodríguez-Hernández and published by Springer. This book was released on 2015-08-21 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses in an integrated manner all the critical aspects for building the next generation of biorecognition platforms - from biomolecular recognition to surface fabrication. The most recent strategies reported to create surface nano and micropatterns are thoroughly analyzed. This book contains descriptions of the types of molecules immobilized at surfaces that can be used for specific biorecognition, how to immobilize them, and how to control their arrangement and functionality at the surface. Small molecules, peptides, proteins and oligonucleotides are at the core of the biorecognition processes and will constitute a special part of this book. The authors include detailed information on biological processes, biomolecular screening, biosensing, diagnostic and detection devices, tissue engineering, development of biocompatible materials and biomedical devices.
Download or read book Microfabrication and Nanofabrication written by Kanak Kalita and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-06-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book unravels the intriguing interplay between macroscopic manufacturing processes and microscopic fabrication techniques. It dives into the sophisticated world of precision manufacturing, where high accuracy, controlled processes enable the production of complex components and products. It covers micro and nano fabrication, which revolutionizes conventional manufacturing by creating minuscule yet highly functional parts, some even smaller than the width of a human hair. This book explores various topics, from precise machining techniques to nanoimprint technology, reflecting the vast breadth and depth of this field. The aim is to provide readers with a comprehensive understanding of how these micro and macro scales intertwine, opening new frontiers in manufacturing. By showcasing the latest research findings and their practical applications, this book elucidates the enormous potential and implications of this burgeoning field. The contents are laid out in a user-friendly manner to communicate complex ideas in an accessible, engaging way, making it a valuable resource for anyone curious about the next big leap in manufacturing technology.
Download or read book Frontiers in Optics and Photonics written by Federico Capasso and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-06-08 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a cutting-edge research overview on the latest developments in the field of Optics and Photonics. All chapters are authored by the pioneers in their field and will cover the developments in Quantum Photonics, Optical properties of 2D Materials, Optical Sensors, Organic Opto-electronics, Nanophotonics, Metamaterials, Plasmonics, Quantum Cascade lasers, LEDs, Biophotonics and biomedical photonics and spectroscopy.
Download or read book Handbook of Food Science Technology and Engineering written by Yiu H. Hui and published by CRC Press. This book was released on 2006 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaporative Self assembly Of Ordered Complex Structures written by Zhiqun Lin and published by World Scientific. This book was released on 2012-02-28 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of spontaneous self-assembly, as a lithographic tool and as an external field-free means to construct well-ordered and intriguing patterns, has received much attention due to its ease of producing complex, large-scale structures with small feature sizes. An extremely simple route to highly-ordered, complex structures is the evaporative self-assembly of nonvolatile solutes (e.g., polymers, nanoparticles, carbon nanotubes, and DNA) from a sessile droplet on a solid substrate. To date, a few studies have elegantly demonstrated that self-organized nanoscale, microscale, and hierarchically structured patterns have been readily obtained from sophisticated control of droplet evaporation. These include convective assembly in evaporating menisci, the alignment of nanomaterials by programmed dip coating and controlled anisotrophic wetting/dewetting processes, facile microstructuring of functional polymers by the “Breath Figure” method, controlled evaporative self-assembly in confined geometries, etc.This book is unique in this regard in providing a wide spectrum of recent experimental and theoretical advances in evaporative self-assembly techniques. The ability to engineer an evaporative self-assembly process that yields a broad range of complex, well-ordered and intriguing structures with small feature sizes composed of polymers of nanocrystals of different size and shapes as well as DNA over large areas offers tremendous potential for applications in electronics, optoelectronics, photonics, sensors, information processing and data storage devices, nanotechnology, high-throughput drug discovery, chemical detection, combinatorical chemistry, and biotechnology.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2017-11-05 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for anyone working in the rapidly evolving field of key technology, including mechanical and electrical engineers, materials scientists, physicists, and chemists.
Download or read book Nanotechnology written by Lifeng Chi and published by John Wiley & Sons. This book was released on 2010-08-09 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This front line reference investigates nanostructured surfaces, invisible to the naked eye. Machinery and processes explained in a logical fashion. Students and professionals will benefit from the knowledge imparted by the prominent authors.
Download or read book Semiconducting Polymer Composites written by Xiaoniu Yang and published by John Wiley & Sons. This book was released on 2012-10-05 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of Semiconducting Polymer Composites describes the principles and concepts of semiconducting polymer composites in general, addressing electrical conductivity, energy alignment at interfaces, morphology, energy transfer, percolation theory and processing techniques. In later chapters, different types of polymer composites are discussed: mixtures of semiconducting and insulating or semiconducting and semiconducting components, respectively. These composites are suitable for a variety of applications that are presented in detail, including transistors and solar cells, sensors and detectors, diodes and lasers as well as anti-corrosive and anti-static surface coatings.
