Download or read book Tailored Systems Architecture for Design of Space Science and Technology Missions Using DoDAF V2 0 written by and published by . This book was released on 2009 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of systems architecture, following a set of integrated descriptions from an architecture framework, has been well codified in Department of Defense acquisition and systems engineering. However, in the Space Science and Technology (S & T) community, this guidance and practice is not commonly adopted. This paper outlines an approach to leverage the changes made in DoD Architecture Framework 2.0 (DoDAF2.0), and the renewed emphasis on data and support to acquisition decision analysis. After decomposing the Space S & T design lifecycle into phases, design milestones and activities using process models, a set of DoDAF prescribed and Fit-for-Purpose views are constructed into a reference implementation of a system architecture. This approach attempts to make DoDAF2.0 more relevant and integrated with S & T missions and the decisions that are encountered.
Download or read book Tailored Systems Architecture for Design of Space Science and Technology Missions Using DoDAF2 0 written by Nicholas J. Merski and published by . This book was released on 2009 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MITRE Systems Engineering Guide written by and published by . This book was released on 2012-06-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Just Enough Software Architecture written by George Fairbanks and published by Marshall & Brainerd. This book was released on 2010-08-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical guide for software developers, and different than other software architecture books. Here's why: It teaches risk-driven architecting. There is no need for meticulous designs when risks are small, nor any excuse for sloppy designs when risks threaten your success. This book describes a way to do just enough architecture. It avoids the one-size-fits-all process tar pit with advice on how to tune your design effort based on the risks you face. It democratizes architecture. This book seeks to make architecture relevant to all software developers. Developers need to understand how to use constraints as guiderails that ensure desired outcomes, and how seemingly small changes can affect a system's properties. It cultivates declarative knowledge. There is a difference between being able to hit a ball and knowing why you are able to hit it, what psychologists refer to as procedural knowledge versus declarative knowledge. This book will make you more aware of what you have been doing and provide names for the concepts. It emphasizes the engineering. This book focuses on the technical parts of software development and what developers do to ensure the system works not job titles or processes. It shows you how to build models and analyze architectures so that you can make principled design tradeoffs. It describes the techniques software designers use to reason about medium to large sized problems and points out where you can learn specialized techniques in more detail. It provides practical advice. Software design decisions influence the architecture and vice versa. The approach in this book embraces drill-down/pop-up behavior by describing models that have various levels of abstraction, from architecture to data structure design.
Download or read book INCOSE Systems Engineering Handbook written by INCOSE and published by John Wiley & Sons. This book was released on 2015-06-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed and thorough reference on the discipline and practice of systems engineering The objective of the International Council on Systems Engineering (INCOSE) Systems Engineering Handbook is to describe key process activities performed by systems engineers and other engineering professionals throughout the life cycle of a system. The book covers a wide range of fundamental system concepts that broaden the thinking of the systems engineering practitioner, such as system thinking, system science, life cycle management, specialty engineering, system of systems, and agile and iterative methods. This book also defines the discipline and practice of systems engineering for students and practicing professionals alike, providing an authoritative reference that is acknowledged worldwide. The latest edition of the INCOSE Systems Engineering Handbook: Is consistent with ISO/IEC/IEEE 15288:2015 Systems and software engineering—System life cycle processes and the Guide to the Systems Engineering Body of Knowledge (SEBoK) Has been updated to include the latest concepts of the INCOSE working groups Is the body of knowledge for the INCOSE Certification Process This book is ideal for any engineering professional who has an interest in or needs to apply systems engineering practices. This includes the experienced systems engineer who needs a convenient reference, a product engineer or engineer in another discipline who needs to perform systems engineering, a new systems engineer, or anyone interested in learning more about systems engineering.
Download or read book Designing Unmanned Systems with Greater Autonomy written by Daniel Gonzales and published by Rand Corporation. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many current unmanned systems (UxSs) employ different communication systems and have limited autonomy, which limit information sharing with warfighters and other UxSs. This report identifies ways to address these limitations.
Download or read book Documenting Software Architectures written by Paul Clements and published by Pearson Education. This book was released on 2010-10-05 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software architecture—the conceptual glue that holds every phase of a project together for its many stakeholders—is widely recognized as a critical element in modern software development. Practitioners have increasingly discovered that close attention to a software system’s architecture pays valuable dividends. Without an architecture that is appropriate for the problem being solved, a project will stumble along or, most likely, fail. Even with a superb architecture, if that architecture is not well understood or well communicated the project is unlikely to succeed. Documenting Software Architectures, Second Edition, provides the most complete and current guidance, independent of language or notation, on how to capture an architecture in a commonly understandable form. Drawing on their extensive experience, the authors first help you decide what information to document, and then, with guidelines and examples (in various notations, including UML), show you how to express an architecture so that others can successfully build, use, and maintain a system from it. The book features rules for sound documentation, the goals and strategies of documentation, architectural views and styles, documentation for software interfaces and software behavior, and templates for capturing and organizing information to generate a coherent package. New and improved in this second edition: Coverage of architectural styles such as service-oriented architectures, multi-tier architectures, and data models Guidance for documentation in an Agile development environment Deeper treatment of documentation of rationale, reflecting best industrial practices Improved templates, reflecting years of use and feedback, and more documentation layout options A new, comprehensive example (available online), featuring documentation of a Web-based service-oriented system Reference guides for three important architecture documentation languages: UML, AADL, and SySML
Download or read book Disciplinary Convergence in Systems Engineering Research written by Azad M. Madni and published by Springer. This book was released on 2017-11-24 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of this volume on systems engineering research is disciplinary convergence: bringing together concepts, thinking, approaches, and technologies from diverse disciplines to solve complex problems. Papers presented at the Conference on Systems Engineering Research (CSER), March 23-25, 2017 at Redondo Beach, CA, are included in this volume. This collection provides researchers in academia, industry, and government forward-looking research from across the globe, written by renowned academic, industry and government researchers.
Download or read book Enterprise Architecture A to Z written by Daniel Minoli and published by CRC Press. This book was released on 2008-06-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise Architecture A to Z examines cost-saving trends in architecture planning, administration, and management. The text begins by evaluating the role of Enterprise Architecture planning and Service-Oriented Architecture (SOA) modeling. It provides an extensive review of the most widely-deployed architecture framework models, including The Open Group Architecture and Zachman Architectural Frameworks, as well as formal architecture standards. The first part of the text focuses on the upper layers of the architecture framework, while the second part focuses on the technology architecture. Additional coverage discusses Ethernet, WAN, Internet communication technologies, broadband, and chargeback models.
Download or read book Enterprise Architecture for Integration written by Clive Finkelstein and published by Artech House Publishers. This book was released on 2006-01-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The enterprise architecture methods of enterprise engineering as described in this book enable business experts and IT experts together to identify reusable business activities, processes and integrated databases. Three main sections cover enterprise architecture for managers, methodology, and integration technologies.
Download or read book Design of Enterprise Systems written by Ronald Giachetti and published by CRC Press. This book was released on 2016-04-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: In practice, many different people with backgrounds in many different disciplines contribute to the design of an enterprise. Anyone who makes decisions to change the current enterprise to achieve some preferred structure is considered a designer. What is problematic is how to use the knowledge of separate aspects of the enterprise to achieve a globally optimized enterprise. The synthesis of knowledge from many disciplines to design an enterprise defines the field of enterprise engineering. Because enterprise systems are exceedingly complex, encompassing many independent domains of study, students must first be taught how to think about enterprise systems. Specifically written for advanced and intermediate courses and modules, Design of Enterprise Systems: Theory, Architecture, and Methods takes a system-theoretical perspective of the enterprise. It describes a systematic approach, called the enterprise design method, to design the enterprise. The design method demonstrates the principles, models, methods, and tools needed to design enterprise systems. The author uses the enterprise system design methodology to organize the chapters to mimic the completion of an actual project. Thus, the book details the enterprise engineering process from initial conceptualization of an enterprise to its final design. Pedagogical tools available include: For instructors: PowerPoint® slides for each chapter Project case studies that can be assigned as long-term projects to accompany the text Quiz questions for each chapter Business Process Analyzer software available for download For students: Templates, checklists, forms, and models to support enterprise engineering activities The book fills a need for greater design content in engineering curricula by describing how to design enterprise systems. Inclusion of design is also critical for business students, since they must realize the import their decisions may have on the long-term design of the enterprises they work with. The book’s practical focus and project-based approach coupled with the pedagogical tools gives students the knowledge and skills they need to lead enterprise engineering projects.
Download or read book Intelligent Adaptive Systems written by Ming Hou and published by CRC Press. This book was released on 2014-12-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: As ubiquitous as the atmosphere, intelligent adaptive systems (IASs) surround us in our daily lives. When designed well, these systems sense users and their environments so that they can provide support in a manner that is not only responsive to the evolving situation, but unnoticed by the user. A synthesis of recent research and developments on IASs from the human factors (HF) and human–computer interaction (HCI) domains, Intelligent Adaptive Systems: An Interaction-Centered Design Perspective provides integrated design guidance and recommendations for researchers and system developers. The book explores a recognized lack of integration between the HF and HCI research communities, which has led to inconsistencies between the research approaches adopted, and a lack of exploitation of research from one field by the other. The authors integrate theories and methodologies from these domains to provide design recommendations for human–machine developers. They then establish design guidance through the review of conceptual frameworks, analytical methodologies, and design processes for intelligent adaptive systems. The book draws on case studies from the military, medical, and distance learning domains to illustrate intelligent system design to examine lessons learned. Outlining an interaction-centered perspective for designing an IAS, the book details methodologies for understanding human work in complex environments and offers understanding about why and how optimizing human–machine interaction should be central to the design of IASs. The authors present an analytical and design methodology as well as an implementation strategy that helps you choose the proper design framework for your needs.
Download or read book Cloud Computing for Enterprise Architectures written by Zaigham Mahmood and published by Springer Science & Business Media. This book was released on 2011-12-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important text provides a single point of reference for state-of-the-art cloud computing design and implementation techniques. The book examines cloud computing from the perspective of enterprise architecture, asking the question; how do we realize new business potential with our existing enterprises? Topics and features: with a Foreword by Thomas Erl; contains contributions from an international selection of preeminent experts; presents the state-of-the-art in enterprise architecture approaches with respect to cloud computing models, frameworks, technologies, and applications; discusses potential research directions, and technologies to facilitate the realization of emerging business models through enterprise architecture approaches; provides relevant theoretical frameworks, and the latest empirical research findings.
Download or read book Enterprise Architecture at Work written by Marc Lankhorst and published by Springer Science & Business Media. This book was released on 2012-08-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: An enterprise architecture tries to describe and control an organisation’s structure, processes, applications, systems and techniques in an integrated way. The unambiguous specification and description of components and their relationships in such an architecture requires a coherent architecture modelling language. Lankhorst and his co‐authors present such an enterprise modelling language that captures the complexity of architectural domains and their relations and allows the construction of integrated enterprise architecture models. They provide architects with concrete instruments that improve their architectural practice. As this is not enough, they additionally present techniques and heuristics for communicating with all relevant stakeholders about these architectures. Since an architecture model is useful not only for providing insight into the current or future situation but can also be used to evaluate the transition from ‘as‐is’ to ‘to‐be’, the authors also describe analysis methods for assessing both the qualitative impact of changes to an architecture and the quantitative aspects of architectures, such as performance and cost issues. The modelling language presented has been proven in practice in many real‐life case studies and has been adopted by The Open Group as an international standard. So this book is an ideal companion for enterprise IT or business architects in industry as well as for computer or management science students studying the field of enterprise architecture.
Download or read book DoD Architecture Framework 2 0 written by Steven H. Dam and published by CreateSpace. This book was released on 2015-01-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: DoD Architecture Framework 2.0: A Guide to Applying System Engineering to Develop Integrated, Executable Architectures is designed to establish a clear understanding of the DoDAF and its purpose, and advance the readers' skills in applying systems engineering to the DoDAF. Readers will understand what tools, processes, and techniques make a good methodology. The author divided the book into two section to give particular attention to both Theory and Practical Application. The Practical Application section of the book will allow readers to take their knowledge of the DoDAF and develop their ability to execute architectures.
Download or read book Nasa Systems Engineering Handbook Nasa Sp 2016 6105 Rev2 written by National Aeronautics and Space Administration and published by Createspace Independent Publishing Platform. This book was released on 2017-11-03 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook, "NASA Systems Engineering Handbook," is intended to provide general guidance and information on systems engineering that will be useful to the NASA community. It provides a generic description of Systems Engineering (SE) as it should be applied throughout NASA. A goal of the handbook is to increase awareness and consis¬tency across the Agency and advance the practice of SE. This handbook provides perspectives relevant to NASA and data particular to NASA. This handbook describes systems engineering best practices that should be incorporated in the development and implementation of large and small NASA programs and projects. The engineering of NASA systems requires a systematic and disciplined set of processes that are applied recursively and iteratively for the design, development, operation, maintenance, and closeout of systems throughout the life cycle of the programs and projects. The scope of this handbook includes systems engineering functions regardless of whether they are performed by a manager or an engineer, in-house or by a contractor.
Download or read book Systems of Systems Perspectives and Applications written by Tien M. Nguyen and published by BoD – Books on Demand. This book was released on 2021-07-07 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This professional technical book presents complex topics on System-of-System (SoS) and Systems-of-Systems (SOS) engineering, SOS enterprise architecture (SOSEA) design and analysis, and implementation of SOSEA framework along with the modeling, simulation and analysis (MS&A) models in MATLAB. In addition, the book also extends the use of SOS perspectives for the development of computer simulation models for complex processes, systems, decision support systems, and game-theoretic models. This book is intended for two reader categories; namely, a primary and secondary category. The primary category includes system engineers, SOS architects, and mathematicians. The secondary category includes scientists and researchers in space/airborne systems, wireless communications, medicine, and mathematics, who would benefit from several chapters that contain open problems and technical relevance.
