Download or read book Taper Equation and Volume Tables for Plantation grown Red Alder written by Andrew A. Bluhm and published by . This book was released on 2007 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Taper Equation and Volume Tables for Plantation Grown Red Alder written by United States Department of Agriculture and published by CreateSpace. This book was released on 2015-06-26 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: A taper equation and associated tables are presented for red alder (Alnus rubra Bong.) trees grown in plantations. The data were gathered from variable-density experimental plantations throughout the Pacific Northwest. Diameter inside bark along the stem was fitted to a variable exponent model form by using generalized nonlinear least squares and a first-order continuous autoregressive process. A number of parameterizations of the exponent were examined in a preliminary analysis, and the most appropriate form was determined. This was achieved by examining alternative models across geographic locations and silvicultural treatments on the basis of their ability to behave well outside the range of the modeling data by using an independent evaluation data set from across the region and a model validation procedure. Incorporating three easily measured tree variables-diameter at breast height, total tree height, and crown ratio-provided the best fit among location and treatment. This taper equation can be used to estimate diameter inside bark anywhere along the stem, inside bark volume of the entire stem to any top height diameter, and merchantable height and volume between any two points along the stem (i.e., individual log volumes). The flexibility of the model allows for accurate volume predictions across a range of operational stand conditions and management activities and is therefore an improvement over previously published red alder volume and taper equations.
Download or read book Taper Equation and Volume Tables for Plantation grown Red Alder written by Andrew A. Bluhm and published by . This book was released on 2007 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General Technical Report PNW GTR written by and published by . This book was released on 2008 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Volume and Taper Tables for Red Alder written by and published by . This book was released on 1968 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Forestry Chronicle written by and published by . This book was released on 1988 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cubic Volume Tables for Red Alder and Sitka Spruce written by Edgel C. Skinner and published by . This book was released on 1959 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biometry for Forestry and Environmental Data written by Lauri Mehtatalo and published by CRC Press. This book was released on 2020-05-27 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biometry for Forestry and Environmental Data with Examples in R focuses on statistical methods that are widely applicable in forestry and environmental sciences, but it also includes material that is of wider interest. Features: · Describes the theory and applications of selected statistical methods and illustrates their use and basic concepts through examples with forestry and environmental data in R. · Rigorous but easily accessible presentation of the linear, nonlinear, generalized linear and multivariate models, and their mixed-effects counterparts. Chapters on tree size, tree taper, measurement errors, and forest experiments are also included. · Necessary statistical theory about random variables, estimation and prediction is included. The wide applicability of the linear prediction theory is emphasized. · The hands-on examples with implementations using R make it easier for non-statisticians to understand the concepts and apply the methods with their own data. Lot of additional material is available at www.biombook.org. The book is aimed at students and researchers in forestry and environmental studies, but it will also be of interest to statisticians and researchers in other fields as well.
Download or read book Modeling Forest Trees and Stands written by Harold E. Burkhart and published by Springer Science & Business Media. This book was released on 2012-04-27 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing upon a wealth of past research and results, this book provides a comprehensive summary of state-of-the-art methods for empirical modeling of forest trees and stands. It opens by describing methods for quantifying individual trees, progresses to a thorough coverage of whole-stand, size-class and individual-tree approaches for modeling forest stand dynamics, growth and yield, moves on to methods for incorporating response to silvicultural treatments and wood quality characteristics in forest growth and yield models, and concludes with a discussion on evaluating and implementing growth and yield models. Ideal for use in graduate-level forestry courses, this book also provides ready access to a plethora of reference material for researchers working in growth and yield modeling.
Download or read book Bwa Yo written by Joel Timyan and published by . This book was released on 1996 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forest Mensuration written by Anthonie van Laar and published by Springer Science & Business Media. This book was released on 2007-07-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Van Laar and Akça’s popular text book, Forest Mensuration, was first published in 1997. Like that first edition, this modern update is based on extensive research, teaching and practical experience in both Europe, and the tropics and subtropics. However, it has also been extensively revised, and now includes chapters on remote sensing and the application of aerial photographs and satellite imagery. The book assumes no advanced knowledge of statistical methods, and combines practical techniques with important historical and disciplinary context. The result is a strong balance between a handbook and a valuable reference.
Download or read book Growing Plantation Forests written by P. W. West and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the scientific principles that are used throughout the world to ensure the rapid, healthy growth of forest plantations. As the population of the world increases so does the amount of wood people use. Large areas of natural forests are being cleared every year and converted to other uses. Almost as large an area of plantation forests is being established annually to replace those lost natural forests. Eventually, plantations will produce a large proportion of the wood used around the world for firewood, building, the manufacture of paper and bioenergy. Forest plantations can also provide various environmental benefits including carbon storage, rehabilitation of degraded land, serving as disposal sites for various forms of industrial or agricultural waste and enhancing biodiversity in regions that have been largely cleared for agriculture. Whatever their motivation, plantation forest growers want their plantations to be healthy and grow rapidly to achieve their purpose as soon as possible. This book discusses how this is done. It is written for a worldwide audience, from forestry professionals and scientists through to small plantation growers, and describes how plantations may be grown responsibly and profitably.
Download or read book Urban and Community Forestry in the Northeast written by John E. Kuser and published by Springer Science & Business Media. This book was released on 2006-11-14 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a textbook for Urban/Community Forestry courses and a handbook for Shade Tree Commissions, tree wardens, State and National Forestry Services, and professional societies. It is the most complete text in this field because it addresses both culture and management, and the chapters have been written by experts who are active practitioners. The book provides observations and examples relevant to every urban center in the U.S. and elsewhere.
Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book Root Ecology written by Hans de Kroon and published by Springer Science & Business Media. This book was released on 2003-05-21 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the course of evolution, a great variety of root systems have learned to overcome the many physical, biochemical and biological problems brought about by soil. This development has made them a fascinating object of scientific study. This volume gives an overview of how roots have adapted to the soil environment and which roles they play in the soil ecosystem. The text describes the form and function of roots, their temporal and spatial distribution, and their turnover rate in various ecosystems. Subsequently, a physiological background is provided for basic functions, such as carbon acquisition, water and solute movement, and for their responses to three major abiotic stresses, i.e. hard soil structure, drought and flooding. The volume concludes with the interactions of roots with other organisms of the complex soil ecosystem, including symbiosis, competition, and the function of roots as a food source.
Download or read book The Supporting Roots of Trees and Woody Plants Form Function and Physiology written by A. Stokes and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication comprises the proceedings of the first International Conference devoted to the structural roots of trees and woody plants. 'The Supporting Roots - Structure and Function,' 20-24 July 1998, Bordeaux, France. The meeting was held under the auspices ofIUFRO WPS 2. 01. 13 'Root Physiology and Symbiosis,' and its aim was to bring together scientific researchers, foresters and arboriculturalists, to discuss current problems in structural root research and disseminate knowledge to an audience from a wide disciplinary background. For the first time in an international conference, emphasis was placed on presenting recent reseach in the field of tree anchorage mechanics and root biomechanics. The way in which tree stability can be affected by root system symmetry and architecture was addressed, as well as how movement during wind sway can influence the development and shape of woody roots. The role of different nursery and planting techniques was discussed, in relation to effects on root system form and development. Root response to different environmental stresses, including water, temperature, nutrient and mechanical stress was addressed in detail. The structure and function of woody roots was also considered at different levels, from coarse to fine roots, with several papers discussing the interaction between roots and the rhizosphere. One of the conference highlights was the presentation of new methods in root research, by a series of workshops held at LRBB-INRA, Pierroton, on the northern border of the Gascony forest.
Download or read book Forest Analytics with R written by Andrew P. Robinson and published by Springer Science & Business Media. This book was released on 2010-11-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forest Analytics with R combines practical, down-to-earth forestry data analysis and solutions to real forest management challenges with state-of-the-art statistical and data-handling functionality. The authors adopt a problem-driven approach, in which statistical and mathematical tools are introduced in the context of the forestry problem that they can help to resolve. All the tools are introduced in the context of real forestry datasets, which provide compelling examples of practical applications. The modeling challenges covered within the book include imputation and interpolation for spatial data, fitting probability density functions to tree measurement data using maximum likelihood, fitting allometric functions using both linear and non-linear least-squares regression, and fitting growth models using both linear and non-linear mixed-effects modeling. The coverage also includes deploying and using forest growth models written in compiled languages, analysis of natural resources and forestry inventory data, and forest estate planning and optimization using linear programming. The book would be ideal for a one-semester class in forest biometrics or applied statistics for natural resources management. The text assumes no programming background, some introductory statistics, and very basic applied mathematics.
