Download or read book Handbook of Technical Diagnostics written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.

Download or read book Advances in Technical Diagnostics II written by Andrzej Puchalski and published by Springer Nature. This book was released on 2023-05-20 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on recent theories and methods for diagnostics and condition monitoring of machines, materials and industrial processes, with a special emphasis on the application of artificial intelligence and intelligent control systems. Gathering original contributions to the 7th International Congress on Technical Diagnostics, ICTD2022, held on September 14–16, 2022, in Radom, Poland, this book offers extensive information on the latest trends in machine diagnostics and on IoT, smart sensors and machine learning technology in advanced condition monitoring. It addresses both scientists and professionals and is intended to foster communication and collaborations between the two groups.

Download or read book Advances in Technical Diagnostics written by Anna Timofiejczuk and published by Springer. This book was released on 2017-09-04 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an overview of recent theories and methods for machinery diagnostics applied to machinery maintenance. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work discussed at the International Congress on Technical Diagnostics, ICTD2016, held on September 12 – 16, 2016, in Gliwice, Poland. The book covers a broad range of topics, including machines operating in non-stationary conditions, and examples from different industrial fields of mechanical, civil, computer and electronic engineering as well as the medical, food, automotive, and mining industries. By presenting state-of-the-art diagnostic solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals as well as a bridge to facilitate communication and collaboration between the two groups.

Download or read book Fault Diagnosis written by Józef Korbicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive work presents the status and likely development of fault diagnosis, an emerging discipline of modern control engineering. It covers fundamentals of model-based fault diagnosis in a wide context, providing a good introduction to the theoretical foundation and many basic approaches of fault detection.

Download or read book Advances and Trends in Engineering Sciences and Technologies written by Mohamad Ali and published by CRC Press. This book was released on 2015-10-06 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Engineering Sciences and Technologies (ESaT 2015), organized under the auspices of the Faculty of Civil Engineering, Technical University in Koice Slovak Republic was held May 2729, 2015 in the High Tatras, Slovak Republic. Facilitating discussions on novel and fundamental advances in the fields of

Download or read book Information Technology in Medical Diagnostics written by Waldemar Wójcik and published by CRC Press. This book was released on 2017-07-20 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many centuries, people have tried to learn about the state of their health. Initially, in the pre-technological period, they had to rely only on their senses. Then there were simple tools to help the human senses. The discovery of X-rays, which allowed people to look “inside” the body, turned out to be a major breakthrough. Contemporary medical diagnostics is increasingly being assisted by information technology that allows, for example, thorough image tissue analysis or pathology differentiation. They also allow very early preventive diagnostics. Influenced by information technology, “classic” diagnostic techniques change and new ones arise. Information Technology in Medical Diagnostics presents selected and extended conference papers from Polish, Ukrainian and Kazakh scientists. They address problems of the application of new methods of image processing for analysis of medical images, new methods of classification of medical data as well as new medical imaging methods. Some of the presented technologies are inspired by the functioning of living organisms. Information Technology in Medical Diagnostics is of interest not only to academics and engineers, but also to professionals involved in biomedical engineering, and seeking for solutions for issues that cannot be solved with the help of “traditional” technologies.

Download or read book Diagnostics of Mechatronic Systems written by Pavol Božek and published by Springer Nature. This book was released on 2021-03-03 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides novel approach to the diagnosis of complex technical systems that are widely used in various kinds of transportation, energy, metallurgy, metalworking, fuels, mining, chemical, paper industries, etc. Effective diagnostic systems are necessary for the early detection of errors in mechatronic systems, for the organization of maintenance and for the assessment of the performed service quality. Unfortunately, the practical use of AI in the diagnosis of mechatronic systems is still quite limited and the inability to build effective mechatronic systems leads to significant economic losses and dangers. The main aim of this book is to contribute to knowledge within the topic of diagnostics of mechatronic systems by the analysis of the elements reliability characteristics, using methods, models and algorithms for diagnostics and by studying examples of model diagnostic systems using AI methods based on neural networks, fuzzy inference systems and genetic algorithms.

Download or read book Information Technology in Medical Diagnostics II written by Waldemar Wójcik and published by CRC Press. This book was released on 2019-02-13 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many centuries, mankind has tried to learn about his health. Initially, during the pre-technological period, he could only rely on his senses. Then there were simple tools to help the senses. The breakthrough turned out to be the discovery of X-rays, which gave insight into the human body. Contemporary medical diagnostics are increasingly supported by information technology, which for example offers a very thorough analysis of the tissue image or the pathology differentiation. It also offers possibilities for very early preventive diagnosis. Under the influence of information technology, 'traditional' diagnostic techniques and new ones are changing. More and more often the same methods can be used for both medical and technical diagnostics. In addition, methodologies are developed that are inspired by the functioning of living organisms. Information Technology in Medical Diagnostics II is the second volume in a series showing the latest advances in information technologies directly or indirectly applied to medical diagnostics. Unlike the previous book, this volume does not contain closed chapters, but rather extended versions of presentations made during two conferences: XLVIII International Scientific and Practical Conference ‘Application of Lasers in Medicine and Biology’ (Kharkov, Ukraine) and the International Scientific Internet conference ‘Computer graphics and image processing’ (Vinnitsa, Ukriane), both held in May 2018. Information Technology in Medical Diagnostics II links technological issues to medical and biological issues, and will be valuable to academics and professionals interested in medical diagnostics and IT.

Download or read book Home Performance Diagnostics the Guide to Advanced Testing written by Corbett Lunsford and published by the Building Performance Workshop. This book was released on 2012-02-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOW AT YOUR FINGERTIPS: Every performance test for completing a home energy audit. If you're a professional in today's fast-evolving industry of high performance construction and retrofits, then you've probably found yourself wondering a few things: Who can show me how to run that test? How do I get the most out of the equipment I own? Why do the tests work, and how do I explain them? What quality control methods should I use? Which tools will make my job faster and easier? With this guide, experienced and new diagnosticians alike will get step-by-step details on advanced testing, complete with best practices, important concepts and pitfalls, ways to present data to the client, Step-By-Step photographs, and time-saving tips, plus quiz questions for each diagnostic!

Download or read book Condition Monitoring and Diagnostic Engineering Management written by A. Starr and published by Elsevier. This book was released on 2001-09-14 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers presented at the 14th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), held in Manchester, UK, on 4-6 September 2001. COMADEM 2001 builds on the excellent reputation of previous conferences in this series, and is essential for anyone working in the field of condition monitoring and maintenance management.The scope of the conference is truly interdisciplinary. The Proceedings contains papers from six continents, written by experts in industry and academia the world over, bringing together the latest thoughts on topics including: Condition-based maintenance Reliability centred maintenance Asset management Industrial case studies Fault detection and diagnosis Prognostics Non-destructive evaluation Integrated diagnostics Vibration Oil and debris analysis Tribology Thermal techniques Risk assessment Structural health monitoring Sensor technology Advanced signal processing Neural networks Multivariate statistics Data compression and fusion This Proceedings also contains a wealth of industrial case studies, and the latest developments in education, training and certification. For more information on COMADEM's aims and scope, please visit http://www.comadem.com

Download or read book Power Engineering written by Viorel Badescu and published by CRC Press. This book was released on 2018-12-07 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, power engineering has been a subfield of energy engineering and electrical engineering which deals with the generation, transmission, distribution and utilization of electric power and the electrical devices connected to such systems including generators, motors and transformers. Implicitly this perception is associated with the generation of power in large hydraulic, thermal and nuclear plants and distributed consumption. Faced with the climate change phenomena, humanity has had to now contend with changes in attitudes in respect of environment protection and depletion of classical energy resources. These have had consequences in the power production sector, already faced with negative public opinions on nuclear energy and favorable perception of renewable energy resources and about distributed power generation. The objective of this edited book is to review all these changes and to present solutions for future power generation. Future energy systems must factor in the changes and developments in technology like improvements of natural gas combined cycles and clean coal technologies, carbon dioxide capture and storage, advancements in nuclear reactors and hydropower, renewable energy engineering, power-to-gas conversion and fuel cells, energy crops, new energy vectors biomass-hydrogen, thermal energy storage, new storage systems diffusion, modern substations, high voltage engineering equipment and compatibility, HVDC transmission with FACTS, advanced optimization in a liberalized market environment, active grids and smart grids, power system resilience, power quality and cost of supply, plug-in electric vehicles, smart metering, control and communication technologies, new key actors as prosumers, smart cities. The emerging research will enhance the security of energy systems, safety in operation, protection of environment, improve energy efficiency, reliability and sustainability. The book reviews current literature in the advances, innovative options and solutions in power engineering. It has been written for researchers, engineers, technicians and graduate and doctorate students interested in power engineering.

Download or read book MECHANICAL ENGINEERING ENERGY SYSTEMS AND SUSTAINABLE DEVELOPMENT Volume I written by Konstantin V. Frolov and published by EOLSS Publications. This book was released on 2009-04-15 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering, Energy Systems and Sustainable Development theme is a component of Encyclopedia of Physical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Mechanical Engineering, Energy Systems and Sustainable Development with contributions from distinguished experts in the field discusses mechanical engineering - the generation and application of heat and mechanical power and the design, production, and use of machines and tools. These five volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.

Download or read book Intelligent Systems in Production Engineering and Maintenance written by Anna Burduk and published by Springer. This book was released on 2018-07-31 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wrocław University of Science and Technology and was held in Wrocław (Poland) on 17–18 September 2018. The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 – particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development. The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on: 1. Computer Aided methods in Production Engineering 2. Mining 4.0 and Intelligent Mining Transportation 3. Modelling and Simulation of Production Processes 4. Multi-Faceted Modelling of Networks and Processes 5. Product Design and Product Manufacturing in Industry 4.0 This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.

Download or read book Innovations Induced by Research in Technical Systems written by Maciej Majewski and published by Springer Nature. This book was released on 2020-01-03 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative technologies and their applications in the field of mechanical engineering, covering new design methods as well as the practical implementation and optimization of existing ones to satisfy growing and changing industrial needs. The book features the proceedings of the International Online Conference on Innovations Induced by Research in Technical Systems (IIRTS’2019), organized by the Department of Technical and Informatics Systems Engineering – Faculty of Mechanical Engineering, Koszalin University of Technology (Poland). The book offers a snapshot of innovative methods, cutting-edge applications, and industrially relevant findings in the broad field of technical systems.

Download or read book Fundamentals of Evaluation and Diagnostics of Welded Structures written by A Nedoseka and published by Elsevier. This book was released on 2012-08-31 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Evaluation and Diagnostics of Welded Structures provides an essential guide to the key principles and problems involved in the analysis of welded structures. Chapter one discusses design issues, key equations and calculations, and the effects of varied heat sources in relation to the temperature field in welding. Chapter two goes on to explore welding stresses and strains. Fracture mechanics and the load-carrying capacity of welded structures are the focus of chapter three. Chapter four considers diagnostics and prediction of the residual life of welded structures, whilst acoustic emission techniques for the analysis of welded structures are reviewed in chapter five. Finally, chapter six supplies supplementary information on numerical techniques and other tests for welded structures.With its distinguished author and detailed coverage, Fundamentals of evaluation and diagnostics of welded structures is an indispensable guide for welding and structural engineers as well as those researching this important topic.

Download or read book Comparative Analysis of Technological and Intelligent Terrorism Impacts on Complex Technical Systems written by N.A. Makhutov and published by IOS Press. This book was released on 2013-01-10 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insider knowledge about a complex technical system, coupled with access to its elements, has the potential to be used for triggering the most disastrous of terrorist attacks. Technological terrorism is the unauthorized impact on a complex technical system with the intention of breaking down its protection and initiating secondary catastrophic processes to cause damage and loss outside the facility. Intelligent terrorism, on the other hand, is the unauthorized purposeful interference in the processes of design, construction or maintenance of a complex technical system, and is either aimed at increasing existing vulnerabilities or creating new ones. This book is based on the NATO Advanced Research Workshop (ARW) on ‘Comparative Analysis of Technological and Intelligence Terrorism Impacts on Complex Technical Systems’. It lays the foundation for a risk-informed approach to modeling, analyzing, managing and controlling complex technical systems in the face of terrorist attacks. To formulate such an approach, it is necessary to combine the insights of a spectrum of disciplines across engineering, human and social sciences, and economics. The book explains how an understanding of the vulnerabilities of complex technical systems to terrorist attack can reduce these vulnerabilities and contain or limit the impact of terrorism, and also the way in which such an understanding is crucial to the development of a set of design criteria and codes which will take such vulnerabilities into account. The book also identifies areas of further research and opportunities for future exchange and collaboration.

Download or read book Mechanical Engineering written by Murat Gokcek and published by BoD – Books on Demand. This book was released on 2012-04-11 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book substantially offers the latest progresses about the important topics of the "Mechanical Engineering" to readers. It includes twenty-eight excellent studies prepared using state-of-art methodologies by professional researchers from different countries. The sections in the book comprise of the following titles: power transmission system, manufacturing processes and system analysis, thermo-fluid systems, simulations and computer applications, and new approaches in mechanical engineering education and organization systems.