Download or read book Techno economic Comparison of Hot Water and Dilute Acid Pretreatment for Biochemical Production of Ethanol from Corn Stover and Evaluation of Alternative Scenarios to Purchasing Cellulase Enzymes written by Joshua A. Fortman and published by . This book was released on 2009 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pretreatment of Biomass written by Ashok Pandey and published by Academic Press. This book was released on 2014-09-18 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pretreatment of Biomass provides general information, basic data, and knowledge on one of the most promising renewable energy sources—biomass for their pretreatment—which is one of the most essential and critical aspects of biomass-based processes development. The quest to make the environment greener, less polluted, and less hazardous has led to the concept of biorefineries for developing bio-based processes and products using biomass as a feedstock. Each kind of biomass requires some kind of pretreatment to make it suitable for bioprocess. This book provides state-of-art information on the methods currently available for this. This book provides data-based scientific information on the most advanced and innovative pretreatment of lignocellulosic and algal biomass for further processing. Pretreatment of biomass is considered one of the most expensive steps in the overall processing in a biomass-to-biofuel program. With the strong advancement in developing lignocellulose biomass- and algal biomass-based biorefineries, global focus has been on developing pretreatment methods and technologies that are technically and economically feasible. This book provides a comprehensive overview of the latest developments in methods used for the pretreatment of biomass. An entire section is devoted to the methods and technologies of algal biomass due to the increasing global attention of its use. - Provides information on the most advanced and innovative pretreatament processes and technologies for biomass - Covers information on lignocellulosic and algal biomass to work on the principles of biorefinery - Useful for researchers intending to study scale-up - Provides information on integration of processes and technologies for the pretreatment of biomass
Download or read book Process Design and Economics for Biochemical Conversion of Lignocellulosic Biomass to Ethanol written by and published by . This book was released on 2011 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes one potential biochemical ethanol conversion process, conceptually based upon core conversion and process integration research at NREL. The overarching process design converts corn stover to ethanol by dilute-acid pretreatment, enzymatic saccharification, and co-fermentation. Building on design reports published in 2002 and 1999, NREL, together with the subcontractor Harris Group Inc., performed a complete review of the process design and economic model for the biomass-to-ethanol process. This update reflects NREL's current vision of the biochemical ethanol process and includes the latest research in the conversion areas (pretreatment, conditioning, saccharification, and fermentation), optimizations in product recovery, and our latest understanding of the ethanol plant's back end (wastewater and utilities). The conceptual design presented here reports ethanol production economics as determined by 2012 conversion targets and "nth-plant" project costs and financing. For the biorefinery described here, processing 2,205 dry ton/day at 76% theoretical ethanol yield (79 gal/dry ton), the ethanol selling price is $2.15/gal in 2007 dollars.
Download or read book Handbook of Biofuels Production written by Rafael Luque and published by Woodhead Publishing. This book was released on 2016-05-19 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Biofuels Production, Second Edition, discusses advanced chemical, biochemical, and thermochemical biofuels production routes that are fast being developed to address the global increase in energy usage. Research and development in this field is aimed at improving the quality and environmental impact of biofuels production, as well as the overall efficiency and output of biofuels production plants. The book provides a comprehensive and systematic reference on the range of biomass conversion processes and technology. Key changes for this second edition include increased coverage of emerging feedstocks, including microalgae, more emphasis on by-product valorization for biofuels' production, additional chapters on emerging biofuel production methods, and discussion of the emissions associated with biofuel use in engines. The editorial team is strengthened by the addition of two extra members, and a number of new contributors have been invited to work with authors from the first edition to revise existing chapters, thus offering fresh perspectives. - Provides systematic and detailed coverage of the processes and technologies being used for biofuel production - Discusses advanced chemical, biochemical, and thermochemical biofuels production routes that are fast being developed to address the global increase in energy usage - Reviews the production of both first and second generation biofuels - Addresses integrated biofuel production in biorefineries and the use of waste materials as feedstocks
Download or read book Techno Economic Analysis of Biochemical Scenarios for Production of Cellulosic Ethanol written by and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A techno-economic analysis on the production of cellulosic ethanol by fermentation was conducted to understand the viability of liquid biofuel production processes within the next 5-8 years. Initially, 35 technologies were reviewed, then a two-step down selection was performed to choose scenarios to be evaluated in a more detailed economic analysis. The lignocellulosic ethanol process was selected because it is well studied and portions of the process have been tested at pilot scales. Seven process variations were selected and examined in detail. Process designs were constrained to public data published in 2007 or earlier, without projecting for future process improvements. Economic analysis was performed for an 'nth plant' (mature technology) to obtain total investment and product value (PV). Sensitivity analysis was performed on PV to assess the impact of variations in process and economic parameters. Results show that the modeled dilute acid pretreatment process without any downstream process variation had the lowest PV of $3.40/gal of ethanol ($5.15/gallon of gasoline equivalent) in 2007 dollars. Sensitivity analysis shows that PV is most sensitive to feedstock and enzyme costs.
Download or read book Fuel Ethanol Production from Sugarcane written by Thalita Peixoto Basso and published by BoD – Books on Demand. This book was released on 2019-01-23 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad understanding of bioethanol production from sugarcane, although a few other substrates, except corn, will also be mentioned. The 10 chapters are grouped in five sections. The Fuel Ethanol Production from Sugarcane in Brazil section consists of two chapters dealing with the first-generation ethanol Brazilian industrial process. The Strategies for Sugarcane Bagasse Pretreatment section deals with emerging physicochemical methods for biomass pretreatment, and the non-conventional biomass source for lignocellulosic ethanol production addresses the potential of weed biomass as alternative feedstock. In the Recent Approaches for Increasing Fermentation Efficiency of Lignocellulosic Ethanol section, potential and research progress using thermophile bacteria and yeasts is presented, taking advantage of microorganisms involved in consolidating or simultaneous hydrolysis and fermentation processes. Finally, the Recent Advances in Ethanol Fermentation section presents the use of cold plasma and hydrostatic pressure to increase ethanol production efficiency. Also in this section the use of metabolic-engineered autotrophic cyanobacteria to produce ethanol from carbon dioxide is mentioned.
Download or read book Sustainable Degradation of Lignocellulosic Biomass written by Anuj Chandel and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides important aspects of sustainable degradation of lignocellulosic biomass which has a pivotal role for the economic production of several value-added products and biofuels with safe environment. Different pretreatment techniques and enzymatic hydrolysis process along with the characterization of cell wall components have been discussed broadly. The following features of this book attribute its distinctiveness: This book comprehensively covers the improvement in methodologies for the biomass pretreatment, hemicellulose and cellulose breakdown into fermentable sugars, the analytical methods for biomass characterization, and bioconversion of cellulosics into biofuels. In addition, mechanistic analysis of biomass pretreatment and enzymatic hydrolysis have been discussed in details, highlighting key factors influencing these processes at industrial scale.
Download or read book NREL 2012 Achievement of Ethanol Cost Targets written by Ling Tao and published by . This book was released on 2014 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the DOE Bioenergy Technologies Office, the annual State of Technology (SOT) assessment is an essential activity for quantifying the benefits of biochemical platform research. This assessment has historically allowed the impact of research progress achieved through targeted Bioenergy Technologies Office funding to be quantified in terms of economic improvements within the context of a fully integrated cellulosic ethanol production process. As such, progress toward the ultimate 2012 goal of demonstrating cost-competitive cellulosic ethanol technology can be tracked. With an assumed feedstock cost for corn stover of $58.50/ton this target has historically been set at $1.41/gal ethanol for conversion costs only (exclusive of feedstock) and $2.15/gal total production cost (inclusive of feedstock) or minimum ethanol selling price (MESP). This year, fully integrated cellulosic ethanol production data generated by National Renewable Energy Laboratory (NREL) researchers in their Integrated Biorefinery Research Facility (IBRF) successfully demonstrated performance commensurate with both the FY 2012 SOT MESP target of $2.15/gal (2007$, $58.50/ton feedstock cost) and the conversion target of $1.41/gal through core research and process improvements in pretreatment, enzymatic hydrolysis, and fermentation.
Download or read book Techno economic Analysis of Biochemical Scenarios for Production of Cellulosic Ethanol written by and published by . This book was released on 2010 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: A techno-economic analysis on the production of cellulosic ethanol by fermentation was conducted to understand the viability of liquid biofuel production processes within the next 5-8 years. Initially, 35 technologies were reviewed, then a two-step down selection was performed to choose scenarios to be evaluated in a more detailed economic analysis. The lignocellulosic ethanol process was selected because it is well studied and portions of the process have been tested at pilot scales. Seven process variations were selected and examined in detail. Process designs were constrained to public data published in 2007 or earlier, without projecting for future process improvements. Economic analysis was performed for an 'nth plant' (mature technology) to obtain total investment and product value (PV). Sensitivity analysis was performed on PV to assess the impact of variations in process and economic parameters. Results show that the modeled dilute acid pretreatment process without any downstream process variation had the lowest PV of $3.40/gal of ethanol ($5.15/gallon of gasoline equivalent) in 2007 dollars. Sensitivity analysis shows that PV is most sensitive to feedstock and enzyme costs.
Download or read book Lignocellulosic Biomass to Value Added Products written by Mihir Kumar Purkait and published by Elsevier. This book was released on 2021-06-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulosic Biomass to Value-Added Products: Fundamental Strategies and Technological Advancements focuses on fundamental and advanced topics surrounding technologies for the conversion process of lignocellulosic biomass. Each and every concept related to the utilization of biomass in the process of conversion is elaborately explained, with importance given to minute details. Advanced level technologies involved in the conversion of biomass into biofuels, like bioethanol and biobutanol, are addressed, along with the process of pyrolysis. Readers of this book will become fully acquainted with the field of lignocellulosic conversion, from its basics to current research accomplishments. The uniqueness of the book lies in the fact that it covers each and every topic related to biomass and its conversion into value-added products. Technologies involved in the major areas of pretreatment, hydrolysis and fermentation are explained precisely. Additional emphasis is given to the analytical part, especially the established protocols for rapid and accurate quantification of total sugars obtained from lignocellulosic biomass. - Includes chapters arranged in a flow-through manner - Discusses mechanistic insights in different phenomena using colorful figures for quick understanding - Provides the most up-to-date information on all aspects of the conversion of individual components of lignocellulosic biomass
Download or read book Aqueous Pretreatment of Plant Biomass for Biological and Chemical Conversion to Fuels and Chemicals written by Charles E. Wyman and published by John Wiley & Sons. This book was released on 2013-03-27 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant biomass is attracting increasing attention as a sustainable resource for large-scale production of renewable fuels and chemicals. However, in order to successfully compete with petroleum, it is vital that biomass conversion processes are designed to minimize costs and maximize yields. Advances in pretreatment technology are critical in order to develop high-yielding, cost-competitive routes to renewable fuels and chemicals. Aqueous Pretreatment of Plant Biomass for Biological and Chemical Conversion to Fuels and Chemicals presents a comprehensive overview of the currently available aqueous pretreatment technologies for cellulosic biomass, highlighting the fundamental chemistry and biology of each method, key attributes and limitations, and opportunities for future advances. Topics covered include: • The importance of biomass conversion to fuels • The role of pretreatment in biological and chemical conversion of biomass • Composition and structure of biomass, and recalcitrance to conversion • Fundamentals of biomass pretreatment at low, neutral and high pH • Ionic liquid and organosolv pretreatments to fractionate biomass • Comparative data for application of leading pretreatments and effect of enzyme formulations • Physical and chemical features of pretreated biomass • Economics of pretreatment for biological processing • Methods of analysis and enzymatic conversion of biomass streams • Experimental pretreatment systems from multiwell plates to pilot plant operations This comprehensive reference book provides an authoritative source of information on the pretreatment of cellulosic biomass to aid those experienced in the field to access the most current information on the topic. It will also be invaluable to those entering the growing field of biomass conversion.
Download or read book Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co Current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis for Corn Stover written by and published by . This book was released on 2002 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is an update of NREL's ongoing process design and economic analyses of processes related to developing ethanol from lignocellulosic feedstocks. The U.S. Department of Energy (DOE) is promoting the development of ethanol from lignocellulosic feedstocks as an alternative to conventional petroleum-based transportation fuels. DOE funds both fundamental and applied research in this area and needs a method for predicting cost benefits of many research proposals. To that end, the National Renewable Energy Laboratory (NREL) has modeled many potential process designs and estimated the economics of each process during the last 20 years. This report is an update of the ongoing process design and economic analyses at NREL. We envision updating this process design report at regular intervals; the purpose being to ensure that the process design incorporates all new data from NREL research, DOE funded research and other sources, and that the equipment costs are reasonable and consistent with good engineering practice for plants of this type. For the non-research areas this means using equipment and process approaches as they are currently used in industrial applications. For the last report, published in 1999, NREL performed a complete review and update of the process design and economic model for the biomass-to-ethanol process utilizing co-current dilute acid prehydrolysis with simultaneous saccharification (enzymatic) and co-fermentation. The process design included the core technologies being researched by the DOE: prehydrolysis, simultaneous saccharification and co-fermentation, and cellulase enzyme production. In addition, all ancillary areas--feed handling, product recovery and purification, wastewater treatment (WWT), lignin combustor and boiler-turbogenerator, and utilities--were included. NREL engaged Delta-T Corporation (Delta-T) to assist in the process design evaluation, the process equipment costing, and overall plant integration. The process design and costing for the lignin combustor and boiler turbogenerator was reviewed by Reaction Engineering Inc. (REI) and Merrick & Company reviewed the wastewater treatment. Since then, NREL has engaged Harris Group (Harris) to perform vendor testing, process design, and costing of critical equipment identified during earlier work. This included solid/liquid separation and pretreatment reactor design and costing. Corn stover handling was also investigated to support DOE's decision to focus on corn stover as a feedstock for lignocellulosic ethanol. Working with Harris, process design and costing for these areas were improved through vendor designs, costing, and vendor testing in some cases. In addition to this work, enzyme costs were adjusted to reflect collaborative work between NREL and enzyme manufacturers (Genencor International and Novozymes Biotech) to provide a delivered enzyme for lignocellulosic feedstocks. This report is the culmination of our work and represents an updated process design and cost basis for the process using a corn stover feedstock. The process design and economic model are useful for predicting the cost benefits of proposed research. Proposed research results can be translated into modifications of the process design, and the economic impact can be assessed. This allows DOE, NREL, and other researchers to set priorities on future research with an understanding of potential reductions to the ethanol production cost. To be economically viable, ethanol production costs must be below market values for ethanol. DOE has chosen a target ethanol selling price of $1.07 per gallon as a goal for 2010. The conceptual design and costs presented here are based on a 2010 plant start-up date. The key research targets required to achieve this design and the $1.07 value are discussed in the report.
Download or read book Integrated Biorefineries written by Paul R. Stuart and published by CRC Press. This book was released on 2012-12-10 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Biorefineries: Design, Analysis, and Optimization examines how to create a competitive edge in biorefinery innovation through integration into existing processes and infrastructure. Leading experts from around the world working in design, synthesis, and optimization of integrated biorefineries present the various aspects of this complex
Download or read book Wood Chemistry written by Eero Sjostrom and published by Elsevier. This book was released on 2013-10-22 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood Chemistry, Fundamentals and Applications, Second Edition, examines the basic principles of wood chemistry and its potential applications to pulping and papermaking, wood and wood waste utilization, pulping by-products for production of chemicals and energy, and biomass conversion.
Download or read book Comparison of Kinetics of Xylose and Lignin Removal During Hot Water and Dilute Acid Pretreatment of Corn Stover using a Continuous Flow Through Reactor Poster written by and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to Chemical Engineering Process Design and Economics written by Gael D. Ulrich and published by . This book was released on 1984-03-13 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Upper-level undergraduate text for process design courses in chemical engineering. Introduces students to the technology and terminology they will encounter in industrial practice. Presents short-cut techniques for specifying equipment or isolating important elements of a design project. Emphasizes project definition, flow sheet development and equipment specification. Covers the economics of process design. End-of-chapter exercises guide students through step-by-step solutions of design problems. Includes four case studies from past AICHE competitions.
Download or read book Waste Valorisation written by Carol Sze Ki Lin and published by John Wiley & Sons. This book was released on 2020-12-14 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the wide-variety of waste valorisation techniques related to various biomass, waste materials and by products Waste Valorisation provides a comprehensive review of waste chemistry and its application to the generation of value-added products. The authors – noted experts on the topic – offer a clear understanding of waste diversity, drivers and policies governing its valorisation based on the location. The book provides information on the principles behind various valorisation schemes and offers a description of general treatment options with their evaluation guidelines in terms of cost, energy consumption and waste generation. Each of the book's chapters contain an introduction which summarises the current production and processing methods, yields, energy sources and other pertinent information for each specific type of waste. The authors focus on the most relevant novel technologies for value-added processing of waste streams or industrial by-products which can readily be integrated into current waste management systems. They also provide the pertinent technical, economic, social and environmental evaluations of bioconversions as future sustainable technologies in a biorefinery. This important book: Presents the most current technologies which integrate waste and/or by-product valorisation Includes discussions on end-product purity and life-cycle assessment challenges Explores relevant novel technologies for value-added processing of waste streams or industrial by-products which can be integrated into current waste management systems Offers a guide to waste reuse, a key sustainability goal for existing biorefineries wishing to reduce material and environmental costs Written for academic researchers and industrial scientists working in agricultural and food production, bioconversions and waste management professionals, Waste Valorisation is an authoritative guide to the chemistry and applications of waste materials and provides an overview of the most recent developments in the field.
