Download or read book Systems Modeling and Simulation Theory and Applications written by Doo-Kwon Baik and published by Springer Science & Business Media. This book was released on 2005-01-31 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the third Asian Simulation Conference, AsiaSim 2004, held in Jeju Island, Korea in October 2004. The 78 revised full papers presented together with 2 invited keynote papers were carefully reviewed and selected from 178 submissions; after the conference, the papers went through another round of revision. The papers are organized in topical sections on modeling and simulation methodology, manufacturing, aerospace simulation, military simulation, medical simulation, general applications, network simulation and modeling, e-business simulation, numerical simulation, traffic simulation, transportation, virtual reality, engineering applications, and DEVS modeling and simulation.
Download or read book Systems Modeling and Simulation written by Koji Koyamada and published by Springer Science & Business Media. This book was released on 2007-07-05 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Asia Simulation Conference 2006 (JSST 2006) was aimed at exploring challenges in methodologies for modeling, control and computation in simu lation, and their applications in social, economic, and financial fields as well as established scientific and engineering solutions. The conference was held in Tokyo from October 30 to November 1, 2006, and included keynote speeches presented by technology and industry leaders, technical sessions, organized sessions, poster sessions, and vendor exhibits. It was the seventh annual inter national conference on system simulation and scientific computing, which is organized by the Japan Society for Simulation Technology (JSST), the Chi nese Association for System Simulation (CASS), and the Korea Society for Simulation (KSS). For the conference, all submitted papers were refereed by the international technical program committee, each paper receiving at least two independent reviews. After careful reviews by the committee, 65 papers from 143 submis sions were selected for oral presentation. This volume includes the keynote speakers' papers along with the papers presented at the oral sessions and the organized sessions. As a result, we are publishing 87 papers for the conference in this volume. In addition to the scientific tracts presented, the conference featured keynote presentations by five invited speakers. We are grateful to them for accepting our invitation and for their presentations. We also would like to express our gratitude to all contributors, reviewers, technical program conmiittee members, and organizing committee members who made the conference very successful.
Download or read book Discrete Event Modeling and Simulation written by Gabriel A. Wainer and published by CRC Press. This book was released on 2018-09-03 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collecting the work of the foremost scientists in the field, Discrete-Event Modeling and Simulation: Theory and Applications presents the state of the art in modeling discrete-event systems using the discrete-event system specification (DEVS) approach. It introduces the latest advances, recent extensions of formal techniques, and real-world examples of various applications. The book covers many topics that pertain to several layers of the modeling and simulation architecture. It discusses DEVS model development support and the interaction of DEVS with other methodologies. It describes different forms of simulation supported by DEVS, the use of real-time DEVS simulation, the relationship between DEVS and graph transformation, the influence of DEVS variants on simulation performance, and interoperability and composability with emphasis on DEVS standardization. The text also examines extensions to DEVS, new formalisms, and abstractions of DEVS models as well as the theory and analysis behind real-world system identification and control. To support the generation and search of optimal models of a system, a framework is developed based on the system entity structure and its transformation to DEVS simulation models. In addition, the book explores numerous interesting examples that illustrate the use of DEVS to build successful applications, including optical network-on-chip, construction/building design, process control, workflow systems, and environmental models. A one-stop resource on advances in DEVS theory, applications, and methodology, this volume offers a sampling of the best research in the area, a broad picture of the DEVS landscape, and trend-setting applications enabled by the DEVS approach. It provides the basis for future research discoveries and encourages the development of new applications.
Download or read book Guide to Modeling and Simulation of Systems of Systems written by Bernard Zeigler and published by Springer Science & Business Media. This book was released on 2012-10-22 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user’s reference is a companion to the separate book also titled “Guide to Modelling and Simulation of Systems of Systems.” The principal book explicates integrated development environments to support virtual building and testing of systems of systems, covering in some depth the MS4 Modelling EnvironmentTM. This user’s reference provides a quick reference and exposition of the various concepts and functional features covered in that book. The topics in the user’s reference are grouped in alignment with the workflow displayed on the MS4 Modeling EnvironmentTM launch page, under the headings Atomic Models, System Entity Structure, Pruning SES, and Miscellaneous. For each feature, the reference discusses why we use it, when we should use it, and how to use it. Further comments and links to related features are also included.
Download or read book Modeling and Simulation Support for System of Systems Engineering Applications written by Larry B. Rainey and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: “...a much-needed handbook with contributions from well-chosen practitioners. A primary accomplishment is to provide guidance for those involved in modeling and simulation in support of Systems of Systems development, more particularly guidance that draws on well-conceived academic research to define concepts and terms, that identifies primary challenges for developers, and that suggests fruitful approaches grounded in theory and successful examples.” Paul Davis, The RAND Corporation Modeling and Simulation Support for System of Systems Engineering Applications provides a comprehensive overview of the underlying theory, methods, and solutions in modeling and simulation support for system of systems engineering. Highlighting plentiful multidisciplinary applications of modeling and simulation, the book uniquely addresses the criteria and challenges found within the field. Beginning with a foundation of concepts, terms, and categories, a theoretical and generalized approach to system of systems engineering is introduced, and real-world applications via case studies and examples are presented. A unified approach is maintained in an effort to understand the complexity of a single system as well as the context among other proximate systems. In addition, the book features: Cutting edge coverage of modeling and simulation within the field of system of systems, including transportation, system health management, space mission analysis, systems engineering methodology, and energy State-of-the-art advances within multiple domains to instantiate theoretic insights, applicable methods, and lessons learned from real-world applications of modeling and simulation The challenges of system of systems engineering using a systematic and holistic approach Key concepts, terms, and activities to provide a comprehensive, unified, and concise representation of the field A collection of chapters written by over 40 recognized international experts from academia, government, and industry A research agenda derived from the contribution of experts that guides scholars and researchers towards open questions Modeling and Simulation Support for System of Systems Engineering Applications is an ideal reference and resource for academics and practitioners in operations research, engineering, statistics, mathematics, modeling and simulation, and computer science. The book is also an excellent course book for graduate and PhD-level courses in modeling and simulation, engineering, and computer science.
Download or read book Theory Methodology Tools and Applications for Modeling and Simulation of Complex Systems written by Lin Zhang and published by Springer. This book was released on 2016-09-21 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume set (CCIS 643, 644, 645, 646) constitutes the refereed proceedings of the 16th Asia Simulation Conference and the First Autumn Simulation Multi-Conference, AsiaSim / SCS AutumnSim 2016, held in Beijing, China, in October 2016. The 265 revised full papers presented were carefully reviewed and selected from 651 submissions. The papers in this second volume of the set are organized in topical sections on HMI and robot simulations; modeling and simulation for intelligent manufacturing; military simulation; visualization and virtual reality.
Download or read book Modeling and Simulation written by Hans-Joachim Bungartz and published by Springer Science & Business Media. This book was released on 2013-10-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Autoren führen auf anschauliche und systematische Weise in die mathematische und informatische Modellierung sowie in die Simulation als universelle Methodik ein. Es geht um Klassen von Modellen und um die Vielfalt an Beschreibungsarten. Aber es geht immer auch darum, wie aus Modellen konkrete Simulationsergebnisse gewonnen werden können. Nach einem kompakten Repetitorium zum benötigten mathematischen Apparat wird das Konzept anhand von Szenarien u. a. aus den Bereichen „Spielen – entscheiden – planen" und „Physik im Rechner" umgesetzt.
Download or read book Modeling Simulation and Optimization written by Biplab Das and published by Springer Nature. This book was released on 2021-03-17 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected peer-reviewed papers presented at the International Conference on Modeling, Simulation and Optimization, organized by National Institute of Technology, Silchar, Assam, India, during 3–5 August 2020. The book covers topics of modeling, simulation and optimization, including computational modeling and simulation, system modeling and simulation, device/VLSI modeling and simulation, control theory and applications, modeling and simulation of energy system and optimization. The book disseminates various models of diverse systems and includes solutions of emerging challenges of diverse scientific fields.
Download or read book Building Software for Simulation written by James J. Nutaro and published by John Wiley & Sons. This book was released on 2011-03-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Software for Simulation A unique guide to the design and implementation of simulation software This book offers a concise introduction to the art of building simulation software, collecting the most important concepts and algorithms in one place. Written for both individuals new to the field of modeling and simulation as well as experienced practitioners, this guide explains the design and implementation of simulation software used in the engineering of large systems while presenting the relevant mathematical elements, concept discussions, and code development. The book approaches the topic from the perspective of Zeigler’s theory of modeling and simulation, introducing the theory’s fundamental concepts and showing how to apply them to engineering problems. Readers will learn five necessary skills for building simulations of complicated systems: Working with fundamental abstractions for simulating dynamic systems Developing basic simulation algorithms for continuous and discrete event models Combining continuous and discrete event simulations into a coherent whole Applying strategies for testing a simulation Understanding the theoretical foundations of the modeling constructs and simulation algorithms The central chapters of the book introduce, explain, and demonstrate the elements of the theory that are most important for building simulation tools. They are bracketed by applications to robotics, control and communications, and electric power systems; these comprehensive examples clearly illustrate how the concepts and algorithms are put to use. Readers will explore the design of object-oriented simulation programs, simulation using multi-core processors, and the integration of simulators into larger software systems. The focus on software makes this book particularly useful for computer science and computer engineering courses in simulation that focus on building simulators. It is indispensable reading for undergraduate and graduate students studying modeling and simulation, as well as for practicing scientists and engineers involved in the development of simulation tools.
Download or read book Theory of Modeling and Simulation written by Bernard P. Zeigler and published by Academic Press. This book was released on 2018-08-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Modeling and Simulation: Discrete Event & Iterative System Computational Foundations, Third Edition, continues the legacy of this authoritative and complete theoretical work. It is ideal for graduate and PhD students and working engineers interested in posing and solving problems using the tools of logico-mathematical modeling and computer simulation. Continuing its emphasis on the integration of discrete event and continuous modeling approaches, the work focuses light on DEVS and its potential to support the co-existence and interoperation of multiple formalisms in model components. New sections in this updated edition include discussions on important new extensions to theory, including chapter-length coverage of iterative system specification and DEVS and their fundamental importance, closure under coupling for iteratively specified systems, existence, uniqueness, non-deterministic conditions, and temporal progressiveness (legitimacy). - Presents a 40% revised and expanded new edition of this classic book with many important post-2000 extensions to core theory - Provides a streamlined introduction to Discrete Event System Specification (DEVS) formalism for modeling and simulation - Packages all the "need-to-know" information on DEVS formalism in one place - Expanded to include an online ancillary package, including numerous examples of theory and implementation in DEVS-based software, student solutions and instructors manual
Download or read book Theory of Modeling and Simulation written by Bernard P. Zeigler and published by Academic Press. This book was released on 2000-01-10 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased computational power and software tools available to engineers have increased the use and dependence on modeling and computer simulation throughout the design process. These tools have given engineers the capability of designing highly complex systems and computer architectures that were previously unthinkable. Every complex design project, from integrated circuits, to aerospace vehicles, to industrial manufacturing processes requires these new methods. This book fulfills the essential need of system and control engineers at all levels in understanding modeling and simulation. This book, written as a true text/reference has become a standard sr./graduate level course in all EE departments worldwide and all professionals in this area are required to update their skills. The book provides a rigorous mathematical foundation for modeling and computer simulation. It provides a comprehensive framework for modeling and simulation integrating the various simulation approaches. It covers model formulation, simulation model execution, and the model building process with its key activities model abstraction and model simplification, as well as the organization of model libraries. Emphasis of the book is in particular in integrating discrete event and continuous modeling approaches as well as a new approach for discrete event simulation of continuous processes. The book also discusses simulation execution on parallel and distributed machines and concepts for simulation model realization based on the High Level Architecture (HLA) standard of the Department of Defense. Presents a working foundation necessary for compliance with High Level Architecture (HLA) standards Provides a comprehensive framework for continuous and discrete event modeling and simulation Explores the mathematical foundation of simulation modeling Discusses system morphisms for model abstraction and simplification Presents a new approach to discrete event simulation of continuous processes Includes parallel and distributed simulation of discrete event models Presents a concept to achieve simulator interoperability in the form of the DEVS-Bus
Download or read book Multi Agent Systems written by Adelinde M. Uhrmacher and published by CRC Press. This book was released on 2018-10-08 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methodological Guidelines for Modeling and Developing MAS-Based Simulations The intersection of agents, modeling, simulation, and application domains has been the subject of active research for over two decades. Although agents and simulation have been used effectively in a variety of application domains, much of the supporting research remains scattered in the literature, too often leaving scientists to develop multi-agent system (MAS) models and simulations from scratch. Multi-Agent Systems: Simulation and Applications provides an overdue review of the wide ranging facets of MAS simulation, including methodological and application-oriented guidelines. This comprehensive resource reviews two decades of research in the intersection of MAS, simulation, and different application domains. It provides scientists and developers with disciplined engineering approaches to modeling and developing MAS-based simulations. After providing an overview of the field’s history and its basic principles, as well as cataloging the various simulation engines for MAS, the book devotes three sections to current and emerging approaches and applications. Simulation for MAS — explains simulation support for agent decision making, the use of simulation for the design of self-organizing systems, the role of software architecture in simulating MAS, and the use of simulation for studying learning and stigmergic interaction. MAS for Simulation — discusses an agent-based framework for symbiotic simulation, the use of country databases and expert systems for agent-based modeling of social systems, crowd-behavior modeling, agent-based modeling and simulation of adult stem cells, and agents for traffic simulation. Tools — presents a number of representative platforms and tools for MAS and simulation, including Jason, James II, SeSAm, and RoboCup Rescue. Complete with over 200 figures and formulas, this reference book provides the necessary overview of experiences with MAS simulation and the tools needed to exploit simulation in MAS for future research in a vast array of applications including home security, computational systems biology, and traffic management.
Download or read book Handbook of Real World Applications in Modeling and Simulation written by John A. Sokolowski and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces various modeling and simulation methods and paradigms that are used to explain and solve the predominant challenges facing society Handbook of Real-World Applications in Modeling and Simulation provides a thorough explanation of modeling and simulation in the most useful, current, and predominant applied areas of transportation, homeland security, medicine, operational research, military science, and business modeling. Offering a cutting-edge and accessible presentation, this book discusses how and why the presented domains have become leading applications of modeling and simulation techniques. Contributions from leading academics and researchers integrate modeling and simulation theories, methods, and data to analyze challenges that involve technological and social issues. The book begins with an introduction that explains why modeling and simulation is a reliable analysis assessment tool for complex systems problems. Subsequent chapters provide an orientation to various modeling and simulation methods and paradigms that are used to explain and solve the predominant challenges across real-world applied domains. Additionally, the handbook: Provides a practical one-stop reference on modeling and simulation and contains an accessible introduction to key concepts and techniques Introduces, trains, and prepares readers from statistics, mathematics, engineering, computer science, economics, and business to use modeling and simulation in their studies and research Features case studies that are representative of fundamental areas of multidisciplinary studies and provides a concise look at the key concepts of modeling and simulation Contains a collection of original ideas on modeling and simulation to help academics and practitioners develop a multifunctional perspective Self-contained chapters offer a comprehensive approach to explaining each respective domain and include sections that explore the related history, theory, modeling paradigms, and case studies. Key terms and techniques are clearly outlined, and exercise sets allow readers to test their comprehension of the presented material. Handbook of Real-World Applications in Modeling and Simulation is an essential reference for academics and practitioners in the areas of operations research, business, management science, engineering, statistics, mathematics, and computer science. The handbook is also a suitable supplement for courses on modeling and simulation at the graduate level.
Download or read book Manufacturing Systems Modeling and Analysis written by Guy L. Curry and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the practical application of queueing theory results for the design and analysis of manufacturing and production systems. This textbook makes accessible to undergraduates and beginning graduates many of the seemingly esoteric results of queueing theory. In an effort to apply queueing theory to practical problems, there has been considerable research over the previous few decades in developing reasonable approximations of queueing results. This text takes full advantage of these results and indicates how to apply queueing approximations for the analysis of manufacturing systems. Support is provided through the web site http://msma.tamu.edu. Students will have access to the answers of odd numbered problems and instructors will be provided with a full solutions manual, Excel files when needed for homework, and computer programs using Mathematica that can be used to solve homework and develop additional problems or term projects. In this second edition a separate appendix dealing with some of the basic event-driven simulation concepts has been added.
Download or read book Hybrid Simulation written by Victor Saouma and published by CRC Press. This book was released on 2014-04-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Simulation deals with a rapidly evolving technology combining computer simulation (typically finite element) and physical laboratory testing of two complementary substructures. It is a cost effective alternative to shaking table test, and allows for the improved understanding of complex coupled systems. Traditionally, numerical simulation an
Download or read book Modeling and Simulation in Biomedical Engineering Applications in Cardiorespiratory Physiology written by Willem L. van Meurs and published by McGraw Hill Professional. This book was released on 2011-08-07 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: THEORY AND PRACTICE OF MODELING AND SIMULATING HUMAN PHYSIOLOGY Written by a coinventor of the Human Patient Simulator (HPS) and past president of the Society in Europe for Simulation Applied to Medicine (SESAM), Modeling and Simulation in Biomedical Engineering: Applications in Cardiorespiratory Physiology is a compact and consistent introduction to this expanding field. The book divides the modeling and simulation process into five manageable steps--requirements, conceptual models, mathematical models, software implementation, and simulation results and validation. A framework and a basic set of deterministic, continuous-time models for the cardiorespiratory system are provided. This timely resource also addresses advanced topics, including sensitivity analysis and setting model requirements as part of an encompassing simulation and simulator design. Practical examples provide you with the skills to evaluate and adapt existing physiologic models or create new ones for specific applications. Coverage includes: Signals and systems Model requirements Conceptual models Mathematical models Software implementation Simulation results and model validation Cardiorespiratory system model Circulation Respiration Physiologic control Sensitivity analysis of a cardiovascular model Design of model-driven acute care training simulators “Uniquely qualified to author such a text, van Meurs is one of the original developers of CAE Healthcare’s Human Patient Simulator (HPS). ...His understanding of mathematics, human physiology, pharmacology, control systems, and systems engineering, combined with a conversational writing style, results in a readable text. ...The ample illustrations and tables also break up the text and make reading the book easier on the eyes. ...concise yet in conversational style, with real-life examples. This book is highly recommended for coursework in physiologic modeling and for all who are interested in simulator design and development. The book pulls all these topics together under one cover and is an important contribution to biomedical literature.” --IEEE Pulse, January 2014 “This book is written by a professional engineer who is unique in that he seems to have a natural understanding of 3 key areas as follows: the hardware involved with simulators, human physiology, and mathematical modeling. Willem van Meurs is one of the inventors of the model-driven human patient simulator (HPS), and so, he is very qualified to write this book. The book is written in a clear way, using the first person throughout, in a conversational manner, with a style that involves posing questions and answering them in subsequent text. ...The book starts with a very useful introduction and background chapter, setting out the scene for the rest of the book. ...I have used his book in enhancing my own talks and understanding human patient simulation and can strongly recommend it.” --Simulation in Healthcare December, 2012 Reviewed by Mark A. Tooley, Ph.D., Department of Medical Physics and Bioengineering, Royal United Hospital, Combe Park, Bath, UK.
Download or read book Modeling Complex Living Systems written by N. Bellomo and published by Springer Science & Business Media. This book was released on 2008 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops different mathematical methods and tools to model living systems. This book presents material that can be used in such real-world applications as immunology, transportation engineering, and economics. It is of interest to those involved in modeling complex social systems and living matter in general.
