Download or read book Technologies for Electrical Power Conversion Efficiency and Distribution Methods and Processes written by Antchev, Mihail and published by IGI Global. This book was released on 2009-12-31 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents an overall description of electrical energy conversion technologies and required power electronic converters"--Provided by publisher.

Download or read book Electric Power Conversion written by Marian Gaiceanu and published by BoD – Books on Demand. This book was released on 2019-05-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introductory chapter to this book is like traveling in a time machine into past, present, and future of electric power conversion. Archeological discoveries are being transformed into the discoveries of the future. The book is an incursion to electric power conversion through electromechanical power conversion, static power conversion, and applications in the field. Each of the above-mentioned sections analyzes the knowledge gained using the experimental results of valuable research projects. Novice readers will learn how energy is converted adequately and adapted to different consumers. Advanced readers will discover different kinds of modern solutions and tendencies in the field of electric power conversion.

Download or read book Power Electronics for Renewable Energy Systems Transportation and Industrial Applications written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2014-06-02 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiles current research into the analysis and design of power electronic converters for industrial applications and renewable energy systems, presenting modern and future applications of power electronics systems in the field of electrical vehicles With emphasis on the importance and long-term viability of Power Electronics for Renewable Energy this book brings together the state of the art knowledge and cutting-edge techniques in various stages of research. The topics included are not currently available for practicing professionals and aim to enable the reader to directly apply the knowledge gained to their designs. The book addresses the practical issues of current and future electric and plug-in hybrid electric vehicles (PHEVs), and focuses primarily on power electronics and motor drives based solutions for electric vehicle (EV) technologies. Propulsion system requirements and motor sizing for EVs is discussed, along with practical system sizing examples. Key EV battery technologies are explained as well as corresponding battery management issues. PHEV power system architectures and advanced power electronics intensive charging infrastructures for EVs and PHEVs are detailed. EV/PHEV interface with renewable energy is described, with practical examples. This book explores new topics for further research needed world-wide, and defines existing challenges, concerns, and selected problems that comply with international trends, standards, and programs for electric power conversion, distribution, and sustainable energy development. It will lead to the advancement of the current state-of-the art applications of power electronics for renewable energy, transportation, and industrial applications and will help add experience in the various industries and academia about the energy conversion technology and distributed energy sources. Combines state of the art global expertise to present the latest research on power electronics and its application in transportation, renewable energy and different industrial applications Offers an overview of existing technology and future trends, with discussion and analysis of different types of converters and control techniques (power converters, high performance power devices, power system, high performance control system and novel applications) Systematic explanation to provide researchers with enough background and understanding to go deeper in the topics covered in the book

Download or read book Emerging Power Converters for Renewable Energy and Electric Vehicles written by Md. Rabiul Islam and published by CRC Press. This book was released on 2021-05-30 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advancements of power electronic converters and their control techniques for grid integration of large-scale renewable energy sources and electrical vehicles. Major emphasis is on transformer-less direct grid integration, bidirectional power transfer, compensation of grid power quality issues, DC system protection and grounding, interaction in mixed AC/DC systems, AC and DC system stability, design of high-frequency high power density systems with advanced soft magnetic materials, modeling and simulation of mixed AC/DC systems, switching strategies for enhanced efficiency, and protection and reliability for sustainable grid integration. This book is an invaluable resource for professionals active in the field of renewable energy and power conversion. Md. Rabiul Islam received his PhD from the University of Technology Sydney (UTS), Australia. He was appointed as a Lecturer at Rajshahi University of Engineering & Technology (RUET) in 2005 and promoted to full-term Professor in 2017. In early 2018, he joined the School of Electrical, Computer, and Telecommunications Engineering, University of Wollongong, Australia. He is a Senior Member of IEEE. His research interests include the fields of power electronic converters, renewable energy technologies, power quality, electrical machines, electric vehicles, and smart grids. He has authored or coauthored more than 200 publications including 50 IEEE Transactions/IEEE Journal papers. He has been serving as an editor for IEEE Transactions on Energy Conversion and IEEE Power Engineering Letters, and associate editor for IEEE Access. Md. Rakibuzzaman Shah is a Senior Lecturer with the School of Engineering, Information Technology and Physical Science at Federation University Australia. He has worked and consulted with distribution network operators and transmission system operators on individual projects and has done collaborative work on a large number of projects (EPSRC project on multi-terminal HVDC, Scottish and Southern Energy multi-infeed HVDC) - primarily on the dynamic impact of integrating new technologies and power electronics into large systems. He is an active member of the IEEE and CIGRE. He has more than 70 international publications and has spoken at the leading power system conferences around the world. His research interests include future power grids (i.e., renewable energy integration, wide-area control), asynchronous grid connection through VSC-HVDC, application of data mining in power system, distribution system energy management, and low carbon energy systems. Mohd. Hasan Ali is currently an Associate Professor with the Electrical and Computer Engineering Department at the University of Memphis, USA, where he leads the Electric Power and Energy Systems (EPES) Laboratory. His research interests include advanced power systems, smart-grid and microgrid systems, renewable energy systems, and cybersecurity issues in modern power grids. Dr. Ali has more than 190 publications, including 2 books, 4 book chapters, 2 patents, 60 top ranked journal papers, 96 peer-reviewed international conference papers, and 20 national conference papers. He serves as the editor of the IEEE Transactions on Sustainable Energy and IET-Generation, Transmission and Distribution (GTD) journal. Dr. Ali is a Senior Member of the IEEE Power and Energy Society (PES). He is also the Chair of the PES of the IEEE Memphis Section.

Download or read book Power Converter of Electric Machines Renewable Energy Systems and Transportation written by Adolfo Dannier and published by MDPI. This book was released on 2021-09-02 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power converters and electric machines represent essential components in all fields of electrical engineering. In fact, we are heading towards a future where energy will be more and more electrical: electrical vehicles, electrical motors, renewables, storage systems are now widespread. The ongoing energy transition poses new challenges for interfacing and integrating different power systems. The constraints of space, weight, reliability, performance, and autonomy for the electric system have increased the attention of scientific research in order to find more and more appropriate technological solutions. In this context, power converters and electric machines assume a key role in enabling higher performance of electrical power conversion. Consequently, the design and control of power converters and electric machines shall be developed accordingly to the requirements of the specific application, thus leading to more specialized solutions, with the aim of enhancing the reliability, fault tolerance, and flexibility of the next generation power systems.

Download or read book New Technologies for Power System Operation and Analysis written by Huaiguang Jiang and published by Academic Press. This book was released on 2020-11-04 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Power System Operation and Analysis considers the very latest developments in renewable energy integration and system operation, including electricity markets and wide-area monitoring systems and forecasting. Helping readers quickly grasp the essential information needed to address renewable energy integration challenges, this new book looks at basic power system mathematical models, advanced renewable integration and system optimizations from transmission and distribution system sides. Sections cover wind, solar, gas and petroleum, making this a useful reference for all engineers interested in power system operation. Includes codes in MATLAB® and Python Provides a complete analysis of all new and relevant power system technologies Covers the impact on existing power system operations at the advanced level, with detailed technical insights

Download or read book Energy Conversion written by Ibrahim H. Al-Bahadly and published by BoD – Books on Demand. This book was released on 2019-01-16 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy conversion technology has always been a main focus for researchers in order to meet the increasing demand as well as securing a clean, consistent and reliable energy supply. The constantly rising fuel price is another good reason to develop alternative systems such as wind turbines, hydropower, photovoltaic systems and other renewable energy solutions. This book contains a collection of selected research works in the areas of electric energy generation, renewable energy sources, hybrid system, electromechanical energy conversion, electric machines, power electronic converters and inverters, energy storage, smart grid and traditional energy conversion systems. The book intends to provide academic and industry professionals working in the field of energy conversion and related applications with an update in energy conversion technology, particularly from the applied perspective.

Download or read book Electrical Power Systems Technology written by Dale R. Patrick and published by CRC Press. This book was released on 2022-06-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Power Systems Technology, Fourth Edition covers a wide range of technologies and systems used in the generation, distribution, control, conversion, and measurement of electrical power. This reference book provides a foundational overview presented in a basic, easy-to-understand manner. The content is organized in a logical pedagogical style using five basic power system components – Measurement, Generation, Distribution, Control, and Conversion. Each of these basic systems is broken down into sub-systems, equipment, and components that are explored in greater detail in each of the 18 chapters. Simplified mathematical concepts are described with practical applications to assist in fundamental understanding. Abundant illustrations (almost one per page) are used to add visual information to supplement technical knowledge development. The fourth edition has been edited to provide improved information and clarity, including many new illustrations. An additional chapter – Chapter 18 – Evolving Power System Technologies and Considerations – has been added to describe issues related to power system operation.

Download or read book Electricity Power Generation written by Digambar M. Tagare and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an analytical overview of established electric generation processes, along with the present status & improvements for meeting the strains of reconstruction. These old methods are hydro-electric, thermal & nuclear power production. The book covers climatic constraints; their affects and how they are shaping thermal production. The book also covers the main renewable energy sources, wind and PV cells and the hybrids arising out of these. It covers distributed generation which already has a large presence is now being joined by wind & PV energies. It covers their accommodation in the present system. It introduces energy stores for electricity; when they burst upon the scene in full strength are expected to revolutionize electricity production. In all the subjects covered, there are references to power marketing & how it is shaping production. There will also be a reference chapter on how the power market works.

Download or read book Microgrid Technologies written by C. Sharmeela and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrid technology is an emerging area, and it has numerous advantages over the conventional power grid. A microgrid is defined as Distributed Energy Resources (DER) and interconnected loads with clearly defined electrical boundaries that act as a single controllable entity concerning the grid. Microgrid technology enables the connection and disconnection of the system from the grid. That is, the microgrid can operate both in grid-connected and islanded modes of operation. Microgrid technologies are an important part of the evolving landscape of energy and power systems. Many aspects of microgrids are discussed in this volume, including, in the early chapters of the book, the various types of energy storage systems, power and energy management for microgrids, power electronics interface for AC & DC microgrids, battery management systems for microgrid applications, power system analysis for microgrids, and many others. The middle section of the book presents the power quality problems in microgrid systems and its mitigations, gives an overview of various power quality problems and its solutions, describes the PSO algorithm based UPQC controller for power quality enhancement, describes the power quality enhancement and grid support through a solar energy conversion system, presents the fuzzy logic-based power quality assessments, and covers various power quality indices. The final chapters in the book present the recent advancements in the microgrids, applications of Internet of Things (IoT) for microgrids, the application of artificial intelligent techniques, modeling of green energy smart meter for microgrids, communication networks for microgrids, and other aspects of microgrid technologies. Valuable as a learning tool for beginners in this area as well as a daily reference for engineers and scientists working in the area of microgrids, this is a must-have for any library.

Download or read book Analysis and Design of Power Converter Topologies for Application in Future More Electric Aircraft written by Amit Kumar Singh and published by Springer. This book was released on 2018-05-14 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis proposes new power converter topologies suitable for aircraft systems. It also proposes both AC-DC and DC-DC types of converters for different electrical loads to improve the performance these systems. To increase fuel efficiency and reduce environmental impacts, less efficient non-electrical aircraft systems are being replaced by electrical systems. However, more electrical systems requires more electrical power to be generated in the aircraft. The increased consumption of electrical power in both civil and military aircrafts has necessitated the use of more efficient electrical power conversion technologies. This book presents acomprehensive mathematical analysis and the design and digital simulation of the power converters. Subsequently it discusses the construction of the hardware prototypes of each converter and the experimental tests carried out to verify the benefits of the proposed solutions in comparison to the existing solutions.

Download or read book Energy Storage Systems and Power Conversion Electronics for E Transportation and Smart Grid written by Sergio Saponara and published by MDPI. This book was released on 2020-12-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint in book form of the Energies MDPI Journal Special Issue , entitled “Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid”. The Special Issue was managed by two Guest Editors from Italy and Norway: Professor Sergio Saponara from the University of Pisa and Professor Lucian MIHET-POPA from Østfold University College, in close cooperation with the Editors from Energies. The papers published in this SI are related to the emerging trends in energy storage and power conversion electronic circuits and systems, with a specific focus on transportation electrification, and on the evolution from the electric grid to a smart grid. An extensive exploitation of renewable energy sources is foreseen for the smart grid, as well as a close integration with the energy storage and recharging systems of the electrified transportation era. Innovations at the levels of both algorithmic and hardware (i.e., power converters, electric drives, electronic control units (ECU), energy storage modules and charging stations) are proposed. Research and technology transfer activities in energy storage systems, such as batteries and super/ultra-capacitors, are essential for the success of electric transportation, and to foster the use of renewable energy sources. Energy storage systems are the key technology to solve these issues, and to increase the adoption of renewable energy sources in the smart grid.

Download or read book Renewable Energy written by Tolga Taner and published by BoD – Books on Demand. This book was released on 2021-02 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses renewable energy resources and systems as well as energy efficiency. It contains twenty-three chapters over six sections that address a multitude of renewable energy types, including solar and photovoltaic, biomass, hydroelectric, and geothermal. The information presented herein is a scientific contribution to energy and environmental regulations, quality and efficiency of energy services, energy supply security, energy market-based approaches, government interventions, and the spread of technological innovation.

Download or read book Electric Renewable Energy Systems written by Muhammad H. Rashid and published by Academic Press. This book was released on 2015-11-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This derivative volume stemming from content included in our seminal Power Electronics Handbook takes its chapters related to renewables and establishes them at the core of a new volume dedicated to the increasingly pivotal and as yet under-published intersection of Power Electronics and Alternative Energy. While this re-versioning provides a corollary revenue stream to better leverage our core handbook asset, it does more than simply re-package existing content. Each chapter will be significantly updated and expanded by more than 50%, and all new introductory and summary chapters will be added to contextualize and tie the volume together. Therefore, unlike traditional derivative volumes, we will be able to offer new and updated material to the market and include this largely original content in our ScienceDirect Energy collection. Due to the inherently multi-disciplinary nature of renewables, many engineers come from backgrounds in Physics, Materials, or Chemical Engineering, and therefore do not have experience working in-depth with electronics. As more and more alternative and distributed energy systems require grid hook-ups and on-site storage, a working knowledge of batteries, inverters and other power electronics components becomes requisite. Further, as renewables enjoy broadening commercial implementation, power electronics professionals are interested to learn of the challenges and strategies particular to applications in alternative energy. This book will bring each group up-to-speed with the primary issues of importance at this technological node. This content clarifies the juncture of two key coverage areas for our Energy portfolio: alternative sources and power systems. It serves to bridge the information in our power engineering and renewable energy lists, supporting the growing grid cluster in the former and adding key information on practical implementation to the latter. Provides a thorough overview of the key technologies, methods and challenges for implementing power electronics in alternative energy systems for optimal power generation Includes hard-to-find information on how to apply converters, inverters, batteries, controllers and more for stand-alone and grid-connected systems Covers wind and solar applications, as well as ocean and geothermal energy, hybrid systems and fuel cells

Download or read book Introduction to Electrical Power and Power Electronics written by and published by . This book was released on 2018-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental changes in electricity generation and consumption are demanding the electricity system to perform in ways for which it was not designed-requiring new capabilities and system designs to maintain historical levels of reliability. The planning of electric power distribution in buildings and infrastructure facilities is subject to constant transformation. The search for an assignment-compliant, dependable solution should fulfill those usual requirements placed on cost optimization, efficiency, and time needs. At the same time, technical development innovations and findings from the practical world are constantly seeping into the planning process.This book brings together the detailed coverage of electrical power and power electronics with practical examples from industry. It encompasses selected topics and emerging technologies in power electronics, including components, systems, and processes used in solid-state energy conversion and applications in energy conservation and efficiency. The book describes recent advances in several key areas of power electronics technology, such as power semiconductor devices, power converter circuits, and control of power electronics. It will feature those technical details and descriptions of specific products and systems so as to fulfill the requirements specified in this volume. An increasing reliance on electricity presents significant challenges for utilities, state-level decision makers, and other stakeholders, who must improve reliability and resilience while cost-effectively managing the fundamental changes required to meet the needs of a low-carbon, digital economy. The electric power system is currently undergoing significant changes in the sources we rely on to generate electricity, the means by which we receive electricity, and even in the ways we consume electricity. This book focuses on the research, development, demonstration, and deployment needs to develop a modern electric power system.

Download or read book Research in Electric Power written by Philip Sporn and published by Elsevier. This book was released on 2016-02-09 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in Electric Power comprises the lectures presented in the Cornell University Lecture in 1965, which focuses on the research and development of electric energy or technology. The lectures compiled in this book are divided into three chapters. Chapter I traces the dramatic and exciting history of growth of the electric power industry and important contribution of a series of great technological developments. The second chapter examines in great detail the problems demanding research in the main areas of planning, design, and construction of the physical facilities; in successfully and economically operating the systems; and in developing the much-expanded markets for electric energy constituting the basic building blocks of the invention structure. Chapter III discusses a rational program for the organization of research in the American power industry, projecting on a series of plans that makes possible examination and focusing in forward-looking depth and breadth of scope on the industry's research needs in every quarter. This book is a useful reference to electrical engineering students and individuals who intend to gain knowledge on electric energy and its industries.

Download or read book Technologies for Integrated Energy Systems and Networks written by Giorgio Graditi and published by John Wiley & Sons. This book was released on 2022-03-30 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies for Integrated Energy Systems and Networks Explore emerging technologies that will play a central role in humanity’s transition to a low-carbon future In Technologies for Integrated Energy Systems and Networks, a team of distinguished authors delivers a detailed discussion of integrated energy systems and networks, including a comprehensive overview of emerging technologies. The book focuses on the technologies and systems that play a major role in integrated energy systems, like renewable and distributed energy resources, power conversion technologies, hydrogen, storage technologies, electric mobility, zero- and positive-energy buildings, and local energy communities. A one-of-a-kind and holistic treatment of integrated energy systems, this book explores power conversion, including power-to-gas, power-to-liquid, and power- to-heat technologies, as well as other issues of interest to a broad range of students, professionals, and academicians involved in energy transition. It also covers: A thorough introduction to the digitalization of the energy sector and local market development enabling citizen involvement Comprehensive explorations of integrated energy systems as an engine of energy transition Practical discussions of renewable and distributed energy resources for sustainable economic development In-depth examinations of the role of hydrogen in a low-carbon energy future and the storage technologies of different energy carriers Perfect for electrical, construction, power and energy engineers, Technologies for Integrated Energy Systems and Networks will also earn a place in the libraries of electrochemists and environmental consultants.