Download or read book Tall Building Design written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-10-04 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the Question Frequently Proposed to the Designer by Architects: "Can We Do This? Offering guidance on how to use code-based procedures while at the same time providing an understanding of why provisions are necessary, Tall Building Design: Steel, Concrete, and Composite Systems methodically explores the structural behavior of steel, concrete, and composite members and systems. This text establishes the notion that design is a creative process, and not just an execution of framing proposals. It cultivates imaginative approaches by presenting examples specifically related to essential building codes and standards. Tying together precision and accuracy—it also bridges the gap between two design approaches—one based on initiative skill and the other based on computer skill. The book explains loads and load combinations typically used in building design, explores methods for determining design wind loads using the provisions of ASCE 7-10, and examines wind tunnel procedures. It defines conceptual seismic design, as the avoidance or minimization of problems created by the effects of seismic excitation. It introduces the concept of performance-based design (PBD). It also addresses serviceability considerations, prediction of tall building motions, damping devices, seismic isolation, blast-resistant design, and progressive collapse. The final chapters explain gravity and lateral systems for steel, concrete, and composite buildings. The Book Also Considers: Preliminary analysis and design techniques The structural rehabilitation of seismically vulnerable steel and concrete buildings Design differences between code-sponsored approaches The concept of ductility trade-off for strength Tall Building Design: Steel, Concrete, and Composite Systems is a structural design guide and reference for practicing engineers and educators, as well as recent graduates entering the structural engineering profession. This text examines all major concrete, steel, and composite building systems, and uses the most up-to-date building codes.
Download or read book Tall Buildings written by Nigel Clark and published by Riba Publishing. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly reworked to reflect industry developments and experiences gained over the last ten years, this second edition imparts the advice and knowledge of more than 20 highly respected industry specialists.
Download or read book Designing Tall Buildings written by Mark Sarkisian and published by Routledge. This book was released on 2012-03-22 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of its kind, Designing Tall Buildings is an accessible reference that guides you through the fundamental principles of designing high-rises. Each chapter focuses on one theme central to tall-building design, giving you a comprehensive overview of the related architecture and structural engineering concepts. Mark P. Sarkisian provides clear definitions of technical terms and introduces important equations, to help you gradually develop your knowledge. Later chapters allow you to explore more complex applications, such as biomimicry. Projects drawn from Skidmore, Owings and Merrill’s vast catalog of built high-rises, many of which Sarkisian designed, demonstrate these concepts. This book advises you to consider the influence of a particular site’s geology, wind conditions, and seismicity. Using this contextual knowledge and analysis, you can determine what types of structural solutions are best suited for a tower on that site. You can then conceptualize and devise efficient structural systems that are not only safe, but also constructible and economical. Sarkisian also addresses the influence of nature in design, urging you to integrate structure and architecture for buildings of superior performance, sustainability, and aesthetic excellence.
Download or read book The Sustainable Tall Building written by Philip Oldfield and published by Routledge. This book was released on 2019-03-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sustainable Tall Building: A Design Primer is an accessible and highly illustrated guide, which primes those involved in the design and research of tall buildings to dramatically improve their performance. Using a mixture of original research and analysis, best-practice design thinking and a detailed look at exemplar case studies, author Philip Oldfield takes the reader through the architectural ideas, engineering strategies and cutting-edge technologies that are available to the tall building design team. The book takes a global perspective, examining high-rise design in different climates, cultures and contexts. It considers common functions such as high-rise housing and offices, to more radical designs such as vertical farming and vertical cemeteries. Innovation is provided by examining not only the environmental performance of tall buildings but also their social sustainability, guiding the reader through strategies to create successful communities at height. The book starts by critically appraising the sustainability of tall building architecture past and present, before demonstrating innovative ways for future tall buildings to be designed. These include themes such as climatically responsive architecture, siting a tall building in the city, zero-carbon towers, skygardens and community spaces at height, sustainable structural systems and novel façades. In doing so, the book provides essential reading for architects, engineers, consultants, developers, researchers and students engaged with sustainable design and high-rise architecture.
Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t
Download or read book Structural Analysis and Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-04-19 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software skills rise to the forefront of design concerns, the art of structural conceptualization is often minimized. Structural engineering, however, requires the marriage of artistic and intuitive designs with mathematical accuracy and detail. Computer analysis works to solidify and extend the creative idea or concept that might have started o
Download or read book Tall Building Structures written by Bryan Stafford Smith and published by Wiley-Interscience. This book was released on 1991-07-17 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines structural aspects of high rise buildings, particularly fundamental approaches to the analysis of the behavior of different forms of building structures including frame, shear wall, tubular, core and outrigger-braced systems. Introductory chapters discuss the forces to which the structure is subjected, design criteria which are of the greatest relevance to tall buildings, and various structural forms which have developed over the years since the first skyscrapers were built at the turn of the century. A major chapter is devoted to the modeling of real structures for both preliminary and final analyses. Considerable attention is devoted to the assessment of the stability of the structure, and the significance of creep and shrinkage is discussed. A final chapter is devoted to the dynamic response of structures subjected to wind and earthquake forces. Includes both accurate computer-based and approximate methods of analysis.
Download or read book The Tall Buildings Reference Book written by David Parker and published by Routledge. This book was released on 2013-04-12 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the ever-changing skylines of cities all over the world show, tall buildings are an increasingly important solution to accommodating growth more sustainably in today’s urban areas. Whether it is residential, a workplace or mixed use, the tower is both a statement of intent and the defining image for the new global city. The Tall Buildings Reference Book addresses all the issues of building tall, from the procurement stage through the design and construction process to new technologies and the building’s contribution to the urban habitat. A case study section highlights the latest, the most innovative, the greenest and the most inspirational tall buildings being constructed today. A team of over fifty experts in all aspects of building tall have contributed to the making of the Tall Buildings Reference Book, creating an unparalleled source of information and inspiration for architects, engineers and developers.
Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.
Download or read book Architecture of Tall Buildings written by Mir M. Ali and published by McGraw-Hill Companies. This book was released on 1995 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Tall Buildings written by Kheir Al-Kodmany and published by Routledge. This book was released on 2017-02-17 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the rapid pace of tall building construction has fostered a certain kind of placelessness, with many new tall buildings being built out of scale, context and place. By analyzing hundreds of tall buildings and by providing hundreds of visuals that inspire, stimulate and engage, Understanding Tall Buildings contends that well-designed tall buildings can rejuvenate cities, ignite economic activity, support social life and boost city pride. Although this book does not claim to possess all the solutions, it does propose specific tall building design guidelines that may help to promote placemaking. Through this work, it is the author’s hope that ill-conceived developments will become less common in the future and that good placemaking will become the norm, not the exception. This book is a must-read for students and practitioners working to create better tall buildings and better urban environments.
Download or read book Tall written by Guy Marriage and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide to both the basics and the details of tall building design, delving into the rudimentary aspects of design that an architect of a tall office building must consider, as well as looking at the rationale for why and how a building must be built the way it is. Liberally illustrated with clear, simple black and white illustrations showing how the building structure and details can be built, this book greatly assists the reader in their understanding of the building process for a modern office tower. It breaks down the building into three main components: the structure, the core and the facade, writing about them and illustrating them in a simple-to-understand manner. By focusing on the nuts and bolts of real-life design and construction, it provides a practical guide and desk-reference to any architect or architecture student embarking on a tall building project.
Download or read book Design and Performance of Tall Buildings for Wind written by Preetam Biswas and published by . This book was released on 2020 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Performance of Tall Buildings for Wind, MOP 143, provides a framework for the design of tall buildings for wind, based on the current state-of-practice in tall building structural design and wind tunnel testing.
Download or read book Design and Analysis of Tall and Complex Structures written by Feng Fu and published by Butterworth-Heinemann. This book was released on 2018-02-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures. This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures. Numerous worked-through examples of existing prestigious projects around the world (such as Jeddah Tower, Shanghai Tower, and Petronas Tower etc.) are provided to assist the reader’s understanding of the topics. • Provides the latest modelling methods in design such as BIM and Parametric Modelling technique. • Detailed explanations of widely used programs in current design practice, such as SAP2000, ETABS, ANSYS, and Rhino. • Modelling case studies for all types of tall buildings and complex structures, such as: Buttressed Core system, diagrid system, Tube system, Tensile structures and offshore structures etc.
Download or read book Tall Buildings written by Mehmet Halis Günel and published by Routledge. This book was released on 2014-06-27 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural challenges of building 800 metres into the sky are substantial, and include several factors which do not affect low-rise construction. This book focusses on these areas specifically to provide the architectural and structural knowledge which must be taken into account in order to design tall buildings successfully. In presenting examples of steel, reinforced concrete, and composite structural systems for such buildings, it is shown that wind load has a very important effect on the architectural and structural design. The aerodynamic approach to tall buildings is considered in this context, as is earthquake induced lateral loading. Case studies of some of the world’s most iconic buildings, illustrated with full colour photographs, structural plans and axonometrics, will bring to life the design challenges which they presented to architects and structural engineers. The Empire State Building, the Burj Khalifa, Taipei 101 and the HSB Turning Torso are just a few examples of the buildings whose real-life specifications are used to explain and illustrate core design principles, and their subsequent effect on the finished structure.
Download or read book Outrigger Design for High Rise Buildings written by Hi Sun Choi and published by Routledge. This book was released on 2017-09-19 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outrigger systems are rigid horizontal structures designed to improve a building’s stability and strength by connecting the building core or spine to distant columns, much in the way an outrigger can prevent a canoe from overturning. Outriggers have been used in tall, narrow buildings for nearly 500 years, but the basic design principle dates back centuries. In the 1980s, as buildings grew taller and more ambitious, outrigger systems eclipsed tubular frames as the most popular structural approach for supertall buildings. Designers embraced properly proportioned core-and-outrigger schemes as a method to offer far more perimeter flexibility and openness for tall buildings than the perimeter moment or braced frames and bundled tubes that preceded them. However, the outrigger system is not listed as a seismic lateral load-resisting system in any code, and design parameters are not available, despite the increasingly frequent use of the concept. The Council on Tall Buildings and Urban Habitat’s Outrigger Working Group has addressed the pressing need for design guidelines for outrigger systems with this guide, a comprehensive overview of the use of outriggers in skyscrapers. This guide offers detailed recommendations for analysis of outriggers within the lateral load-resisting systems of tall buildings, for recognizing and addressing effects on building behavior and for practical design solutions. It also highlights concerns specific to the outrigger structural system such as differential column shortening and construction sequence impacts. Several project examples are explored in depth, illustrating the role of outrigger systems in tall building designs and providing ideas for future projects. The guide details the impact of outrigger systems on tall building designs, and demonstrates ways in which the technology is continuously advancing to improve the efficiency and stability of tall buildings around the world.
Download or read book The Future of the City written by Kheir Al-Kodmany and published by WIT Press. This book was released on 2013 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the experience of several cities from different parts of the world, this text provides a global perspective on the urbanization phenomenon and tall building development, and examines their underlying logic, design drivers, contextual relationships and pitfalls.
