Download or read book Temperature Dependence of the Properties of Sol gel Derived ZnO Powder written by Jasper H. Wright and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
Download or read book Influence of Annealing Temperature on the Mechanical Properties of Sol gel ZnO Films written by Kyle J. Burrows and published by . This book was released on 2014 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of sol gel science and technology 3 Applications of sol gel technology written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:
Download or read book Smart Ceramics written by Ajay Kumar Mishra and published by CRC Press. This book was released on 2018-03-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in nanotechnology have paved the way for the development of new smart materials. The term "smart ceramics" refers to ceramic materials fabricated from ultrafine particles. They have attracted the attention of researchers and scientists thanks to their potential to manipulate the length scale in the nanorange, leading to better and some unusual material properties. Smart ceramics ensure control of particle size, surface contamination, and degree of agglomeration. They play a crucial role in challenging applications such as bone surgery (e.g., the development of substitutes for load-bearing bone parts) and in biomedical science, especially in tissue engineering, dental applications, and drug and antigen delivery using modified ceramics. Porous nanostructured ceramics have potential use in both simple and complex applications, such as bioimaging, sensors, paints and pigments, optics, and electronics, because of their surface- and size-dependent properties. For the synthesis of smart ceramics, the sol-gel route has been mainly utilized because of its ability to produce a large variety of compositions and to ensure homogeneous mixing of the constituent particles at low temperature. This book describes the innovations in technologies through the development of functionalized ceramic materials for various applications. It also describes recent and expected challenges, along with their potential solutions, in advanced techniques for the synthesis and characterization of nanostructured ceramics and their composites: bioceramics, bioactive ceramics, multifunctional nanoceramics, transparent ceramics, nanocore shells, nanowires, thin films, nanotubes, and nanorods. The applications include the environment, health care, electrochemical sensors, high-temperature superconductors, nuclear reactor fuels, electrical insulators, refractory materials, electrical transformers, and magnetic core memory. The book will benefit researchers, scientists, engineers, and technologists working in the industry and in national and international research laboratories; academics who are interested in traditional and advanced smart ceramic composites; and students pursuing their postgraduate, graduate, and undergraduate degrees in smart ceramics, nanomaterials, nanoscience, and engineering.
Download or read book Preparation and Properties of Sol gel Derived PZT Powders written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sol Gel Materials written by John D. Wright and published by CRC Press. This book was released on 2018-10-03 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel processing methods, first used historically for decorative and constructional materials, were extensively developed in the last century for applications such as glasses, ceramics, catalysts, coatings, composites and fibres. Today they are reaching their full potential, enabling the preparation of new generations of advanced materials not easily accessible by other methods yet using mild, low-energy conditions. The topic is therefore increasingly included in advanced undergraduate, MSc and PhD programmes in the areas of chemistry, physics and materials science. This concise introductory text, written at the advanced undergraduate/first-year postgraduate level, is also suitable as an introduction to the development, mechanisms, chemistry, characterisation methods and applications of the technique. It provides readers with an extensive yet concise grounding in the theory of each area of the subject and details the real and potential applications and the future prospects of sol-gel chemistry.
Download or read book Zinc Oxide written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic, authoritative and thorough treatment in one comprehensive volume presents the fundamentals and technologies of the topic, elucidating all aspects of ZnO materials and devices. Following an introduction, the authors look at the general properties of ZnO, as well as its growth, optical processes, doping and ZnO-based dilute magnetic semiconductors. Concluding sections treat bandgap engineering, processing and ZnO nanostructures and nanodevices. Of interest to device engineers, physicists, and semiconductor and solid state scientists in general.
Download or read book Nanostructured Materials written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2017-07-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: There continues to be a worldwide interest in the size-dependent properties of nanostructured materials and their applications in many diverse fields such as catalysis, sensors, energy conversion processes, and biomedicine to name a few. The eleven chapters of this book written by different researchers include four chapters on the different methods of fabrication of specific materials followed by characterization of their properties, and the remaining seven chapters focusing on the fabrications and applications including three chapters on biomedical applications, two chapters on sensors, one chapter on solar cells, and one chapter on the use of nanoparticles in herbicides. These chapters provide up-to-date reviews useful for current and future researchers in these specific areas.
Download or read book Zinc Oxide Nanostructures written by Magnus Willander and published by CRC Press. This book was released on 2014-07-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide (ZnO) in its nanostructured form is emerging as a promising material with great potential for the development of many smart electronic devices. This book presents up-to-date information about various synthesis methods to obtain device-quality ZnO nanostructures. It describes both high-temperature (over 100 C) and low-temperature (under
Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.
Download or read book Optimization of the Process for Sol gel Derived ZnO written by Matthew Nagorski and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent and conducting Al-doped ZnO thin films with c-axis-preferred orientation were prepared on glass substrate via sol-gel route. The physical, optical and electrical properties were investigated to determine an optimal withdrawal speed, aluminum source and treatment in order to obtain a smooth, dense, highly crystalline, conductive and transparent thin film with a high figure of merit for transparent conducting oxide applications. An optimal withdrawal speed was found to be 2.5 cm/min. Optimal aluminum source and concentration was found to be 0.5 at.% using aluminum chloride hexahydrate. An additional treatment in an N2 environment was found to be the best method to improve the electrical properties of the films while maintaining high crystallinity and transparency.
Download or read book Sol gel Based Nanoceramic Materials Preparation Properties and Applications written by Ajay Kumar Mishra and published by Springer. This book was released on 2016-12-10 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes recent research and development in the field of nanostructured ceramics and their composites. It presents selected examples of ceramic materials with special electronic, catalytic and optical properties and exceptional mechanical characteristics. A special focus is on sol-gel based and organic-inorganic hybrid nanoceramic materials. The book highlights examples for preparation techniques including scale-up, properties of smart ceramic composites, and applications including e.g. waste water treatment, heavy metal removal, sensors, electronic devices and fuel cells. Recent challenges are addressed and potential solutions are suggested for these. This book hence addresses chemists, materials scientists, and engineers, working with nanoceramic materials and on their applications.
Download or read book Thermal Processing and the Evolution of Composition Structure and Properties for Sol gel Derived PZT Thin Layers written by Charles David Edward Lakeman and published by . This book was released on 1994 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. - Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications - Examines properties of different ceramic nanocomposites, as well as failure mechanisms - Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field
Download or read book Handbook of sol gel science and technology 1 Sol gel processing written by Sumio Sakka and published by Springer Science & Business Media. This book was released on 2005 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Dr. Disiich of Germany prepared a glass lens by the sol-gel method around 1970, sol-gel science and technology has continued to develop. Since then this field has seen remarkable technical developments as well as a broadening of the applications of sol-gel science and technology. There is a growing need for a comprehensive reference that treats both the fundamentals and the applications, and this is the aim of "Handbook of Sol-Gel Science and Technology."The primary purpose of sol-gel science and technology is to produce materials, active and non-active including optical, electronic, chemical, sensor, bio- and structural materials. This means that sol-gel science and technology is related to all kinds of manufacturing industries. Thus Volume 1, "Sol-Gel Processing," is devoted to general aspects of processing. Newly developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, photocatalysts will be covered. Topics in this volume include: Volume 2, "Characterization of Sol-Gel Materials and Products, "highlights the important fact that useful materials are only produced when characterization is tied to processing. Furthermore, characterization is essential to the understanding of nanostructured materials, and sol-gel technology is a most important technology in this new field. Since nanomaterials display their functional property based on their nano- and micro-structure, "characterization" is very important. Topics found in Volume 2 include: Sol-gel technology is a versatile technology, making it possible to produce a wide variety of materials and to provide existing substances with novel properties. This technology was applied to producingnovel materials, for example organic-inorganic hybrids, which are quite difficult to make by other fabricating techniques, and it was also applied to producing materials based on high temperature superconducting oxides. "Applications of Sol-Gel Technology," (Volume 3), will cover applications such as:
Download or read book Synthesis of Zinc Oxide by Sol Gel Method for Photoelectrochemical Cells written by Siti Salwa Alias and published by Springer Science & Business Media. This book was released on 2013-11-20 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the study of synthesized ZnO powder using Zn(CH3COO)2∙2H2O precursor, methanol (as solvent), and sodium hydroxide (NaOH) to vary the pH. The successfully synthesized ZnO powder from the sol-gel centrifugation and sol-gel storage methods were characterized and investigated by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, UV–visible spectroscopy, and photoluminescence test to compare the properties of the nanoparticles. The best characteristic of the ZnO powder from both methods was observed when the powders were coated on an ITO glass to fabricate a PEC. The current density–voltage performances of both PECs were investigated under luminescent and dark conditions.
