Download or read book Technologies for economic and functional lightweight design written by Klaus Dröder and published by Springer Nature. This book was released on 2021-03-10 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the conference “Future Production of Hybrid Structures 2020”, which took place in Wolfsburg. The conference focused on hybrid lightweight design, which is characterized by the combination of different materials with the aim of improving properties and reducing weight. In particular, production technologies for hybrid lightweight design were discussed, new evaluation methods for the ecological assessment of hybrid components were presented and future-oriented approaches motivated by nature for the development of components, assemblies and systems were introduced. Lightweight design is a key technology for the development of sustainable and resource-efficient mobility concepts. Vehicle manufacturers operate in an area of conflict between customer requirements, competition and legislation. Material hybrid structures, which combine the advantages of different materials, have a high potential for reducing weight, while simultaneously expanding component functionality. The future, efficient use of function-integrated hybrid structures in vehicle design requires innovations and constant developments in vehicle and production technology. There is a great demand, especially with regard to new methods and technologies, for "affordable" lightweight construction in large-scale production, taking into account the increasing requirements with regard to variant diversity, safety and quality.

Download or read book Technologies for economical and functional lightweight design written by Klaus Dröder and published by Springer. This book was released on 2019-03-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the conference “Faszination Hybrider Leichtbau 2018”, which took place in Wolfsburg. The conference focused on new methods and technologies for the development and production of multifunctional and hybrid lightweight solutions in large-scale vehicle manufacturing. Further, it promoted the exchange of insights and lessons learned between experts from industry and academia. Lightweight design and construction are key technologies for the development of sustainable and resource-efficient mobility concepts. Material hybrid structures, which combine the advantages of different materials (e.g. fiber-reinforced plastics and metals), have a high potential for reducing weight, while simultaneously expanding component functionality. However, the efficient use of functional integrated hybrid structures in vehicle construction, requires innovations and constant developments in vehicle and production technology. There is a great demand for affordable lightweight construction in mass production that takes into account the increasing requirements in terms of variant diversity, safety and quality- particularly with regards to new methods and technologies.

Download or read book Life Cycle Design Engineering of Lightweight Multi Material Automotive Body Parts written by Thomas Vietor and published by Springer Nature. This book was released on 2022-10-19 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the final report of the collaborative research project "MultiMaK2": MultiMaK2 contributed to the development of multi-material component concepts in large-scale automotive production. Whithin the project new methods in conceptual design of lightweight components were developed at the example of roof cross member and transmission tunnels. A concurrent Life Cycle Design & Engineering approach led to identifying eco- and cost efficient component alternatives. This includes evaluation tools for the concepts' full life cycle. Further, methods to integrate that knowledge into automotive engineering processes have been established based on principles of visual analytics. That brings forward a tight integration of data, engineering models and results visualization towards an informed knowledge building across disciplines. MultiMaK2 also compiled and structured design guidelines within a knowledge management system. All methods and tools have been embedded within the Life Cycle Design & Engineering Lab in the Open Hybrid LabFactory.

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Future Automotive Production Conference 2022 written by Klaus Dröder and published by Springer Nature. This book was released on 2023-03-18 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the conference “Future Automotive Production 2022”, which took place in Wolfsburg. The conference focused on hybrid lightweight design, which is characterized by the combination of different materials with the aim of improving properties and reducing weight. In particular, production technologies for hybrid lightweight design were discussed, new evaluation methods for the ecological assessment of hybrid components were presented and future-oriented approaches motivated by nature for the development of components, assemblies and systems were introduced. Lightweight design is a key technology for the development of sustainable and resource-efficient mobility concepts. Vehicle manufacturers operate in an area of conflict between customer requirements, competition and legislation. Material hybrid structures, which combine the advantages of different materials, have a high potential for reducing weight, while simultaneously expanding component functionality. The future, efficient use of function-integrated hybrid structures in vehicle design requires innovations and constant developments in vehicle and production technology. There is a great demand, especially with regard to new methods and technologies, for "affordable" lightweight construction in large-scale production, taking into account the increasing requirements with regard to variant diversity, safety and quality.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Science Technology and Development written by Charles Cooper and published by Routledge. This book was released on 2012-11-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published in the year 1973, Science, Technology and Development is a valuable contribution to the field of Economics.

Download or read book Material Forming written by Lukasz Madej and published by Materials Research Forum LLC. This book was released on 2023-04-25 with total page 2163 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present papers on Additive Manufacturing, Composites Forming Processes, Extrusion and Drawing, Forging and Rolling, Formability of Metallic Materials, Friction and Wear in Metal Forming, Incremental and Sheet Metal Forming, Innovative Joining by Forming Technologies, Lionel Fourment MS on Optimization and Inverse Analysis in Forming, Machining and Cutting, Material Behavior Modelling, New and Advanced Numerical Strategies for Material Forming, Non-Conventional Processes, Polymer Processing and Thermomechanical Properties, Sustainability on Material Forming, and Property-Controlled Forming.

Download or read book Manufacturing in the New Urban Economy written by Willem van Winden and published by Routledge. This book was released on 2010-10-04 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: In large cities in developed countries, the share of manufacotruing has declined drastically in the last decades and the share of service has grown as many manufacturing firms have closed or moved to lower-cost locations. The process of deindustrialization is often seen as part of the inevitable shift towards a knowledge based economy and urban economies come to rely on research and development, financial services, tourism and the creative industries. This book looks at the changing link between manufacturing and knowledge-based activities in urban regions. The authors develop a new framework drawing on insights from organization studies and regional economic literature looking at various international case studies in Western and Eastern Europe, South America and Asia.

Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

Download or read book Application of Lightweighting Technology to Military Aircraft Vessels and Vehicles written by National Research Council and published by National Academies Press. This book was released on 2012-04-27 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweighting is a concept well known to structural designers and engineers in all applications areas, from laptops to bicycles to automobiles to buildings and airplanes. Reducing the weight of structures can provide many advantages, including increased energy efficiency, better design, improved usability, and better coupling with new, multifunctional features. While lightweighting is a challenge in commercial structures, the special demands of military vehicles for survivability, maneuverability and transportability significantly stress the already complex process. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft assesses the current state of lightweighting implementation in land, sea, and air vehicles and recommends ways to improve the use of lightweight materials and solutions. This book considers both lightweight materials and lightweight design; the availability of lightweight materials from domestic manufacturers; and the performance of lightweight materials and their manufacturing technologies. It also considers the "trade space"-that is, the effect that use of lightweight materials or technologies can have on the performance and function of all vehicle systems and components. This book also discusses manufacturing capabilities and affordable manufacturing technology to facilitate lightweighting. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft will be of interest to the military, manufacturers and designers of military equipment, and decision makers.

Download or read book The World is Triangular written by Horst Czichos and published by Springer Nature. This book was released on 2020-12-14 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a short presentation of the triad philosophy–physics–technology against the background of the common origin in ancient times. This is the first English edition of this book, previously published in German. The emergence of the book has been described in the foreword of the first German edition. This edition is updated and extended, whereby new physical research results and technological innovations were included: - The physics of space and time after the experimental detection of gravitational waves (Nobel Prize for Physics 2017). - The New International System of Units (SI) for Physics and Technology which is completely based on natural constants and entered into force on World Metrology Day, 20 May 2019. - Actual overview of basic technologies: Material, Energy, Information. - Technologies for the “Digital World” of information and communication. - Mechatronic and Cyber-physical systems for Industry 4.0. The significance of technology for the world in the 21st century is discussed in the final section of the book.

Download or read book Energy Efficiency and Sustainable Lighting written by Manuel J. Hermoso-Orzáez and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lighting of both exteriors and interiors is a field within electrical and lighting engineering, where important technological changes have been taking place oriented towards environmental sustainability and energy efficiency. LED technology has been gradually gaining ground in the world of lighting over other technologies due to its high lighting and energy efficiency and savings. However, some problems related to overheating or associated regulation are emerging. This has prompted the search for new, more efficient, and sustainable forms of lighting. This book presents successful cases related to energy efficiency and lighting that may be of great interest to those trying to enter the world of scientific research.

Download or read book Moving Integrated Product Development to Service Clouds in the Global Economy written by J. Stjepandić and published by IOS Press. This book was released on 2014-09-23 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of concurrent engineering is based on the concept that the different phases of a product lifecycle should be conducted concurrently and initiated as early as possible within the product creation process. Concurrent engineering is important in many industries, including automotive, aerospace, shipbuilding, consumer goods and environmental engineering, as well as in the development of new services and service support. This book presents the proceedings of the 21st ISPE Inc. International Conference on Concurrent Engineering, held at Beijing Jiaotong University, China, in September 2014. It is the first volume of a new book series: 'Advances in Transdisciplinary Engineering'. The title of the CE2014 conference is: 'Moving Integrated Product Development to Service Clouds in the Global Economy', which reflects the variety of processes and methods which influence modern product creation. After an initial first section presenting the keynote papers, the remainder of the book is divided into 11 further sections with peer-reviewed papers: product lifecycle management (PLM); knowledge-based engineering (KBE); cloud approaches; 3-D printing applications; design methods; educational methods and achievements; simulation of complex systems; systems engineering; services as innovation and science; sustainability; and recent research on open innovation in concurrent engineering. The book will be of interest to CE researchers, practitioners from industry and public bodies, and educators alike.

Download or read book Technology Innovation for the Circular Economy written by Nabil Nasr and published by John Wiley & Sons. This book was released on 2024-01-19 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: TECHNOLOGY INNOVATION FOR THE CIRCULAR ECONOMY The book comprises 56 peer-reviewed chapters comprehensively covering in-depth areas of circular economy design, planning, business models, and enabling technologies. Some of the greatest opportunities for innovation in the circular economy are in remanufacturing, refurbishment, reuse, and recycling. Critical to its growth, however, are developments in product design approaches and the manufacturing business model that are often met with challenges in the current, largely linear economies of today’s global manufacturing chains. The conference hosted by the REMADE Institute in Rochester, NY, brought together U.S. and international researchers, industry engineers, technologists, and policymakers, to discuss the myriad intertwining issues relating to the circular economy. This book consists of 56 chapters in 10 distinct parts covering broad areas of research and applications in the circular economy area. The first four parts explore the system level work related to circular economy approaches, models and advancements including the use of artificial intelligence (AI) and machine learning to guide implementation, as well as design for circularity approaches. Mechanical and chemical recycling technologies follow, highlighting some of the most advanced research in those areas. Next, innovation in remanufacturing is addressed with descriptions of some of the most advanced work in this field. This is followed by tire remanufacturing and recycling, highlighting innovative technologies in addressing the volume of end-of-use tires. Pathways to net-zero emissions in manufacturing of materials concludes the book, with a focus on industrial decarbonization. Audience This book has a wide audience in academic institutes, business professionals and engineers in a variety of manufacturing industries. It will also appeal to economists and policymakers working on the circular economy, clean tech investors, industrial decision-makers, and environmental professionals.

Download or read book Affordable Housing Construction R D written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Technology, Environment, and Aviation and published by . This book was released on 1993 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: