Download or read book Tables of Neutron Resonance Parameters written by S. Sukhoruchin and published by Springer. This book was released on 1998-06-05 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The neutron as one of the basic building blocks of matter plays a major role in both fundamental physics and applications. Volume I/16 presents an up-to-date collection of neutron data for neutron energies up to 20 MeV, with emphasis on energies in the keV range or below. Subvolume I/16B is a compilation of all known neutron resonance parameters of nuclei. The amount of data is so large that only the most important and recent data for each isotope are printed in the book, while on the accompanying CD-ROM the complete sets of resonance parameter, also those for higher energies, can be found for each isotope.
Download or read book Table of Neutron Resonance Constants written by Bernard Taub Feld and published by . This book was released on 1953 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neutron Resonance Parameters written by Sergey I Sukhoruchkin and published by Springer. This book was released on 2015-01-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume I/26A is presenting newly published neutron resonance parameters for nuclei ranging from Hydrogen (Z=1) to Californium (Z=98) supplementing data published in previous Landolt-Börnstein volumes. The quality and precision of the data have been improved considerably. The data were compiled by two eminent experts in the field who undertook great efforts to compare data from different laboratories to present "best values". Accurate neutron resonance parameters embody an important contribution to improve nuclear data for a variety of applications such as the design and safe operation of nuclear reactors, the development of advanced energy production technologies, transmutation of nuclear waste, and nuclear astrophysics. Additionally, one chapter is dedicated to the characterization of materials and objects by neutron resonance spectroscopy. Transmission and capture analysis using time-of-flight measurements are described in detail. Applications ranging from archeology, astrophysics, investigation of nuclear material, thermometry or resonance imaging for the study of molten nuclear fuel are presented. Another chapter presents empirical evidence for regularities in the systematics of level spacing. In view of the large amount of data the parameters for only the most important resonances are given in the printed version, whereas the data for all resonances are available online on www.springermaterials.com. Neutron resonance parameters of many nuclei were previously published by Landolt-Börnstein in Volumes I/16B, I/16C, and I/24.
Download or read book Atlas of Neutron Resonances written by Said F. Mughabghab and published by Elsevier. This book was released on 2018-02-09 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atlas of Neutron Resonances: Resonance Properties and Thermal Cross Sections Z=61-102, Sixth Edition, contains an extensive list of detailed individual neutron resonance parameters for Z=61-102, thermal cross sections, capture and fission resonance integrals, average resonance parameters, and a short survey of the physics of thermal and resonance neutrons. The long introduction contains: nuclear physics formulas aimed at neutron physicists; topics of special interest such as valence neutron capture, nuclear level density parameters, and s-, p-, and d-wave neutron strength functions; and various comparisons of measured quantities with the predictions of nuclear models, such as the optical model neutron-induced fission. As in the last edition, additional features have been added to appeal to a wider spectrum of users. These include: spin-dependent scattering lengths that are of interest to solid-state physicists, nuclear physicists and neutron evaluators; calculated and measured Maxwellian average 5-keV and 30-keV capture cross sections of importance to astrophysicists involved in nucleosynthesis modeling; s-, p-, and d- wave average radiative widths; nuclear level density parameters; and average fission widths derived from average fission cross sections. Provides a comparison of average resonance parameters with optical model calculations and with the generalized Landau-Fermi model Presents scattering radii for various partial waves from the analysis of total neutron cross sections in the keV to MeV energy region Includes a brief review of sub-threshold fission Features consistent treatment of average neutron parameters with values from the resolved resonance region
Download or read book Atlas of Neutron Resonances written by Said F. Mughabghab and published by Elsevier. This book was released on 2018-02-09 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atlas of Neutron Resonances: Resonance Properties and Thermal Cross Sections Z= 1-60, Sixth Edition, contains an extensive list of detailed individual neutron resonance parameters for Z=1-60, as well as thermal cross sections, capture resonance integrals, average resonance parameters and a short survey of the physics of thermal and resonance neutrons. The long introduction contains: nuclear physics formulas aimed at neutron physicists; topics of special interest such as valence neutron capture, nuclear level density parameters, and s-, p-, and d-wave neutron strength functions; and various comparisons of measured quantities with the predictions of nuclear models, such as the optical model. As in the last edition, additional features have been added to appeal to a wider spectrum of users. These include: spin-dependent scattering lengths that are of interest to solid-state physicists, nuclear physicists and neutron evaluators; calculated and measured Maxwellian average 5-keV and 30-keV capture cross sections of importance to astrophysicists involved in nucleosynthesis modeling; s-, p-, and d-wave average radiative widths; and, nuclear level density parameters. Provides a comparison of average resonance parameters with optical model calculations and with the generalized Landau-Fermi model Presents scattering radii for various partial waves from the analysis of total neutron cross sections in the keV to MeV energy region Includes a brief review of sub-threshold fission Examines consistent treatment of average neutron parameters with values from the resolved resonance region
Download or read book Neutron Resonance Parameters and Thermal Cross Sections written by Said F. Maghabghab and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tables of Neutron Resonance Parameters and Multigroup Cross Sections for Pd 105 Nd 143 Sm 149 Sm 151 1979 Evaluation written by M. Vaccari and published by . This book was released on 1980 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tables of Neutron Resonance Data and Parameters for 63 Fission Products Evaluated and Compiled at the Bologna Centre 1977 written by A. Montaguti and published by . This book was released on 1978 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Ion Radiotherapy written by Hirohiko Tsujii and published by Springer Science & Business Media. This book was released on 2013-12-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a practical guide for the use of carbon ions in cancer radiotherapy. On the basis of clinical experience with more than 7,000 patients with various types of tumors treated over a period of nearly 20 years at the National Institute of Radiological Sciences, step-by-step procedures and technological development of this modality are highlighted. The book is divided into two sections, the first covering the underlying principles of physics and biology, and the second section is a systematic review by tumor site, concentrating on the role of therapeutic techniques and the pitfalls in treatment planning. Readers will learn of the superior outcomes obtained with carbon-ion therapy for various types of tumors in terms of local control and toxicities. It is essential to understand that the carbon-ion beam is like a two-edged sword: unless it is used properly, it can increase the risk of severe injury to critical organs. In early series of dose-escalation studies, some patients experienced serious adverse effects such as skin ulcers, pneumonitis, intestinal ulcers, and bone necrosis, for which salvage surgery or hospitalization was required. To preclude such detrimental results, the adequacy of therapeutic techniques and dose fractionations was carefully examined in each case. In this way, significant improvements in treatment results have been achieved and major toxicities are no longer observed. With that knowledge, experts in relevant fields expand upon techniques for treatment delivery at each anatomical site, covering indications and optimal treatment planning. With its practical focus, this book will benefit radiation oncologists, medical physicists, medical dosimetrists, radiation therapists, and senior nurses whose work involves radiation therapy, as well as medical oncologists and others who are interested in radiation therapy.
Download or read book German books in print written by and published by . This book was released on 2002 with total page 1474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Neutron Optics written by Masahiko Utsuro and published by John Wiley & Sons. This book was released on 2010-01-12 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by authors with an international reputation, acknowledged expertise and teaching experience, this is the most up-to-date resource on the field. The text is clearly structured throughout so as to be readily accessible, and begins by looking at scattering of a scalar particle by one-dimensional systems. The second section deals with the scattering of neutrons with spin in one-dimensional potentials, while the third treats dynamical diffraction in three-dimensional periodic media. The final two sections conclude with incoherent and small angle scattering, and some problems of quantum mechanics. With its treatment of the theories, experiments and applications involved in neutron optics, this relevant reading for nuclear physicists and materials scientists alike.
Download or read book Accuracy Requirements and Uncertainties in Radiotherapy written by International Atomic Energy Agency and published by . This book was released on 2017-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accuracy requirements in radiation oncology have been defined in multiple publications; however, these have been based on differing radiation technologies. In the meantime, the uncertainties in radiation dosimetry reference standards have been reduced and more detailed patient outcome data are available. No comprehensive literature on accuracy and uncertainties in radiotherapy has been published so far. The IAEA has therefore developed a new international consensus document on accuracy requirements and uncertainties in radiation therapy, to promote safer and more effective patient treatments. This publication addresses accuracy and uncertainty issues related to the vast majority of radiotherapy departments including both external beam radiotherapy and brachytherapy. It covers clinical, radiobiological, dosimetric, technical and physical aspects.
Download or read book Handbook of Nuclear Engineering written by Dan Gabriel Cacuci and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 3701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an authoritative compilation of information regarding methods and data used in all phases of nuclear engineering. Addressing nuclear engineers and scientists at all levels, this book provides a condensed reference on nuclear engineering since 1958.
Download or read book Nuclear Data for Science and Technology written by Syed M. Qaim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the Proceedings of the International Conference on Nuclear Data for Science and Technology held at Jillich in May 1991. The conference was in a series of application oriented nuclear data conferences organized in the past under the auspices of the Nuclear Energy Agency-Nuclear Data Committee (NEANDC) and with the support of the Nuclear Energy Agency-Committee on Reactor Physics (NEACRP). It was the fIrst international conference on nuclear data held in Germany, with the scientific responsibility entrusted to the Institute of Nuclear Chemistry of the Research Centre Jillich. The scientific programme was established by the International Programme Committee in consultation with the International Advisers, and the NEA and IAEA cooperated in the organization. A total of 328 persons from 37 countries and fIve international organizations participated. The scope of these Proceedings extends to a wide range of interdisciplinary topics dealing with measu rement, calculation, evaluation and application of nuclear data, with a major emphasis on numerical data. Both energy and non-energy related applications are considered and due attention is given to some fundamental aspects relevant to the understanding of nuclear data.
Download or read book Radiation Oncology A Physicist s Eye View written by Michael Goitein and published by Springer Science & Business Media. This book was released on 2007-08-14 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected in this hugely useful volume cover the principle physical and biological aspects of radiation therapy and in addition, address practical clinical considerations in the planning and delivering of that therapy. The importance of the assessment of uncertainties is emphasized. Topics include an overview of the physics of the interactions of radiation with matter and the definition of the goals and the design of radiation therapy approaches.
Download or read book Silicon written by Paul Siffert and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: With topics ranging from epitaxy through lattice defects and doping to quantum computation, this book provides a personalized survey of the development and use of silicon, the basis for the revolutionary changes in our lives sometimes called "The Silicon Age." Beginning with the very first developments more than 50 years ago, this reports on all aspects of silicon and silicon technology up to its use in exciting new technologies, including a glance at possible future developments.
Download or read book Physics in Food Manufacturing written by Megan Povey and published by . This book was released on 2020-06-12 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first authoritative text on the role that physicists play in solving the inherently multidisciplinary science and technology challenges in food manufacturing. Topics range from designing safe, nutritious and great-tasting foods to the process technology and manufacturing know-how needed to deliver compelling product innovation. The book provides a foundational resource for the transformation of engineering and materials characterisation in the food and pharmaceuticals industries. It is an essential reference for interdisciplinary physical scientists, food/nutrition scientists and engineers working in academic research, government labs and industry, and it is also a valuable resource for R&D staff and product engineers working for suppliers of specialist instrumentation and equipment to the food processing industry. The book is augmented by complementary presentations from the Fourth IOP Physics in Food Manufacturing Conference 2020, held in Leeds, UK. Key Features The first authoritative account of the diverse role that physics and physicists play in the food processing industry. A go-to reference source for anyone wishing to become involved in food processing - science, technology, engineering. Expert accounts by leading academics and industrial scientists.
