Download or read book Systems Analysis and Simulation in Ecology written by Bernard C. Patten and published by Elsevier. This book was released on 2013-09-11 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Analysis and Simulation in Ecology, Volume I, is a book of ecology in transition from a ""soft"" science, synecology, to a ""hard"" science, systems ecology. It is an enthusiastic and optimistic statement about the fundamental adaptability of the scientific mechanism to newly appreciated truths of existence. It documents, in ecological science, a move away from the explanatory or cognitive criterion toward the predictive criterion, a hard one with the potential of leading ultimately to optimal design and control of ecosystems. The book is organized into three parts. Part I is an overview of some of the methods and rationales for ecological systems modeling for the purposes of simulation and systems analysis. It provides an elementary introduction to the use of analog and digital computers for simulation and a rationale for ecological model-building. Part II illustrates three different approaches to population modeling. These include a mathematical analysis of microbial (Chlorella, Selenastrum) dynamics in both continuous and batch cultures; and a bioenergetics study of the terrestrial isopod Armadillidium, utilizing concepts from control theory and the transfer function technique of classical dynamic analysis. Part III brings together a group of papers describing various aspects and philosophies of ecological simulation. These include common problems in ecosystem simulation and the question whether or not some of the newer methods of systems ecology might not be used in connection with some of the older data and observations of traditional synecology.
Download or read book Systems Analysis and Modeling written by Donald W. Boyd and published by Elsevier. This book was released on 2000-10-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Analysis and Modeling presents a fresh, new approach to systems analysis and modeling with a systems science flavor that stimulates systems thinking. After introducing systems modeling principles, the ensuing wide selection of examples aptly illustrate that anything which changes over time can be modeled as a system. Each example begins with a knowledge base that displays relevant information obtained from systems analysis. The diversity of examples clearly establishes a new protocol for synthesizing systems models. Macro-to-micro, top-down approach Multidisciplinary examples Incorporation of human knowledge to synthesise a systems model Clear and concise systems delimitation Complex systems using simple mathematics "Exact" reproduction of historical data plus model generated secondary data Systems simulation via systems models
Download or read book Ecology and Natural Resource Management written by William E. Grant and published by John Wiley & Sons. This book was released on 1997-03-05 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the theory and methods of systems analysis and computer modeling as applied to problems in ecology and natural resource management. It reflects the problems and conflicts between competing uses of limited space and the need for quantitative predictors of the outcome of various management strategies.
Download or read book Systems Analysis and Simulation I written by Achim Sydow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation has developed into a powerful tool for problem solving in a variety of areas, in the sciences as well as in industrial environments. New developments such as parallel simulation techniques will further improve the efficiency of the tool. Decision support systems, either based on mathematical models or on knowledge based expert systems will make computer simulation accessible to more users, and will provide better environments for systems analysis, modeling and simulation. Systems Analysis and Simulation presents the papers accepted for the 3rd International Symposium for Systems Analysis and Simulation held in Berlin (GDR) in September of 1988. The contributions selected for this two-volume set present the state of the art and current trends in computer simulation. Volume I emphasizes the theoretical foundations and the methodology for computer simulation and systems analysis. Volume II presents a variety of applications in fields such as manufacturing, robotics, economics, and biology.
Download or read book Physiological Control Systems written by Michael C. K. Khoo and published by John Wiley & Sons. This book was released on 2018-04-12 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to common control principles and how they are used to characterize a variety of physiological mechanisms The second edition of Physiological Control Systems offers an updated and comprehensive resource that reviews the fundamental concepts of classical control theory and how engineering methodology can be applied to obtain a quantitative understanding of physiological systems. The revised text also contains more advanced topics that feature applications to physiology of nonlinear dynamics, parameter estimation methods, and adaptive estimation and control. The author—a noted expert in the field—includes a wealth of worked examples that illustrate key concepts and methodology and offers in-depth analyses of selected physiological control models that highlight the topics presented. The author discusses the most noteworthy developments in system identification, optimal control, and nonlinear dynamical analysis and targets recent bioengineering advances. Designed to be a practical resource, the text includes guided experiments with simulation models (using Simulink/Matlab). Physiological Control Systems focuses on common control principles that can be used to characterize a broad variety of physiological mechanisms. This revised resource: Offers new sections that explore identification of nonlinear and time-varying systems, and provide the background for understanding the link between continuous-time and discrete-time dynamic models Presents helpful, hands-on experimentation with computer simulation models Contains fully updated problems and exercises at the end of each chapter Written for biomedical engineering students and biomedical scientists, Physiological Control Systems, offers an updated edition of this key resource for understanding classical control theory and its application to physiological systems. It also contains contemporary topics and methodologies that shape bioengineering research today.
Download or read book Analysis and Simulation of Chaotic Systems written by Frank C. Hoppensteadt and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Simulation of Chaotic Systems is a text designed to be used at the graduate level in applied mathematics for students from mathematics, engineering, physics, chemistry and biology. The book can be used as a stand-alone text for a full year course or it can be heavily supplemented with material of more mathematical, more engineering or more scientific nature. Computations and computer simulations are used throughout this text to illustrate phenomena discussed and to supply readers with probes to use on new problems.
Download or read book Systems Analysis and Simulation International Symposium Proceedings 12 16 Sep 1988 written by Systems analysis and simulation and published by . This book was released on 1989 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radar System Analysis and Modeling written by David K. Barton and published by Artech House. This book was released on 2004-10-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough update to the Artech House classic Modern Radar Systems Analysis, this reference is a comprehensive and cohesive introduction to radar systems design and performance estimation. It offers you the knowledge you need to specify, evaluate, or apply radar technology in civilian or military systems. The book presents accurate detection range equations that let you realistically estimate radar performance in a variety of practical situations. With its clear, easy-to-understand language, you quickly learn the tradeoffs between choice of wavelength and radar performance and see the inherent advantages and limitations associated with each radar band. You find modeling procedures to help you analyze enemy systems or evaluate radar integrated into new weapon systems. The book covers ECM and ECCM for both surveillance and tracking to help you estimate the effects of active and passive ECM, select hardware/software for reconnaissance or jamming, and plan the operation of EW systems. As radar systems evolve, this book provides the equations needed to calculate and evaluate the performance of the latest advances in radar technology.
Download or read book Introduction to Systems Analysis written by Dieter M. Imboden and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems and their mathematical description play an important role in all branches of science. This book offers an introduction to mathematical modeling techniques. It is intended for undergrad students in applied natural science, in particular earth and environmental science, environmental engineering, as well as ecology, environmental chemistry, chemical engineering, agronomy, and forestry. The focus is on developing the basic methods of modeling. Students will learn how to build mathematical models of their own, but also how to analyze the properties of existing models. The book neither derives mathematical formulae, nor does it describe modeling software, instead focusing on the fundamental concepts behind mathematical models. A formulary in the appendix summarizes the necessary mathematical knowledge. To support independent learners, numerous examples and problems from various scientific disciplines are provided throughout the book. Thanks in no small part to the cartoons by Nikolas Stürchler, this introduction to the colorful world of modeling is both entertaining and rich in content
Download or read book Analysis and Simulation of Electrical and Computer Systems written by Lesław Gołębiowski and published by Springer. This book was released on 2014-11-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected results of the XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE) which was held in Rzeszów and Czarna, Poland on September 27-30, 2013. The main aim of the Conference was to provide academia and industry to discuss and present the latest technological advantages and research results and to integrate the new interdisciplinary scientific circle in the field of electrical engineering, electronics and mechatronics. The Conference was organized by the Rzeszów Division of Polish Association of Theoretical and Applied Electrical Engineering (PTETiS) in cooperation with Rzeszów University of Technology, the Faculty of Electrical and Computer Engineering and Rzeszów University, the Faculty of Mathematics and Natural Sciences.
Download or read book Guide to Modeling and Simulation of Systems of Systems written by Bernard Zeigler and published by Springer Science & Business Media. This book was released on 2012-10-22 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user’s reference is a companion to the separate book also titled “Guide to Modelling and Simulation of Systems of Systems.” The principal book explicates integrated development environments to support virtual building and testing of systems of systems, covering in some depth the MS4 Modelling EnvironmentTM. This user’s reference provides a quick reference and exposition of the various concepts and functional features covered in that book. The topics in the user’s reference are grouped in alignment with the workflow displayed on the MS4 Modeling EnvironmentTM launch page, under the headings Atomic Models, System Entity Structure, Pruning SES, and Miscellaneous. For each feature, the reference discusses why we use it, when we should use it, and how to use it. Further comments and links to related features are also included.
Download or read book Transportation Systems Analysis written by Ennio Cascetta and published by Springer Science & Business Media. This book was released on 2009-08-22 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a rigorous and comprehensive coverage of transportation models and planning methods and is a must-have to anyone in the transportation community, including students, teachers, and practitioners." Moshe Ben-Akiva, Massachusetts Institute of Technology.
Download or read book Air Transport System Analysis and Modelling written by Milan Janic and published by CRC Press. This book was released on 2014-04-21 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive coverage, Air Transport System Analysis and Modelling is a unique text dealing with the analysis and modelling of the processes and operations carried out in all three parts of the air transport system, namely, airports, air traffic control and airlines. Seen from a planners point of view, this book provides insights into current methods and also gives details of new research. Methods are given for the analysis and modelling of the capacity, quality and economics of the service offered to users and includes illustrative analytical and simulation models of the systems operations supported by an appropriate analysis of real world events and applications. Undergraduates and graduates in the field of air transport planning and technology, applied operations research and applied transport economics will find this book to be of interest, as will specialists involved with transport institutes and consulting firms, policy makers dealing with air transport and the analysts and planners employed at air transport enterprises.
Download or read book Distribution System Modeling and Analysis written by William H. Kersting and published by CRC Press. This book was released on 2001-08-31 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real unders
Download or read book Modeling and Simulation of Computer Networks and Systems written by Faouzi Zarai and published by Morgan Kaufmann. This book was released on 2015-04-21 with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation of Computer Networks and Systems: Methodologies and Applications introduces you to a broad array of modeling and simulation issues related to computer networks and systems. It focuses on the theories, tools, applications and uses of modeling and simulation in order to effectively optimize networks. It describes methodologies for modeling and simulation of new generations of wireless and mobiles networks and cloud and grid computing systems. Drawing upon years of practical experience and using numerous examples and illustrative applications recognized experts in both academia and industry, discuss: Important and emerging topics in computer networks and systems including but not limited to; modeling, simulation, analysis and security of wireless and mobiles networks especially as they relate to next generation wireless networks Methodologies, strategies and tools, and strategies needed to build computer networks and systems modeling and simulation from the bottom up Different network performance metrics including, mobility, congestion, quality of service, security and more... Modeling and Simulation of Computer Networks and Systems is a must have resource for network architects, engineers and researchers who want to gain insight into optimizing network performance through the use of modeling and simulation. Discusses important and emerging topics in computer networks and Systems including but not limited to; modeling, simulation, analysis and security of wireless and mobiles networks especially as they relate to next generation wireless networks Provides the necessary methodologies, strategies and tools needed to build computer networks and systems modeling and simulation from the bottom up Includes comprehensive review and evaluation of simulation tools and methodologies and different network performance metrics including mobility, congestion, quality of service, security and more
Download or read book Systems Analysis and Simulation in Ecology written by Bernard C. Patten and published by . This book was released on 1971 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is a book of ecology in transition form a "soft" science, synecology, to a "hard" science, systems ecology" -- Preface.
Download or read book Analysis and Simulation of Noise in Nonlinear Electronic Circuits and Systems written by Alper Demir and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In electronic circuit and system design, the word noise is used to refer to any undesired excitation on the system. In other contexts, noise is also used to refer to signals or excitations which exhibit chaotic or random behavior. The source of noise can be either internal or external to the system. For instance, the thermal and shot noise generated within integrated circuit devices are in ternal noise sources, and the noise picked up from the environment through electromagnetic interference is an external one. Electromagnetic interference can also occur between different components of the same system. In integrated circuits (Ies), signals in one part of the system can propagate to the other parts of the same system through electromagnetic coupling, power supply lines and the Ie substrate. For instance, in a mixed-signal Ie, the switching activity in the digital parts of the circuit can adversely affect the performance of the analog section of the circuit by traveling through the power supply lines and the substrate. Prediction of the effect of these noise sources on the performance of an electronic system is called noise analysis or noise simulation. A methodology for the noise analysis or simulation of an electronic system usually has the following four components: 2 NOISE IN NONLINEAR ELECTRONIC CIRCUITS • Mathematical representations or models for the noise sources. • Mathematical model or representation for the system that is under the in fluence of the noise sources.
