Download or read book Manufacturing Strategy written by John E. Ettlie and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strategic Management of the Manufacturing Value Chain written by Umit S. Bititci and published by Springer. This book was released on 2013-06-05 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today the Scottish electronics industry employs 40,000 people directly and a further 30,000 in the supply infrastructure. There are now more than 550 electronic manufacturing and supplier companies in ' Silicon Glen'. In terms of the contribution to the economy, electronics is by far the most valuable industry. Its value in 1996 was approximately £ 10billion and accounted for more than half of Scotland's exports. The major product groupings within the industry include: • PCs, laptops and workstations • Disk drives, cable harnessing • Printers, keyboards and peripherals • Semiconductor devices and PCBs • TV, VCRs, CDs, stereos and other consumer electronics • Cellular phones and telecommunications products • A TMs and funds transfer systems • Networking and security systems • Navigation and sonar systems • Microwave products • Power supplies • Software and compilers Many of these companies are multi-national OEMs, who came to Scotland as inward investing companies. Early inward investing companies were from USA, followed by companies from Japan, and more recently from Taiwan and Korea. An important segment of the industry is involved in the manufacture of computers, including IBM, Compaq, Digital and Sun. In fact approximately 40% of the PCs sold in Europe are built in Scotland. With five of the world's top eight computer manufacturers locating a manufacturing base in Scotland there has been an attraction for foreign companies keen to provide service for these multinationals. In 1995/96 the supply base output was worth £1.

Download or read book Flexible Manufacturing Cells and Systems in CIM written by Paul G. Ranky and published by . This book was released on 1990 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook on Scheduling written by Jacek Blazewicz and published by Springer. This book was released on 2019-04-25 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a theoretical and application-oriented analysis of deterministic scheduling problems in advanced planning and computer systems. The text examines scheduling problems across a range of parameters: job priority, release times, due dates, processing times, precedence constraints, resource usage and more, focusing on such topics as computer systems and supply chain management. Discussion includes single and parallel processors, flexible shops and manufacturing systems, and resource-constrained project scheduling. Many applications from industry and service operations management and case studies are described. The handbook will be useful to a broad audience, from researchers to practitioners, graduate and advanced undergraduate students.

Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Tool and Manufacturing Engineers Handbook Desk Edition written by W. H. Cubberly and published by Society of Manufacturing Engineers. This book was released on 1989 with total page 1253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMEH Desk Edition presents a unique collection of manufacturing information in one convenient source. Contains selected information from TMEH Volumes 1-5--over 1,200 pages of manufacturing information. A total of 50 chapters cover topics such as machining, forming, materials, finishing, coating, quality control, assembly, and management. Intended for daily use by engineers, managers, consultants, and technicians, novice engineers or students.

Download or read book Flexible Manufacturing Systems Recent Developments written by A. Raouf and published by Elsevier. This book was released on 1995-02-09 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Manufacturing Systems (FMS) involve substituting machines capable of performing a wide and redefinable variety of tasks for machines dedicated to the performance of specific tasks. FMS can also be programmed to handle new products, thus extending the machines' life cycles. Thus they represent a change from "standardized goods produced by customized machines" to "customized goods produced by standardized machines". This volume contains new and updated material in this field, and will be of great interest to researchers, managers and students concerned with problems related to flexible manufacturing systems.

Download or read book Scheduling Computer and Manufacturing Processes written by Jacek Blazewicz and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a continuation of Scheduling in Computer and Manufacturing Sys tems 1, two editions of which have received kind acceptance of a wide readership. As the previous position, it is the result of a collaborative German-Polish project which has been partially supported by Committee for Scientific Research 2 and DFG. We appreciate this help. We decided to treat this work as a new book rather than the third edition of the previous one due to two important reasons. First of all, the contents has been changed significantly. This concerns not only corrections we have introduced following the suggestions made by many readers (we are very grateful to all of them!) and taking into account our own experience, but first of all this means that important new material has been added. In particular, in the introductory part the ideas of new local search heuristics, i. e. generally applicable global optimization strategies with a simple capability of learning (ejection chains, genetic algo rithms) have been presented. In the framework of parallel processor scheduling, topics of imprecise computations and lot size scheduling have been studied. Further on flow shop and job shop scheduling problems have been studied much more extensively, both from the viewpoint of exact algorithms as well as heuris tics.

Download or read book Proceedings of the 22nd International Conference on Industrial Engineering and Engineering Management 2015 written by Ershi Qi and published by Springer. This book was released on 2016-01-29 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: Being the premier forum for the presentation of new advances and research results in the fields of Industrial Engineering, IEEM 2015 aims to provide a high-level international forum for experts, scholars and entrepreneurs at home and abroad to present the recent advances, new techniques and applications face and face, to promote discussion and interaction among academics, researchers and professionals to promote the developments and applications of the related theories and technologies in universities and enterprises, and to establish business or research relations to find global partners for future collaboration in the field of Industrial Engineering. All the goals of the international conference are to fulfill the mission of the series conference which is to review, exchange, summarize and promote the latest achievements in the field of industrial engineering and engineering management over the past year, and to propose prospects and vision for the further development. This volume is the first of the two proceedings volumes from this conference.

Download or read book Enterprise Growth Strategy written by Dhirendra Kumar and published by CRC Press. This book was released on 2016-05-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even during economic downturns businesses have to grow to survive and compete in domestic and international markets. There is always a need to plan for future growth. Enterprise Growth Strategy presents the total process of a growth strategy. Dr Kumar is an engineer who entered the academic world following a long career in manufacturing business and has since taught almost every aspect of business and management. The 'growth strategy' concept he has developed is comprehensive and manifestly practical. Dr Kumar describes mechanisms by which businesses can gain market share; develop, modify, or upgrade products; acquire new or expand existing businesses; transform resources to increase revenue and profitability; reduce cycle time; and empower business associates. Quality concepts - market growth, financial and core competency - are outlined and a variety of growth strategy tools presented. The relationship between continuous improvement metrics and business growth metrics is explained and their relevance to financial performance examined. Examples and case studies are presented to illustrate how different business areas such as Sales and Marketing; Product Development; Operations; Support Services; and the Finance function, contribute. Leadership responsibilities, employee participation in the execution of growth strategy, culture and change issues are also discussed. Business leaders, managers and consultants, academics and teachers, as well as higher level students on business-related courses will find enormous value in this book. It is unusual, if not unique, in presenting the total process from vision to mission, to development of a growth strategy, implementation of initiatives, use of tools, and measurement of both operational and financial outcomes.

Download or read book Optimal Design of Flexible Manufacturing Systems written by Ulrich A.W. Tetzlaff and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible manufacturing systems are complex production systems with considerable high investment costs. This book intends to show the reader how the design of such a system can be optimized. Thereby it addresses the academic world in management science and industrial engineering as well as system planners in industry. First the design problems are analysed in detail and a planning concept is presented. Afterwards possible tools for the design process are described, as there are: mathematical programming, queueing networks, computer simulation, perturbation analysis, petri nets, group technology, and knowledge based systems. The major part of the book, however, concerns the description of existing optimization models based on mathematical programming. Each model is explained and discussed in detail and for new models, developed by the author, numerical examples are given. Finally some distinct guidelines are presented which help the system planners to select the appropriate model for their planning problems.

Download or read book Job Shop Lean written by Shahrukh A. Irani and published by CRC Press. This book was released on 2020-05-04 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950’s, the design and implementation of the Toyota Production System (TPS) within Toyota had begun. In the 1960’s, Group Technology (GT) and Cellular Manufacturing (CM) were used by Serck Audco Valves, a high-mix low-volume (HMLV) manufacturer in the United Kingdom, to guide enterprise-wide transformation. In 1996, the publication of the book Lean Thinking introduced the entire world to Lean. Job Shop Lean integrates Lean with GT and CM by using the five Principles of Lean to guide its implementation: (1) identify value, (2) map the value stream, (3) create flow, (4) establish pull, and (5) seek perfection. Unfortunately, the tools typically used to implement the Principles of Lean are incapable of solving the three Industrial Engineering problems that HMLV manufacturers face when implementing Lean: (1) finding the product families in a product mix with hundreds of different products, (2) designing a flexible factory layout that "fits" hundreds of different product routings, and (3) scheduling a multi-product multi-machine production system subject to finite capacity constraints. Based on the Author’s 20+ years of learning, teaching, researching, and implementing Job Shop Lean since 1999, this book Describes the concepts, tools, software, implementation methodology, and barriers to successful implementation of Lean in HMLV production systems Utilizes Production Flow Analysis instead of Value Stream Mapping to eliminate waste in different levels of any HMLV manufacturing enterprise Solves the three Industrial Engineering problems that were mentioned earlier using software like PFAST (Production Flow Analysis and Simplification Toolkit), Sgetti and Schedlyzer Explains how the one-at-a-time implementation of manufacturing cells constitutes a long-term strategy for Continuous Improvement Explains how product families and manufacturing cells are the basis for implementing flexible automation, machine monitoring, virtual cells, Manufacturing Execution Systems, and other elements of Industry 4.0 Teaches a new method, Value Network Mapping, to visualize large multi-product multi-machine production systems whose Value Streams share many processes Includes real success stories of Job Shop Lean implementation in a variety of production systems such as a forge shop, a machine shop, a fabrication facility and a shipping department Encourages any HMLV manufacturer planning to implement Job Shop Lean to leverage the co-curricular and extracurricular programs of an Industrial Engineering department

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Handbook of Cellular Manufacturing Systems written by Shahrukh A. Irani and published by John Wiley & Sons. This book was released on 1999-04-15 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular manufacturing (CM) is the grouping of similar products for manufacture in discrete multi-machine cells. It has been proven to yield faster production cycles, lower in-process inventory levels, and enhanced product quality. Pioneered on a large scale by Russian, British, and German manufacturers, interest in CM methods has grown steadily over the past decade. However, there continues to be a dearth of practical guides for industrial engineers and production managers interested in implementing CM techniques in their plants. Bringing together contributions by an international team of CM experts, the Handbook of Cellular Manufacturing Systems bridges this gap in the engineering literature.

Download or read book Flexible Manufacturing Cells and Systems written by William W. Luggen and published by . This book was released on 1991 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory survey of FMS, this applications-oriented text provides a description of automated cells and systems and covers hardware, software, support, service, planning, installation and implementation issues.

Download or read book Proceedings of the 5th International Conference on Flexible Manufacturing Systems written by Keith Rathmill and published by Springer. This book was released on 2013-11-27 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strategic Operations Management written by Steve Brown and published by Routledge. This book was released on 2013 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revitalized new edition of Strategic Operations Management focuses on the four core themes of operations strategy, a vital topic for any company's objectives: strategy, innovation, services, and supply. Expertly authored by a team of Europe's top scholars in the field, the text is enhanced by the addition of new case examples, graphic images, learning objectives, discussion questions, and suggestions for further reading. In addition, the companion website offers a comprehensive set of web links and videos to augment the learning experience. This truly comprehensive volume underscores the differences between the core theories that underpin operations management. Students taking MBA, MSc and MBM classes on operations management, advanced operations management, and strategic operations management will find this textbook fulfills all their requirements whilst advanced undergraduate classes in these areas will also find the book an essential read.