Download or read book The Certified Software Quality Engineer Handbook written by Linda Westfall and published by Quality Press. This book was released on 2016-09-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains information and guidance that supports all of the topics of the 2016 version of the CSQE Body of Knowledge (BoK) upon which ASQ's Certified Software Quality Engineer/(CSQE) exam is based. Armed with the knowledge presented in this handbook to complement the required years of actual work experience, qualified software quality practitioners may feel confident they have taken appropriate steps in preparation for the ASQ CSQE exam. However, the goals for this handbook go well beyond it being a CSQE exam preparation guide. Its author designed this handbook not only to help the software quality engineers, but as a resource for software development practitioners, project managers, organizational managers, other quality practitioners, and other professionals who need to understand the aspects of software quality that impact their work. It can also be used to benchmark their (or their organization's) understanding and application of software quality principles and practices against what is considered a cross-industry good practice baseline. After all, taking stock of strengths and weaknesses, software engineers can develop proactive strategies to leverage software quality as a competitive advantage. New software quality engineers can use this handbook to gain an understanding of their chosen profession. Experienced software quality engineers can use this handbook as a reference source when performing their daily work. It is also hoped that trainers and educators will use this handbook to help propagate software quality engineering knowledge to future software practitioners and managers. Finally, this handbook strives to establish a common vocabulary that software quality engineers, and others in their organizations can use to communicate about software and quality. Thus increasing the professionalism of the industry and eliminating the wastes that can result from ambiguity and misunderstandings.

Download or read book Software Project Management written by Moh’d A. Radaideh and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-18 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Systems and Software Engineering Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2017-12-01 with total page 2124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals in the interdisciplinary field of computer science focus on the design, operation, and maintenance of computational systems and software. Methodologies and tools of engineering are utilized alongside computer applications to develop efficient and precise information databases. Computer Systems and Software Engineering: Concepts, Methodologies, Tools, and Applications is a comprehensive reference source for the latest scholarly material on trends, techniques, and uses of various technology applications and examines the benefits and challenges of these computational developments. Highlighting a range of pertinent topics such as utility computing, computer security, and information systems applications, this multi-volume book is ideally designed for academicians, researchers, students, web designers, software developers, and practitioners interested in computer systems and software engineering.

Download or read book INCOSE Systems Engineering Handbook written by INCOSE and published by John Wiley & Sons. This book was released on 2023-07-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: SYSTEMS ENGINEERING HANDBOOK A comprehensive reference on the discipline and practice of systems engineering Systems engineering practitioners provide a wide range of vital functions, conceiving, developing, and supporting complex engineered systems with many interacting elements. The International Council on Systems Engineering (INCOSE) Systems Engineering Handbook describes the state-of-the-good-practice of systems engineering. The result is a comprehensive guide to systems engineering activities across any number of possible projects. From automotive to defense to healthcare to infrastructure, systems engineering practitioners are at the heart of any project built on complex systems. INCOSE Systems Engineering Handbook readers will find: Elaboration on the key systems life cycle processes described in ISO/IEC/IEEE 15288:2023; Chapters covering key systems engineering concepts, system life cycle processes and methods, tailoring and application considerations, systems engineering in practice, and more; and Appendices, including an N2 diagram of the systems engineering processes and a detailed topical index. The INCOSE Systems Engineering Handbook is a vital reference for systems engineering practitioners and engineers in other disciplines looking to perform or understand the discipline of systems engineering.

Download or read book Process Improvement with CMMI v1 2 and ISO Standards written by Boris Mutafelija and published by CRC Press. This book was released on 2008-10-30 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this age of globalization, process improvement practitioners must be able to comprehend and work with the different standards and frameworks used around the world. While many systems and software engineering organizations rely on a single standard as the primary driver of process improvement efforts (CMMI-based process improvement in the U.S. an

Download or read book Software Configuration Management Handbook Third Edition written by Alexis Leon and published by Artech House. This book was released on 2015-02-01 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software configuration management (SCM) is one of the scientific tools that is aimed to bring control to the software development process. This new resource is a complete guide to implementing, operating, and maintaining a successful SCM system for software development. Project managers, system designers, and software developers are presented with not only the basics of SCM, but also the different phases in the software development lifecycle and how SCM plays a role in each phase. The factors that should be considered and the pitfalls that should be avoided while designing the SCM system and SCM plan are also discussed. In addition, this third edition is updated to include cloud computing and on-demand systems. This book does not rely on one specific tool or standard for explaining the SCM concepts and techniques; In fact, it gives readers enough information about SCM, the mechanics of SCM, and SCM implementation, so that they can successfully implement a SCM system.

Download or read book Handbook of Software Engineering and Knowledge Engineering written by Shi Kuo Chang and published by World Scientific. This book was released on 2001 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first handbook to cover comprehensively both software engineering and knowledge engineering OCo two important fields that have become interwoven in recent years. Over 60 international experts have contributed to the book. Each chapter has been written in such a way that a practitioner of software engineering and knowledge engineering can easily understand and obtain useful information. Each chapter covers one topic and can be read independently of other chapters, providing both a general survey of the topic and an in-depth exposition of the state of the art. Practitioners will find this handbook useful when looking for solutions to practical problems. Researchers can use it for quick access to the background, current trends and most important references regarding a certain topic. The handbook consists of two volumes. Volume One covers the basic principles and applications of software engineering and knowledge engineering. Volume Two will cover the basic principles and applications of visual and multimedia software engineering, knowledge engineering, data mining for software knowledge, and emerging topics in software engineering and knowledge engineering. Sample Chapter(s). Chapter 1.1: Introduction (97k). Chapter 1.2: Theoretical Language Research (97k). Chapter 1.3: Experimental Science (96k). Chapter 1.4: Evolutionary Versus Revolutionary (108k). Chapter 1.5: Concurrency and Parallelisms (232k). Chapter 1.6: Summary (123k). Contents: Computer Language Advances (D E Cooke et al.); Software Maintenance (G Canfora & A Cimitile); Requirements Engineering (A T Berztiss); Software Engineering Standards: Review and Perspectives (Y-X Wang); A Large Scale Neural Network and Its Applications (D Graupe & H Kordylewski); Software Configuration Management in Software and Hypermedia Engineering: A Survey (L Bendix et al.); The Knowledge Modeling Paradigm in Knowledge Engineering (E Motta); Software Engineering and Knowledge Engineering Issues in Bioinformatics (J T L Wang et al.); Conceptual Modeling in Software Engineering and Knowledge Engineering: Concepts, Techniques and Trends (O Dieste et al.); Rationale Management in Software Engineering (A H Dutoit & B Paech); Exploring Ontologies (Y Kalfoglou), and other papers. Readership: Graduate students, researchers, programmers, managers and academics in software engineering and knowledge engineering."

Download or read book Handbook Of Software Engineering And Knowledge Engineering Vol 1 Fundamentals written by Shi-kuo Chang and published by World Scientific. This book was released on 2001-12-27 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first handbook to cover comprehensively both software engineering and knowledge engineering - two important fields that have become interwoven in recent years. Over 60 international experts have contributed to the book. Each chapter has been written in such a way that a practitioner of software engineering and knowledge engineering can easily understand and obtain useful information. Each chapter covers one topic and can be read independently of other chapters, providing both a general survey of the topic and an in-depth exposition of the state of the art. Practitioners will find this handbook useful when looking for solutions to practical problems. Researchers can use it for quick access to the background, current trends and most important references regarding a certain topic.The handbook consists of two volumes. Volume One covers the basic principles and applications of software engineering and knowledge engineering.Volume Two will cover the basic principles and applications of visual and multimedia software engineering, knowledge engineering, data mining for software knowledge, and emerging topics in software engineering and knowledge engineering.

Download or read book Software Engineering Processes written by Yingxu Wang and published by CRC Press. This book was released on 2000-04-21 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software engineering is playing an increasingly significant role in computing and informatics, necessitated by the complexities inherent in large-scale software development. To deal with these difficulties, the conventional life-cycle approaches to software engineering are now giving way to the "process system" approach, encompassing development me

Download or read book Systems Engineering and management for Sustainable Development Volume I written by Andrew P. Sage and published by EOLSS Publications. This book was released on 2009-09-30 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Engineering and Management for Sustainable Development is a component of Encyclopedia of Technology, Information, and Systems Management Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. This theme discusses: basic principles of systems engineering and management for sustainable development, including: cost effectiveness assessment; decision assessment, tradeoffs, conflict resolution and negotiation; research and development policy; industrial ecology; and risk management strategies for sustainability. The emphasis throughout will be upon the development of appropriate life-cycles for processes that assist in the attainment of sustainable development, and in the use of appropriate policies and systems management approaches to ensure successful application of these processes. The general objectives of these chapters is to illustrate the way in which one specific issue, such as the need to bring about sustainable development, necessarily grows in scope such that it becomes only feasible to consider the engineering and architecting of appropriate systems when the specific issue is imbedded into a wealth of other issues. The discussions provide an illustration of the many attributes and needs associated with the important task of utilizing information and knowledge, enabled through systems engineering and management, to engineer systems involving humans, organizations, and technology, in the support of sustainability. These two volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.

Download or read book MEDINFO 2019 Health and Wellbeing e Networks for All written by L. Ohno-Machado and published by IOS Press. This book was released on 2019-11-12 with total page 2078 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining and integrating cross-institutional data remains a challenge for both researchers and those involved in patient care. Patient-generated data can contribute precious information to healthcare professionals by enabling monitoring under normal life conditions and also helping patients play a more active role in their own care. This book presents the proceedings of MEDINFO 2019, the 17th World Congress on Medical and Health Informatics, held in Lyon, France, from 25 to 30 August 2019. The theme of this year’s conference was ‘Health and Wellbeing: E-Networks for All’, stressing the increasing importance of networks in healthcare on the one hand, and the patient-centered perspective on the other. Over 1100 manuscripts were submitted to the conference and, after a thorough review process by at least three reviewers and assessment by a scientific program committee member, 285 papers and 296 posters were accepted, together with 47 podium abstracts, 7 demonstrations, 45 panels, 21 workshops and 9 tutorials. All accepted paper and poster contributions are included in these proceedings. The papers are grouped under four thematic tracks: interpreting health and biomedical data, supporting care delivery, enabling precision medicine and public health, and the human element in medical informatics. The posters are divided into the same four groups. The book presents an overview of state-of-the-art informatics projects from multiple regions of the world; it will be of interest to anyone working in the field of medical informatics.

Download or read book Documenting Software Architectures written by Paul Clements and published by Pearson Education. This book was released on 2010-10-05 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software architecture—the conceptual glue that holds every phase of a project together for its many stakeholders—is widely recognized as a critical element in modern software development. Practitioners have increasingly discovered that close attention to a software system’s architecture pays valuable dividends. Without an architecture that is appropriate for the problem being solved, a project will stumble along or, most likely, fail. Even with a superb architecture, if that architecture is not well understood or well communicated the project is unlikely to succeed. Documenting Software Architectures, Second Edition, provides the most complete and current guidance, independent of language or notation, on how to capture an architecture in a commonly understandable form. Drawing on their extensive experience, the authors first help you decide what information to document, and then, with guidelines and examples (in various notations, including UML), show you how to express an architecture so that others can successfully build, use, and maintain a system from it. The book features rules for sound documentation, the goals and strategies of documentation, architectural views and styles, documentation for software interfaces and software behavior, and templates for capturing and organizing information to generate a coherent package. New and improved in this second edition: Coverage of architectural styles such as service-oriented architectures, multi-tier architectures, and data models Guidance for documentation in an Agile development environment Deeper treatment of documentation of rationale, reflecting best industrial practices Improved templates, reflecting years of use and feedback, and more documentation layout options A new, comprehensive example (available online), featuring documentation of a Web-based service-oriented system Reference guides for three important architecture documentation languages: UML, AADL, and SySML

Download or read book Requirements Engineering and Management for Software Development Projects written by Murali Chemuturi and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requirements Engineering and Management for Software Development Projects presents a complete guide on requirements for software development including engineering, computer science and management activities. It is the first book to cover all aspects of requirements management in software development projects. This book introduces the understanding of the requirements, elicitation and gathering, requirements analysis, verification and validation of the requirements, establishment of requirements, different methodologies in brief, requirements traceability and change management among other topics. The best practices, pitfalls, and metrics used for efficient software requirements management are also covered. Intended for the professional market, including software engineers, programmers, designers and researchers, this book is also suitable for advanced-level students in computer science or engineering courses as a textbook or reference.

Download or read book The Engineering of Large Systems written by and published by Academic Press. This book was released on 1998-09-25 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its first volume in 1960, Advances in Computers has presented detailed coverage of innovations in hardware and software and in computer theory, design, and applications. It has also provided contributors with a medium in which they can examine their subjects in greater depth and breadth than that allowed by standard journal articles. As a result, many articles have become standard references that continue to be of significant, lasting value despite the rapid growth taking place in the field.This volume is organized around engineering large scale software systems. It discusses which technologies are useful for building these systems, which are useful to incorporate in these systems, and which are useful to evaluate these systems.

Download or read book Concise Guide to Software Engineering written by Gerard O'Regan and published by Springer Nature. This book was released on 2022-09-24 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a concise introduction to the fundamental principles of software engineering, together with practical guidance on how to apply the theory in a real-world, industrial environment. The wide-ranging coverage encompasses all areas of software design, management, and quality. Topics and features: presents a broad overview of software engineering, including software lifecycles and phases in software development, and project management for software engineering; examines the areas of requirements engineering, software configuration management, software inspections, software testing, software quality assurance, and process quality; covers topics on software metrics and problem solving, software reliability and dependability, and software design and development, including Agile approaches; explains formal methods, a set of mathematical techniques to specify and derive a program from its specification, introducing the Z specification language; discusses software process improvement, describing the CMMI model, and introduces UML, a visual modelling language for software systems; reviews a range of tools to support various activities in software engineering, and offers advice on the selection and management of a software supplier; describes such innovations in the field of software as distributed systems, service-oriented architecture, software as a service, cloud computing, and embedded systems; includes key learning topics, summaries and review questions in each chapter, together with a useful glossary. This practical and easy-to-follow textbook/reference is ideal for computer science students seeking to learn how to build high quality and reliable software on time and on budget. The text also serves as a self-study primer for software engineers, quality professionals, and software managers.

Download or read book Evaluation of Novel Approaches to Software Engineering written by Leszek A. Maciaszek and published by Springer. This book was released on 2016-02-13 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 10th International Conference on Evaluation of Novel Approaches to Software Engineering, ENASE 2015, held in Barcelona, Spain, in April 2015. The 10 full papers presented were carefully reviewed and selected from 74 submissions. The papers reflect a growing effort to increase the dissemination of new results among researchers and professionals related to evaluation of novel approaches to software engineering. By comparing novel approaches with established traditional practices and by evaluating them against software quality criteria, the ENASE conferences advance knowledge and research in software engineering, identify most hopeful trends, and propose new directions for consideration by researchers and practitioners involved in large-scale software development and integration.

Download or read book The Basics of IT Audit written by Stephen D. Gantz and published by Elsevier. This book was released on 2013-10-31 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Basics of IT Audit: Purposes, Processes, and Practical Information provides you with a thorough, yet concise overview of IT auditing. Packed with specific examples, this book gives insight into the auditing process and explains regulations and standards such as the ISO-27000, series program, CoBIT, ITIL, Sarbanes-Oxley, and HIPPA. IT auditing occurs in some form in virtually every organization, private or public, large or small. The large number and wide variety of laws, regulations, policies, and industry standards that call for IT auditing make it hard for organizations to consistently and effectively prepare for, conduct, and respond to the results of audits, or to comply with audit requirements. This guide provides you with all the necessary information if you're preparing for an IT audit, participating in an IT audit or responding to an IT audit. - Provides a concise treatment of IT auditing, allowing you to prepare for, participate in, and respond to the results - Discusses the pros and cons of doing internal and external IT audits, including the benefits and potential drawbacks of each - Covers the basics of complex regulations and standards, such as Sarbanes-Oxley, SEC (public companies), HIPAA, and FFIEC - Includes most methods and frameworks, including GAAS, COSO, COBIT, ITIL, ISO (27000), and FISCAM