Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Physics Of Creep And Creep Resistant Alloys written by F R N Nabarro and published by CRC Press. This book was released on 2018-05-08 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique in its approach, this introduction to the physics of creep concentrates on the physical principles underlying observed phenomena. As such it provides a resource for graduate students in materials science, metallurgy, mechanical engineering, physics and chemistry as well as researchers in other fields. Following a brief mathematical treatment, the authors introduce creep phenomena together with some empirical laws and observations. The mechanisms of creep and diffusion under varying experimental conditions are subsequently analysed and developed. The second half of the text considers alloying in greater detail as well as exploring the structure and properties of superalloys and stress effects in these materials.

Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.

Download or read book Fundamentals of Creep and Creep rupture in Metals written by Frank Garofalo and published by . This book was released on 1965 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep in Ceramics written by Joshua Pelleg and published by Springer. This book was released on 2017-03-28 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on Creep in Ceramics. The book consists of two parts. In part A general knowledge of creep in ceramics is considered, while part B specifies creep in technologically important ceramics, namely creep in oxide ceramics, carnides and nitrides. While covering all relevant information regarding raw materials and characterization of creep in ceramics, the book also summarizes most recent innovations and developments in this field as a result of extensive literature search.

Download or read book Fatigue and Durability of Metals at High Temperatures written by S. S. Manson and published by ASM International. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.

Download or read book Creep and Fracture in High Temperature Components written by European Creep Collaborative Committee and published by DEStech Publications, Inc. This book was released on 2005 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information from around the world on creep in multiple high-temperature metals, alloys, and advanced materials.

Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors

Download or read book Encyclopedia of Continuum Mechanics written by Holm Altenbach and published by Springer. This book was released on 2020-01-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia covers the entire science of continuum mechanics including the mechanics of materials and fluids. The encyclopedia comprises mathematical definitions for continuum mechanical modeling, fundamental physical concepts, mechanical modeling methodology, numerical approaches and many fundamental applications. The modelling and analytical techniques are powerful tools in mechanical civil and areospsace engineering, plus in related fields of plasticity, viscoelasticity and rheology. Tensor-based and reference-frame-independent, continuum mechanics has recently found applications in geophysics and materials.

Download or read book Creep of Crystals written by Jean-Paul Poirier and published by Cambridge University Press. This book was released on 1985-02-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the physics of the plastic deformation of solids at high temperatures. It is directed at geologists or geophysicists interested in the high-temperature behaviour of crystals who wish to become acquainted with the methods of materials science in so far as they are useful to earth scientists. It explains the most important models and recent experimental results without losing the reader in the primary literature of materials science. In turn the book deals with the essential solid-state physics; thermodynamics and hydrostatics of creep; creep models and their applications in the geological sciences; diffusion creep; superplastic deformation and deformation enhanced by phase transformations. Five concluding chapters give experimental results for metals, ceramics and minerals. There are extensive bibliographies to aid further study.

Download or read book Unified Constitutive Laws of Plastic Deformation written by A. S. Krausz and published by Elsevier. This book was released on 1996-05-31 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-technology industries using plastic deformation demand soundly-based economical decisions in manufacturing design and product testing, and the unified constitutive laws of plastic deformation give researchers aguideline to use in making these decisions. This book provides extensive guidance in low cost manufacturing without the loss of product quality. Each highly detailed chapter of Unified Constitutive Laws of Plastic Deformation focuses on a distinct set of defining equations. Topics covered include anisotropic and viscoplastic flow, and the overall kinetics and thermodynamics of deformation. This important book deals with a prime topic in materials science and engineering, and will be of great use toboth researchers and graduate students. - Describes the theory and applications of the constitutive law of plastic deformation for materials testing - Examines the constitutive law of plastic deformation as it applies to process and product design - Includes a program on disk for the determination and development of the constitutive law of plastic deformation - Considers economical design and testing methods

Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 1999-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.

Download or read book Nanotechnology in Eco Efficient Construction written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2013-04-04 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the environmental impact of existing construction and building materials comes under increasing scrutiny, the search for more eco-efficient solutions has intensified. Nanotechnology offers great potential in this area and is already being widely used to great success. Nanotechnology in eco-efficient construction is an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction.Following an introduction to the use of nanotechnology in eco-efficient construction materials, part one considers such infrastructural applications as nanoengineered cement-based materials, nanoparticles for high-performance and self-sensing concrete, and the use of nanotechnology to improve the bulk and surface properties of steel for structural applications. Nanoclay-modified asphalt mixtures and safety issues relating to nanomaterials for construction applications are also reviewed before part two goes on to discuss applications for building energy efficiency. Topics explored include thin films and nanostructured coatings, switchable glazing technology and third generation photovoltaic (PV) cells, high-performance thermal insulation materials, and silica nanogel for energy-efficient windows. Finally, photocatalytic applications are the focus of part three, which investigates nanoparticles for pollution control, self-cleaning and photosterilisation, and the role of nanotechnology in manufacturing paints and purifying water for eco-efficient buildings.Nanotechnology in eco-efficient construction is a technical guide for all those involved in the design, production and application of eco-efficient construction materials, including civil engineers, materials scientists, researchers and architects within any field of nanotechnology, eco-efficient materials or the construction industry. - Provides an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction - Examines the use of nanotechnology in eco-efficient construction materials - Considers a range of important infrastructural applications, before discussing applications for building energy efficiency

Download or read book Multiscale Phenomena in Plasticity From Experiments to Phenomenology Modelling and Materials Engineering written by Joël Lépinoux and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A profusion of research and results on the mechanical behaviour of crystalline solids has followed the discovery of dislocations in the early thirties. This trend has been enhanced by the development of powerful experimental techniques. particularly X ray diffraction. transmission and scanning electron microscopy. microanalysis. The technological advancement has given rise to the study of various and complex materials. not to speak of those recently invented. whose mechanical properties need to be mastered. either for their lise as structural materials. or more simply for detenllining their fonnability processes. As is often the case this fast growth has been diverted both by the burial of early fundamental results which are rediscovered more or less accurately. and by the too fast publication of inaccurate results. which propagate widely. and are accepted without criticism. Examples of these statements abound. and will not be quoted here for the sake of dispassionateness. Understanding the mechanical properties of materials implies the use of various experimental techniques. combined with a good theoretical knowledge of elasticity. thermodynamics and solid state physics. The recent development of various computer techniques (simulation. ab initio calculations) has added to the difficulty of gathering the experimental information. and mastering the theoretical understanding. No laboratory is equipped with all the possible experimental settings. almost no scientist masters all this theoretical kno\vledge. Therefore. cooperation between scientists is needed more than even before.

Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.

Download or read book Creep of Metals and Alloys written by R. W. Evans and published by Maney Pub. This book was released on 1985-01-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text has been prepared by the leaders of a research group which, over several decades, has established a reputation for reliable experimentation and the presentation of controversial and stimulating ideas. This manuscript is no exception, beginning with a balanced introductory coverage of the subject at undergraduate level and ending with a challenging alternative to traditional theoretical and practical approaches to creep and creep fracture.

Download or read book Viscoelastic Materials written by Roderic S. Lakes and published by Cambridge University Press. This book was released on 2009-04-27 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text on viscoelastic materials addresses design applications as diverse as earplugs, computer disks and medical diagnostics.