Download or read book Technologies for the Transition Volume 3 written by and published by . This book was released on 1981 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineering Technologies and Applications Volume 3 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-12-28 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 3 includes the following topics: Numerical simulations of three-dimensional laminar mixed convection heat transfer of water-based-Al2O3 nanofluid in an open cubic cavity with a heated block. Nonlinear formulations of Element-Free Galerkin Method (EFGM) for large deformation analysis of Ogden’s hyperelastic materials, emphasizing incompressibility and mesh distortion avoidance. Development of a 3D numerical model with LS-DYNA using a coupled SPH-FEM method to simulate hydraulic behavior of a Ski-Jump Spillway with dentates, showcasing precision through validation. Exploration of enhancing the inlet system of an LPG-H2 fueled engine using a static inclined blade turbine, analyzed through Computational Fluid Dynamics (CFD) simulations. Effective utilization of Artificial Neural Networks (ANN) in heat transfer applications, addressing issues like fouling in heat exchangers, showcasing their accuracy compared to experimental data. Investigation of the impact of nitrogen concentration on the structure and properties of ZrN coatings deposited by magnetron sputtering, evaluating variations in structural and mechanical properties. Forced convection in a horizontal cylindrical pipe with pseudoplastic fluid, considering uniform constant heat flux and uniform temperature as boundary conditions. Modeling and experimental study of a water solar collector coupled to an optimized solar still, aiming to enhance freshwater production in a solar distillation system under specific climatic conditions. Exploration of the effect of film thickness on the structure and properties of Ti-N films deposited by magnetron sputtering, utilizing theoretical and experimental analysis to confirm the rock salt TiN structure. The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology. Readership Graduate students, PhD candidates and professionals seeking basic and applied information related to mechanical engineering and technology.
Download or read book Modern Drying Technology Volume 3 written by Evangelos Tsotsas and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume series provides a comprehensive overview of all important aspects of modern drying technology, concentrating on the transfer of cutting-edge research results to industrial use. Volume 3 discusses how desired properties of foods, biomaterials, active pharmaceutical ingredients, and fragile aerogels can be preserved during drying, and how spray drying and spray fluidized bed processes can be used for particle formation and formulation. Methods for monitoring product quality, such as process analytical technology, and modeling tools, such as Monte Carlo simulations, discrete particle modeling and neural networks, are presented with real examples from industry and academia.
Download or read book Transition and Survival Technologies Interdimensional Consciousness as Healing Survival and Beyond written by and published by Light Technology Publishing. This book was released on 2008-04-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take a new look at healing, health, life, even death, and daily challenges and transitions. Transition and Survival Technologies takes readers further on their inner as well as inter-dimensional journeys into the worlds of healing, transitioning, shifting realities, dying ?????? into the worlds the human consciousness has a right to access and can indeed access to heal and survive here and beyond. We can free our attention to focus upon something much more subtle, abstract, and more real than our so-called "worldly" experiences. Once we are fully liberated and our perceptions set free to see, a new kind of understanding or vision of reality can come to us. We can then see ourselves as something far more, far greater, than we believed ourselves to be.
Download or read book Technological Learning in the Transition to a Low Carbon Energy System written by Martin Junginger and published by Academic Press. This book was released on 2019-11-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological Learning in the Transition to a Low-Carbon Energy System: Conceptual Issues, Empirical Findings, and Use in Energy Modeling quantifies key trends and drivers of energy technologies deployed in the energy transition. It uses the experience curve tool to show how future cost reductions and cumulative deployment of these technologies may shape the future mix of the electricity, heat and transport sectors. The book explores experience curves in detail, including possible pitfalls, and demonstrates how to quantify the 'quality' of experience curves. It discusses how this tool is implemented in models and addresses methodological challenges and solutions. For each technology, current market trends, past cost reductions and underlying drivers, available experience curves, and future prospects are considered. Electricity, heat and transport sector models are explored in-depth to show how the future deployment of these technologies--and their associated costs--determine whether ambitious decarbonization climate targets can be reached - and at what costs. The book also addresses lessons and recommendations for policymakers, industry and academics, including key technologies requiring further policy support, and what scientific knowledge gaps remain for future research. Provides a comprehensive overview of trends and drivers for major energy technologies expected to play a role in the energy transition Delivers data on cost trends, helping readers gain insights on how competitive energy technologies may become, and why Reviews the use of learning curves in environmental impacts for lifecycle assessments and energy modeling Features social learning for cost modeling and technology diffusion, including where consumer preferences play a major role
Download or read book The Geopolitics of the Global Energy Transition written by Manfred Hafner and published by Springer Nature. This book was released on 2020-06-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is currently undergoing an historic energy transition, driven by increasingly stringent decarbonisation policies and rapid advances in low-carbon technologies. The large-scale shift to low-carbon energy is disrupting the global energy system, impacting whole economies, and changing the political dynamics within and between countries. This open access book, written by leading energy scholars, examines the economic and geopolitical implications of the global energy transition, from both regional and thematic perspectives. The first part of the book addresses the geopolitical implications in the world’s main energy-producing and energy-consuming regions, while the second presents in-depth case studies on selected issues, ranging from the geopolitics of renewable energy, to the mineral foundations of the global energy transformation, to governance issues in connection with the changing global energy order. Given its scope, the book will appeal to researchers in energy, climate change and international relations, as well as to professionals working in the energy industry.
Download or read book Ceramics Science and Technology Volume 3 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2011-12-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book The Material Basis of Energy Transitions written by Alena Bleicher and published by Academic Press. This book was released on 2020-08-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Material Basis of Energy Transitions explores the intersection between critical raw material provision and the energy system. Chapters draw on examples and case studies involving energy technologies (e.g., electric power, transport) and raw material provision (e.g., mining, recycling), and consider these in their regional and global contexts. The book critically discusses issues such as the notion of criticality in the context of a circular economy, approaches for estimating the need for raw materials, certification schemes for raw materials, the role of consumers, and the impact of renewable energy development on resource conflicts. Each chapter deals with a specific issue that characterizes the interdependency between critical raw materials and renewable energies by examining case studies from a particular conceptual perspective. The book is a resource for students and researchers from the social sciences, natural sciences, and engineering, as well as interdisciplinary scholars interested in the field of renewable energies, the circular economy, recycling, transport, and mining. The book is also of interest to policymakers in the fields of renewable energy, recycling, and mining, professionals from the energy and resource industries, as well as energy experts and consultants looking for an interdisciplinary assessment of critical materials. Provides a comprehensive overview of key issues related to the nexus between renewable energy and critical raw materials Explores interdisciplinary perspectives from the natural sciences, engineering, and social sciences Discusses critical strategies to address the nexus from a practitioner's perspective
Download or read book Technology in Transition A D 300 650 written by Luke Lavan and published by BRILL. This book was released on 2008-03-31 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first general work to be published on technology in Late Antiquity. It seeks to survey aspects of the technology of the period and to respond to questions about technological continuity, stagnation and decline. The book opens with a comprehensive bibliographic essay that provides an overview of relevant literature. The main section then explores technologies in agriculture, production (metal, ceramics and glass), engineering and building. Papers draw on both archaeological and textual sources, and on analogies with medieval and early modern technologies. Reference is made not only to the periods which preceded it, but to the transition to the Early Middle Ages and to the technological heritage of Late Antiquity to the Islamic world. Several papers focus on Italy, whilst others consider North Africa, Asia Minor, and the Near-East.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1978 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reviews of Accelerator Science and Technology Volume 3 written by Alex Chao and published by World Scientific. This book was released on 2010 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each generation yielded growths in brightness and time resolution that were unimaginable just a few years earlier. In particular, the progression from the 3rd to 4th generation is a true revolution; the peak brilliance of coherent soft and hard x-rays has increased by 7-10 orders of magnitude, and the image resolution has reached the angstrom (1 [symbol] = 10-10 meters) and femto-second (1 fs = 10-15 second) scales. These impressive capabilities have fostered fundamental scientific advances and led to an explosion of numerous possibilities in many important research areas including material science, chemistry, molecular biology and the life sciences. Even more remarkably, this field of photon source invention and development shows no signs of slowing down. Studies have already been started on the next generation of x-ray sources, which would have a time resolution in the atto-second (1 as = 10-18 second) regime, comparable to the time of electron motion inside atoms.
Download or read book The Gentle Way written by Tom T. Moore and published by Light Technology Publishing. This book was released on 2006 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Angelic power tools are interdimensional windows that flood your psychic centers with angelic energy. They are treasured by lightworkers around the world. Find out why. It takes only a short time to assemble your power tools using the patterns in this book and a few inexpensive supplies found in any stained glass shop. When you are finished you will have ten authentic, versatile angelic instruments for healing, channeling, and self-transformation. You get ten superb power tools channeled from the Rose Angels: The Inner Eye Disk is for channeling, decision-making, meditation, dreaming, and visions. Everyone should have this disk. The Rainbow Disk energizes both the physical and astral bodies and brings floods of high-frequency energy into a healer's hands. The Light Weaver Disk quickly and easily patches auric holes that leak life force. The Grounding Disk keeps you from getting hazy during psychic work as it anchors astral information down into the physical plane. The Magnet Disk pu
Download or read book Endings Are Beginnings written by and published by Light Technology Publishing. This book was released on 2008-04-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take a journey into the infinite realm of hope and possibility, of transformation and transcendence. Discover what must shift for our minds to open to heightened awareness and powers and what keeps us from knowing all we can about who we are and what we are able to do ?????? in and beyond our physical existence. Step into the continuity of life and walk on ?????? because, after all: The Life force does not die. Gain a new perspective on healing trauma, illness, and addictions, and a more positive way of looking at daily challenges and transitions. Take a journey of the heart, mind and soul into the infinite realm of hope and possibility, of transformation and transcendence, and heightened awareness. Experience and explore different, more effective ways to effect positive transitions through and beyond daily life challenges, troubled relationship patterns, addictions, physical illness, as well as physical death.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1971 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer and Computing Technologies in Agriculture II Volume 3 written by Daoliang Li and published by Springer Science & Business Media. This book was released on 2009-05-29 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume comprise the refereed proceedings of the Second IFIP International Conference on Computer and Computing Technologies in Agriculture (CCTA2008), in Beijing, China, 2008. The conference on the Second IFIP International Conference on Computer and Computing Technologies in Agriculture (CCTA 2008) is cooperatively sponsored and organized by the China Agricultural University (CAU), the National Engineering Research Center for Information Technology in Agriculture (NERCITA), the Chinese Society of Agricultural Engineering (CSAE) , International Federation for Information Processing (IFIP), Beijing Society for Information Technology in Agriculture, China and Beijing Research Center for Agro-products Test and Farmland Inspection, China. The related departments of China’s central government bodies like: Ministry of Science and Technology, Ministry of Industry and Information Technology, Ministry of Education and the Beijing Municipal Natural Science Foundation, Beijing Academy of Agricultural and Forestry Sciences, etc. have greatly contributed and supported to this event. The conference is as good platform to bring together scientists and researchers, agronomists and information engineers, extension servers and entrepreneurs from a range of disciplines concerned with impact of Information technology for sustainable agriculture and rural development. The representatives of all the supporting organizations, a group of invited speakers, experts and researchers from more than 15 countries, such as: the Netherlands, Spain, Portugal, Mexico, Germany, Greece, Australia, Estonia, Japan, Korea, India, Iran, Nigeria, Brazil, China, etc.
Download or read book Hydrogen Energy written by Paul Ekins and published by Routledge. This book was released on 2010-08-12 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen could be a significant fuel of the future, with the potential to make a major contribution to the resolution of pressing social and environmental problems such as carbon emissions, energy security and local air pollution. This book, based on four years of detailed research, subjects the promise and potential of hydrogen to searching, in-depth socio-economic analysis. It discusses the different technologies for the production, distribution, storage and use of hydrogen, and analyses the economics of these technologies and their current market prospects. It also describes various experiences with aspects of a hydrogen economy in two parts of the world - the UK and Canada - and then assesses the nature of different hydrogen futures that might develop depending on how the technology, economics, social acceptance and policy frameworks play out in different contexts. The book ends by setting out the policy drivers and levers which could stimulate a virtuous circle of research and development, innovation and investment that might ultimately generate a sustainable hydrogen economy. This is essential reading for economists, engineers, business leaders, investors, policy makers, researchers and students who are interested in the future of the energy system and the part that hydrogen might play in it.
Download or read book Innovations and Techno ecological Transition written by Fabienne Picard and published by John Wiley & Sons. This book was released on 2016-10-14 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present a systemic perspective to energetic transition to a discarbonated society implying an increase of energetic efficiency of current production process, new way of energy production - integration of renewable energies, re-use of wastes. Main societal functions are analyzed in order to highlight the ongoing process of technological and non-technological innovations: transport and mobility, food, building. The purpose of this book is to analyze from a global perspective the energetic innovative system on building and to understand the limits of its development and potential new actions.
