Download or read book Temperature Prediction Model for Horizontal Well with Multiple Fractures in Shale Reservoir written by Nozomu Yoshida and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture diagnostics is a key technology for well performance prediction of a horizontal well in a shale reservoir. The combination of multiple fracture diagnostic techniques gives reliable results, and temperature data has potential to provide more reliability on the results. In this work, we show an application of a temperature prediction model for a horizontal well with multiple hydraulic fractures in order to investigate the possibility of evaluating reservoir and hydraulic fracture parameters using temperature data. The model consists of wellbore model and reservoir model. The wellbore model was formulated based on mass, momentum and energy balance. The reservoir flow model was solved by a numerical reservoir simulation, and the reservoir thermal model was formulated by transient energy balance equation considering viscous dissipation heating and temperature variation caused by fluid expansion besides heat conduction and convection. The reservoir flow and reservoir thermal model were coupled with the wellbore model to predict temperature distribution in a horizontal well considering boundary conditions at the contact of reservoir and wellbore. In the reservoir system, primary hydraulic fractures which are transverse to the horizontal well were modeled with thin grid cells explicitly, and the hydraulically-induced fracture network around the horizontal well was modeled as higher permeable zone to unstimulated matrix zone. The reservoir grids between two primary fractures were logarithmically spaced in order to capture transient flow behavior. We applied the model to synthetic examples: horizontal well with identical five fractures and with different five fractures. The results show two fundamental mechanisms: heat conduction between formation and wellbore fluid at non-perforated zone, and wellbore fluid mixing effect at each fracture. The synthetic example with identical fractures shows that fracture locations affect wellbore temperature distribution because of fluid mixing effect between reservoir inflow and wellbore fluid. And also, the synthetic example with different fractures shows that the fracture heterogeneity causes different magnitude of temperature change due to inflow variation per fracture. In addition, the model was applied to synthetic examples without network fracture region in order to find the effects by the network. It reveals that under constant rate condition, network fracture masks large temperature change due to small pressure change at the contact between fracture and formation, and that under constant BHP condition, network fracture augments temperature change with the increase of flow rate in wellbore and inflow rate from reservoir. Sensitivity studies were performed on temperature distribution to identify influential parameters out of the reservoir and hydraulic fracture parameters including reservoir porosity, reservoir permeability, fracture half-length, fracture height, fracture permeability, fracture porosity, fracture network parameters, and fracture interference between multiple clusters. In this work, in order to find contributions by a target fracture, temperature change sensitivity is evaluated. Single fracture case reveals that fracture permeability, network fracture parameters and fracture geometries are primary influential parameters on temperature change at the fracture location. And also, multiple fractures case shows that temperature change is augmented with the increase of fracture geometry and is decreased with the increase of fracture permeability. These results show the possibility of using temperature to determine these sensitive parameters, and also the quantified parameter sensitivities provide better understandings of the temperature behavior of horizontal well with multiple fractures. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/149366

Download or read book Modeling of Multi Stage Fractured Horizontal Wells written by Shanshan Yao and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Temperature Prediction Model for a Producing Horizontal Well written by Pinan Dawkrajai and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed temperature sensors (DTS) are increasingly used for monitoring producing sections of horizontal wells. The temperature data from DTS are reliable, accurate and continuous in time (readings every few minutes) and space (readings every meter). One of the potential uses of DTS is to infer the amount and types of fluid entering horizontal sections. To perform such an inference requires a temperature model. A new analytical model was developed here for predicting the inflow temperature of a fluid entering a horizontal wellbore during production. The distinguishing aspect of the model is that it accounts for subtle thermal energy effects including fluid expansion, viscous dissipative heating, and thermal conduction. Reservoir inflow and wellbore flow are coupled by modeling the reservoir as multi-segmented reservoirs in which the direction of flow in the reservoir is perpendicular (not parallel) to the wellbore. The coupled model is then used to simulate several examples to illustrate how temperature changes with flow rate and type of fluid entering a wellbore. We further develop a numerical temperature model of a bottom water drive reservoir to demonstrate the uses of temperature profiles in detecting water entries. Water in this numerical model is initially located in a deeper and warmer zone below a horizontal well. Results show that oil or water can enter the wellbore 2-3 oF higher, while gas can enter with 5-6 oF lower, than the geothermal temperature. Inflow temperature causes the slope of the wellbore temperature profile to change notably, depending on the flow rates and types of fluid entering. The temperature profile can locate a zone that is producing excessive water or gas if the rate is large. The size of the temperature changes on the profiles is obviously detectable by DTS, which has a resolution as fine as 0.0045 oF for the time and spatial average of 1 hour and 50 feet if the cable range is less than 3,000 feet. This study has confirmed the uses of DTS in reservoir monitoring of a horizontal production well.

Download or read book Well Production Performance Analysis for Shale Gas Reservoirs written by Liehui Zhang and published by Elsevier. This book was released on 2019-05-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Production Performance Analysis for Shale Gas Reservoirs, Volume 66 presents tactics and discussions that are urgently needed by the petroleum community regarding unconventional oil and gas resources development and production. The book breaks down the mechanics of shale gas reservoirs and the use of mathematical models to analyze their performance. Features an in-depth analysis of shale gas horizontal fractured wells and how they differ from their conventional counterparts Includes detailed information on the testing of fractured horizontal wells before and after fracturing Offers in-depth analysis of numerical simulation and the importance of this tool for the development of shale gas reservoirs

Download or read book Analytical Modeling of Multi Fractured Horizontal Wells in Heterogeneous Unconventional Reservoirs written by Jie Zeng and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current analytical models for multi-fractured horizontal wells (MFHW) generally neglect reservoir heterogeneity, typical seepage characters of unconventional reservoir, partially penetrating fracture and various fracture damage mechanisms. In this thesis, three linear flow models have been developed to facilitate pressure and rate behavior analysis of shale, tight sand and unconventional reservoir with damaged fractures. These models are validated by comparing with KAPPA Ecrin and are more accurate than previous linear flow models in modeling partially penetrating cases. Field data are analyzed and results prove the reliability of these models. The first model is for heterogeneous shale reservoir with multiple gas transport mechanisms. It subdivides the reservoir into seven parts, namely, two upper/lower regions, two outer regions, two inner regions, and hydraulic fracture region. Fracture interference is simulated by locating a no-flow boundary between two adjacent fractures. The locations of these boundaries are determined based on the boundary's pressure to satisfy the no-flow assumption. Adsorption/desorption, gas slippage and diffusion effects are included for rigorous modeling of flow in shale. Sensitivity analysis results suggest that larger desorption coefficient causes smaller pressure and its derivative as a larger proportion of gas is desorbed in formation and contributes to productivity. The influences of other parameters, such as matrix II permeability, matrix block size, secondary fracture permeability, hydraulic fracture conductivity, and fracture pattern are also discussed. The second model is for heterogeneous tight sand reservoir with threshold pressure gradient (TPG). The linear flow sub-regions are the same as those of the first model. TPG and pressure drop within the horizontal wellbore are included. Simulation results suggest that TPG affects middle-late time behaviors. Greater TPG results in higher pressure drop and accelerates production decline. But this influence is marginal when TPG is small. Effects of other parameters, such as formation permeability, fracture length, conductivity, and wellbore storage are also investigated. The third model is for heterogeneous reservoir with various fracture damage. In this model, the following possible fracture damage situations are discussed: (1) choked fracture damage (2) partially propped fracture, (3) fracturing fluid leak-off damage, (4) dual or multiple damage effects. Simulation results indicate that choked frature damage influences early-mid time performance. Partially propped section within fracture dominates formation linear flow regime. Only severe matrix impairment near fracture face can have noticeable effects on pressure and rate response. A new parameter, skin factor ratio, is applied to describe the relative magnitude of multiple damage mechanisms. Reservoir heterogeneity and fracture damage make the pressure and rate behaviors deviate significantly from undamaged one but one can distinguish major damage mechanisms even in heterogeneous reservoir.

Download or read book The Performance of Fractured Horizontal Well in Tight Gas Reservoir written by Jiajing Lin and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontal wells have been used to increase reservoir recovery, especially in unconventional reservoirs, and hydraulic fracturing has been applied to further extend the contact with the reservoir to increase the efficiency of development. In the past, many models, analytical or numerical, were developed to describe the flow behavior in horizontal wells with fractures. Source solution is one of the analytical/semi-analytical approaches. To solve fractured well problems, source methods were advanced from point sources to volumetric source, and pressure change inside fractures was considered in the volumetric source method. This study aims at developing a method that can predict horizontal well performance and the model can also be applied to horizontal wells with multiple fractures in complex natural fracture networks. The method solves the problem by superposing a series of slab sources under transient or pseudosteady-state flow conditions. The principle of the method comprises the calculation of semi-analytical response of a rectilinear reservoir with closed outer boundaries. A statistically assigned fracture network is used in the study to represent natural fractures based on the spacing between fractures and fracture geometry. The multiple dominating hydraulic fractures are then added to the natural fracture system to build the physical model of the problem. Each of the hydraulic fractures is connected to the horizontal wellbore, and the natural fractures are connected to the hydraulic fractures through the network description. Each fracture, natural or hydraulically induced, is treated as a series of slab sources. The analytical solution of superposed slab sources provides the base of the approach, and the overall flow from each fracture and the effect between the fractures are modeled by applying superposition principle to all of the fractures. It is assumed that hydraulic fractures are the main fractures that connect with the wellbore and the natural fractures are branching fractures which only connect with the main fractures. The fluid inside of the branch fractures flows into the main fractures, and the fluid of the main fracture from both the reservoir and the branch fractures flows to the wellbore. Predicting well performance in a complex fracture network system is extremely challenged. The statistical nature of natural fracture networks changes the flow characteristic from that of a single linear fracture. Simply using the single fracture model for individual fracture, and then adding the flow from each fracture for the network could introduce significant error. This study provides a semi-analytical approach to estimate well performance in a complex fracture network system.

Download or read book Hydraulic Fracture Modeling written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2017-11-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today’s petroleum engineer with an all-inclusive product to characterize and optimize today’s more complex reservoirs. Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics Provides today’s petroleum engineer with model validation tools backed by real-world case studies

Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.

Download or read book Alternate Representations for Numerical Modeling of Multi stage Hydraulically Fractured Horizontal Wells in Shale Gas Reservoirs written by Nithiwat Siripatrachai and published by . This book was released on 2011 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Multi fractured Horizontal Wells as Linear Composite Reservoirs Application to Single Phase Tight Gas Shale Gas and Tight Oil Systems written by Imad Brohi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Method of Distributed Volumetric Sources for Forecasting the Transient and Pseudo steady State Productivity of Multiple Transverse Fractures Intersected by a Horizontal Well written by Diangeng Fan and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This work of well performance modeling is focused on solving problems of transient and pseudo-steady state fluid flow in a rectilinear closed boundaries reservoir. This model has been applied to predict and to optimize gas production from a horizontal well intercepted by multiple transverse fractures in a bounded reservoir, and it also provides well-testing solutions. The well performance model is designed to provide enhanced efficiency with the same reliability for pressure transient analysis, and well performance prediction, especially in complex well fracture configuration. The principle is to simplify the calculation of the pressure response to an instantaneous withdraw, which happens in other fractures, within a shorter computational time. This pressure response is substituted with the interaction between the two whole fractures. This method is validated through comparison to results of rigorous Distributed Volumetric Sources (DVS) method in simple symmetric fracture configuration, and to results of field production data for complex well/fracture configuration of a tight gas reservoir. The results show a good agreement in both ways. This model indicates the capability to handle the situations, such as: various well drainages, asymmetry of the fracture wings, and curved horizontal well. The advantage of this well performance model is to provide faster processing - reducing the computational time as the number of fractures increase. Also, this approach is able to be applied as an optimization and screening tool to obtain the best fracture configurations for reservoir development of economically marginal fields, in terms of the number and dimensions of fractures per well, also with external economic and operational constraints.

Download or read book Development of Unconventional Reservoirs written by Reza Rezaee and published by MDPI. This book was released on 2020-04-16 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for energy is increasing and but the production from conventional reservoirs is declining quickly. This requires an economically and technically feasible source of energy for the coming years. Among some alternative future energy solutions, the most reasonable source is from unconventional reservoirs. As the name “unconventional” implies, different and challenging approaches are required to characterize and develop these resources. This Special Issue covers some of the technical challenges for developing unconventional energy sources from shale gas/oil, tight gas sand, and coalbed methane.

Download or read book Evaluation of mathematical models for temperature prediction in deep reservoirs written by F.L. Parker and published by Рипол Классик. This book was released on 1975 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Pressure Data from the Horizontal Wells with Multiple Hydraulic Fractures in Shale Gas written by Essa M. Tabar and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analytical Trilinear Pressure Transient Model for Multiply Fractured Horizontal Wells in Tight Shale Reservoirs written by Margaret L. Brown and published by . This book was released on 2009 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interpreting Horizontal Well Flow Profiles and Optimizing Well Performance by Downhole Temperature and Pressure Data written by Zhuoyi Li and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizontal well temperature and pressure distributions can be measured by production logging or downhole permanent sensors, such as fiber optic distributed temperature sensors (DTS). Correct interpretation of temperature and pressure data can be used to obtain downhole flow conditions, which is key information to control and optimize horizontal well production. However, the fluid flow in the reservoir is often multiphase and complex, which makes temperature and pressure interpretation very difficult. In addition, the continuous measurement provides transient temperature behavior which increases the complexity of the problem. To interpret these measured data correctly, a comprehensive model is required. In this study, an interpretation model is developed to predict flow profile of a horizontal well from downhole temperature and pressure measurement. The model consists of a wellbore model and a reservoir model. The reservoir model can handle transient, multiphase flow and it includes a flow model and a thermal model. The calculation of the reservoir flow model is based on the streamline simulation and the calculation of reservoir thermal model is based on the finite difference method. The reservoir thermal model includes thermal expansion and viscous dissipation heating which can reflect small temperature changes caused by pressure difference. We combine the reservoir model with a horizontal well flow and temperature model as the forward model. Based on this forward model, by making the forward calculated temperature and pressure match the observed data, we can inverse temperature and pressure data to downhole flow rate profiles. Two commonly used inversion methods, Levenberg- Marquardt method and Marcov chain Monte Carlo method, are discussed in the study. Field applications illustrate the feasibility of using this model to interpret the field measured data and assist production optimization. The reservoir model also reveals the relationship between temperature behavior and reservoir permeability characteristic. The measured temperature information can help us to characterize a reservoir when the reservoir modeling is done only with limited information. The transient temperature information can be used in horizontal well optimization by controlling the flow rate until favorite temperature distribution is achieved. With temperature feedback and inflow control valves (ICVs), we developed a procedure of using DTS data to optimize horizontal well performance. The synthetic examples show that this method is useful at a certain level of temperature resolution and data noise.

Download or read book Fracturing Horizontal Wells written by Mohamed Y. Soliman and published by McGraw Hill Professional. This book was released on 2016-04-21 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effectively Apply Modern Fracturing Methods in Horizontal Wells Improve productivity and maximize natural gas extraction using the practical information contained in this comprehensive guide. Written by world-renowned experts, Fracturing Horizontal Wells features complete details on the latest fracking tools and technologies. Illustrations, tables, and real-world examples are found throughout. Discover how to handle site selection and testing, build accurate simulations, and efficiently extract energy from horizontal sources, including shale formations. Environmental standards, regulatory compliance, and safety protocols are also included. Fracturing Horizontal Wells covers: • Fracture Stimulation of Horizontal Wells • Transitioning from Vertical to Horizontal Wellbores • Reservoir Engineering Aspects of Horizontal Wells • Reservoir Engineering Aspects of Fractured Horizontal Wells • Fracturing Horizontal Wells: Rock Mechanics Overview • Drilling of Horizontal Wells • Proppant and Proppant Transport • Fracture Diagnostic Testing • Interval Isolation • Horizontal Completion Fracturing Methods and Techniques • Use of Well Logging Measurements and Analysis for Fracturing Design • Fracture Treatment Diagnostics • Environmental Stewardship