Download or read book Technologies for Printed Sensors and Electronics written by Ravinder Dahiya and published by Wiley-IEEE Press. This book was released on 2023-12-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of printed electronics technologies In Technologies for Printed Sensors and Electronics, an expert team of engineers delivers a comprehensive survey of a variety of contact and non-contact printed electronics manufacturing technologies, as well as their applications. The book brings together printing techniques and offers detailed discussions of their potential capabilities and the critical limitations of each technology. The authors also describe how those limitations might be solved and alternatives that might be explored in the future. Technologies for Printed Sensors and Electronics describes the potential development of a common platform, assuming that the limitations of a single method might be overcome by the advantages of the others. It also evaluates printed electronics on the basis of the electrical characteristics of the resulting devices or sensors, the materials they're made of, and their anticipated applications. The book also includes: A thorough introduction to the history of printed electronics, including push and pull factors influencing the rise of printed electronics and the repurposing of traditional printing techniques for printed electronics Comprehensive explorations of functional materials used in printable electronic materials, including their classification and discussions of organic and inorganic materials In-depth examinations of substrates and packaging materials and their physical and chemical behavior, as well as discussions of use constraints in different applications Perfect for senior undergraduate and graduate students in electrical and electronics engineering, material science, 3D printing, physics, and chemistry, Technologies for Printed Sensors and Electronics will also earn a place in the libraries of researchers, practitioners, and students working in or studying biomedical engineering.
Download or read book Printed and Flexible Sensor Technology written by N. A. G. MUKHOPADHYAY and published by . This book was released on 2021-07-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Printed Electronics written by Katsuaki Suganuma and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.
Download or read book Hybrid Nanomaterials written by Rafael Vargas-Bernal and published by BoD – Books on Demand. This book was released on 2020-06-10 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the hottest research topics today are hybrid nanomaterials and flexible electronics. As such, this book covers both topics with chapters written by experts from across the globe. Chapters address hybrid nanomaterials, electronic transport in black phosphorus, three-dimensional nanocarbon hybrids, hybrid ion exchangers, pressure-sensitive adhesives for flexible electronics, simulation and modeling of transistors, smart manufacturing technologies, and inorganic semiconductors.
Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.
Download or read book Printed Flexible Sensors written by Anindya Nag and published by Springer. This book was released on 2019-03-11 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the design, fabrication and implementation of flexible printed sensors. It explores a range of materials for developing the electrode and substrate parts of the sensors, on the basis of their electrical and mechanical characteristics. The sensors were processed using laser cutting and 3D printing techniques, and the sensors developed were employed in a number of healthcare, environmental and industrial applications, including: monitoring of physiological movements, respiration, salinity and nitrate measurement, and tactile sensing. The type of sensor selected for each application depended on its dimensions, robustness and sensitivity. The sensors fabricated were also embedded in an IoT-based system, allowing them to be integrated into real-time applications.
Download or read book Functional Nanostructures and Sensors for CBRN Defence and Environmental Safety and Security written by Anatolie Sidorenko and published by Springer Nature. This book was released on 2020-03-17 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, techniques for materials preparation and processing at nanometer scale have advanced rapidly, leading to the introduction of novel principles for a new generation of sensors and detectors. At the same time, the chemical industry, transport and agriculture produce huge amounts of dangerous waste gases and liquids, leading to soil, air and water contamination. One more modern threat - international terrorism - demands that scientists make efforts to apply new principles and technologies to protect society against chemical, biological, radiological and nuclear (CBRN) attacks and to develop novel effective technologies for the remediation of large contaminated areas. Accordingly, the main goal of this book is to bring together experts (theorists, experimentalists, engineers and technologists) for an extensive discussion covering: novel principles for functional nanostructures and detector fabrication and implementation, the development of novel technologies for the deactivation of CBRN agents, their experimental realization and their application in novel monitoring and control systems, and technological processes for soil and water remediation, with a view to environmental protection and defence against CBRN-based terrorism. In keeping with the book’s main goal, the following topics are highlighted and discussed: - Sensors and detectors - detection of chemicals, principles of “artificial nose” and chemical “micro-lab on a chip” design, surface and underground water quality monitoring systems, molecular electronics, superconducting electronic devices, quantum detectors and Qubits. - Environmental protection and CBRN - detection of infrared, microwave, X-ray and terahertz radiation. Principles for novel IR-, UV-, and Terahertz-wave devices for the detection of low-contrast objects. - Novel technological processes for CBRN destruction and deactivation. All these topics are strongly interrelated, both with regard to fundamental aspects and to fabrication and implementation technologies; in addition, they are highly promising for application in novel functional devices, computer logics, sensing and detection of low-concentration chemicals, weak and extremely weak magnetic and microwave fields, infrared and ultraviolet radiation. Given its scope, the book will be a useful and interesting guide for a broad readership of engineers, scientists, PhD students and experts in the area of defence against environmental terrorism.
Download or read book Organic and Printed Electronics written by Giovanni Nisato and published by CRC Press. This book was released on 2024-05-24 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic and printed electronics (OPE) is well established in terms of academic, scientific, and technological research. The mass applications, ranging from displays to printed sensors to photovoltaics, are growing and becoming all the more relevant today. This book provides a comprehensive introduction to organic flexible and printed electronics, their fundamental aspects, core technologies, and applications and is authored by international expert practitioners in the field. The book is a key reference resource specially designed to address students in their final undergraduate or beginning graduate studies as well as engineers interested in approaching this field from an application perspective. In this second edition of the book, almost all chapters have been revised and updated. Among others, the second edition includes new chapters on smart textiles and on photovoltaics. The chapter on characterization techniques has been expanded and includes new references to standards. The contents on circular economy, innovation management, and roadmapping chapters have been largely augmented and updated. Finally, the chapter on hands-on experiments includes new set-ups on dye solar cells and supercapacitors.
Download or read book Flexible and Wearable Electronics for Smart Clothing written by Gang Wang and published by John Wiley & Sons. This book was released on 2020-02-24 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the state-of-the-art on wearable technology for smart clothing The book gives a coherent overview of recent development on flexible electronics for smart clothing with emphasis on wearability and durability of the materials and devices. It offers detailed information on the basic functional components of the flexible and wearable electronics including sensing, systems-on-a-chip, interacting, and energy, as well as the integrating and connecting of electronics into textile form. It also provides insights into the compatibility and integration of functional materials, electronics, and the clothing technology. Flexible and Wearable Electronics for Smart Clothing offers comprehensive coverage of the technology in four parts. The first part discusses wearable organic nano-sensors, stimuli-responsive electronic skins, and flexible thermoelectrics and thermoelectric textiles. The next part examines textile triboelectric nanogenerators for energy harvesting, flexible and wearable solar cells and supercapacitors, and flexible and wearable lithium-ion batteries. Thermal and humid management for next-generation textiles, functionalization of fiber materials for washable smart wearable textiles, and flexible microfluidics for wearable electronics are covered in the next section. The last part introduces readers to piezoelectric materials and devices based flexible bio-integrated electronics, printed electronics for smart clothes, and the materials and processes for stretchable and wearable e-textile devices. -Presents the most recent developments in wearable technology such as wearable nanosensors, logic circuit, artificial intelligence, energy harvesting, and wireless communication -Covers the flexible and wearable electronics as essential functional components for smart clothing from sensing, systems-on-a-chip, interacting, energy to the integrating and connecting of electronics -Of high interest to a large and interdisciplinary target group, including materials scientists, textile chemists, and electronic engineers in academia and industry Flexible and Wearable Electronics for Smart Clothing will appeal to materials scientists, textile industry professionals, textile engineers, electronics engineers, and sensor developers.
Download or read book Applications of Organic and Printed Electronics written by Eugenio Cantatore and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on various "substrate independent, large throughput" technologies: techniques that are able to build electronics on cheap, low cost, flexible and temperature sensitive substrates, like PEN or other plastic foils, and using inexpensive and large throughput methods like printing. Most of these technologies, in fact, have the potential to enable the revolutionary applications that will be discussed in the book. The book therefore goes beyond "organic" technologies, i.e. technologies that use functional organic materials (namely semiconductors), to explore a broader and even more interesting area of research. The book presents a comprehensive landscape of the new applications enabled by substrate independent, high throughput electronic technologies and their business potential. It explains the link between innovation in technology and in products. It also provides the reader with a clear understanding of the technology and the research challenges in the field. The book is divided in two parts. The first is devoted to applications where the most important selling point is large area. To this domain belong roll-up, flexible and emissive displays based on organic devices (used in backplanes or as display medium), unobtrusive electronics enabling ambient intelligence applications, and the increasingly important photovoltaic applications. The second part is devoted to applications where cost reduction is the main factor. RFIDs, smart labels, organic sensors and printed sensor system belong to this domain. A chapter is devoted to each different application. Each chapter is originally developed for the book by (a group of) world-wide recognized experts in the specific field of application.
Download or read book Printed Electronics written by Zheng Cui and published by John Wiley & Sons. This book was released on 2016-09-26 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the newly emerged and highly interdisciplinary field of printed electronics • Provides an overview of the latest developments and research results in the field of printed electronics • Topics addressed include: organic printable electronic materials, inorganic printable electronic materials, printing processes and equipments for electronic manufacturing, printable transistors, printable photovoltaic devices, printable lighting and display, encapsulation and packaging of printed electronic devices, and applications of printed electronics • Discusses the principles of the above topics, with support of examples and graphic illustrations • Serves both as an advanced introductory to the topic and as an aid for professional development into the new field • Includes end of chapter references and links to further reading
Download or read book Organic and Printed Electronics written by Giovanni Nisato and published by CRC Press. This book was released on 2016-04-27 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic and printed electronics is well established in terms of academic, scientific, and technological research but is still an emerging one in terms of mass industrial applications such as OLED displays and lighting and organic photovoltaics. This book provides a comprehensive introduction to organic and printed electronics, their fu
Download or read book Robotic Tactile Sensing written by Ravinder S. Dahiya and published by Springer Science & Business Media. This book was released on 2012-07-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future robots are expected to work closely and interact safely with real-world objects and humans alike. Sense of touch is important in this context, as it helps estimate properties such as shape, texture, hardness, material type and many more; provides action related information, such as slip detection; and helps carrying out actions such as rolling an object between fingers without dropping it. This book presents an in-depth description of the solutions available for gathering tactile data, obtaining aforementioned tactile information from the data and effectively using the same in various robotic tasks. The efforts during last four decades or so have yielded a wide spectrum of tactile sensing technologies and engineered solutions for both intrinsic and extrinsic touch sensors. Nowadays, new materials and structures are being explored for obtaining robotic skin with physical features like bendable, conformable, and stretchable. Such features are important for covering various body parts of robots or 3D surfaces. Nonetheless, there exist many more hardware, software and application related issues that must be considered to make tactile sensing an effective component of future robotic platforms. This book presents an in-depth analysis of various system related issues and presents the trade-offs one may face while developing an effective tactile sensing system. For this purpose, human touch sensing has also been explored. The design hints coming out of the investigations into human sense of touch can be useful in improving the effectiveness of tactile sensory modality in robotics and other machines. Better integration of tactile sensors on a robot’s body is prerequisite for the effective utilization of tactile data. The concept of semiconductor devices based sensors is an interesting one, as it allows compact and fast tactile sensing systems with capabilities such as human-like spatio-temporal resolution. This book presents a comprehensive description of semiconductor devices based tactile sensing. In particular, novel Piezo Oxide Semiconductor Field Effect Transistor (POSFET) based approach for high resolution tactile sensing has been discussed in detail. Finally, the extension of semiconductors devices based sensors concept to large and flexile areas has been discussed for obtaining robotic or electronic skin. With its multidisciplinary scope, this book is suitable for graduate students and researchers coming from diverse areas such robotics (bio-robots, humanoids, rehabilitation etc.), applied materials, humans touch sensing, electronics, microsystems, and instrumentation. To better explain the concepts the text is supported by large number of figures.
Download or read book Printed Organic and Molecular Electronics written by Daniel R. Gamota and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed Organic And Molecular Electronics was compiled to create a reference that included existing knowledge from the most renowned industry, academic, and government experts in the fields of organic semiconductor technology, graphic arts printing, micro-contact printing, and molecular electronics. It is divided into sections that consist of the most critical topics required for one to develop a strong understanding of the states of these technologies and the paths for taking them from R&D to the hands of consumers on a massive scale. As such, the book provides both theory as well as technology development results and trends.
Download or read book Inkjet Technology for Digital Fabrication written by Ian M. Hutchings and published by John Wiley & Sons. This book was released on 2012-11-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst inkjet technology is well-established on home and small office desktops and is now having increasing impact in commercial printing, it can also be used to deposit materials other than ink as individual droplets at a microscopic scale. This allows metals, ceramics, polymers and biological materials (including living cells) to be patterned on to substrates under precise digital control. This approach offers huge potential advantages for manufacturing, since inkjet methods can be used to generate structures and functions which cannot be attained in other ways. Beginning with an overview of the fundamentals, this bookcovers the key components, for example piezoelectric print-heads and fluids for inkjet printing, and the processes involved. It goes on to describe specific applications, e.g. MEMS, printed circuits, active and passive electronics, biopolymers and living cells, and additive manufacturing. Detailed case studies are included on flat-panel OLED displays, RFID (radio-frequency identification) manufacturing and tissue engineering, while a comprehensive examination of the current technologies and future directions of inkjet technology completes the coverage. With contributions from both academic researchers and leading names in the industry, Inkjet Technology for Digital Fabrication is a comprehensive resource for technical development engineers, researchers and students in inkjet technology and system development, and will also appeal to researchers in chemistry, physics, engineering, materials science and electronics.
Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-04-02 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.
Download or read book Antenna and Sensor Technologies in Modern Medical Applications written by Yahya Rahmat-Samii and published by John Wiley & Sons. This book was released on 2021-02-25 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the theory and recent development in the medical use of antenna technology Antenna and Sensor Technologies in Modern Medical Applications offers a comprehensive review of the theoretical background, design, and the latest developments in the application of antenna technology. Written by two experts in the field, the book presents the most recent research in the burgeoning field of wireless medical telemetry and sensing that covers both wearable and implantable antenna and sensor technologies. The authors review the integrated devices that include various types of sensors wired within a wearable garment that can be paired with external devices. The text covers important developments in sensor-integrated clothing that are synonymous with athletic apparel with built-in electronics. Information on implantable devices is also covered. The book explores technologies that utilize both inductive coupling and far field propagation. These include minimally invasive microwave ablation antennas, wireless targeted drug delivery, and much more. This important book: Covers recent developments in wireless medical telemetry Reviews the theory and design of in vitro/in vivo testing Explores emerging technologies in 2D and 3D printing of antenna/sensor fabrication Includes a chapter with an annotated list of the most comprehensive and important references in the field Written for students of engineering and antenna and sensor engineers, Antenna and Sensor Technologies in Modern Medical Applications is an essential guide to understanding human body interaction with antennas and sensors.