Download or read book Systematic Approach for Cost Efficient Design and Planning with Additive Manufacturing written by Christian Lindemann and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing Change Management written by David M. Dietrich and published by CRC Press. This book was released on 2019-02-04 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) has altered manufacturing as we know it, with shortened development time, increased performance, and reduced product costs. Executive management in industry are bombarded by marketing from their competitors showcasing design solutions leveraged through AM. Therefore, executive management ask their project management teams to figure out how to utilize AM within their own company. Clueless on how to approach the problem, managers start learning about AM from experts and become overwhelmed at the highly technical information. Unlike other AM books that focus on the technical output of AM technology, this new book focuses solely on the managerial implementation. Features Presents the impacts of AM technology Provides engaging, practical, and entertaining "war stories" from the front line of AM industrialization Describes in detail, the significant hurdles in AM certification and implementation Offers templates of proven change management best practices, as practical solutions Omits the technical verbiage that gets in the way of management understanding how the process is implemented
Download or read book Technology Strategy for Metal based Additive Manufacturing written by Marc Matthias Schneck and published by utzverlag GmbH. This book was released on 2022-01-14 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Representations and Processing for Additive Manufacturing written by Marco Attene and published by Springer Nature. This book was released on 2022-06-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wide diffusion of 3D printing technologies continuously calls for effective solutions for designing and fabricating objects of increasing complexity. The so called "computational fabrication" pipeline comprises all the steps necessary to turn a design idea into a physical object, and this book describes the most recent advancements in the two fundamental phases along this pipeline: design and process planning. We examine recent systems in the computer graphics community that allow us to take a design idea from conception to a digital model, and classify algorithms that are necessary to turn such a digital model into an appropriate sequence of machining instructions.
Download or read book Cost efficient Design written by Klaus Ehrlenspiel and published by American Society of Mechanical Engineers. This book was released on 2007 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first English edition of an established work on cost-driven product design and development. It offers tried and tested methods for understanding, influencing and reducing product costs. The methodology and organization of cost management, as well as the effects on each type of cost are described. Using this knowledge the product developer can assume responsibility for costs. The numerous examples and detailed derivation of results provide the practical user with problem solutions and hints. Modern methods such as Target Costing and Simultaneous Engineering are described. Thus the book will also help the specialist who does not have the overview of the complex interrelationships in the enterprise. The work is also suited for students, as well as for practicing engineers."
Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2009-12-14 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing deals with various aspects of joining materials to form parts. Additive Manufacturing (AM) is an automated technique for direct conversion of 3D CAD data into physical objects using a variety of approaches. Manufacturers have been using these technologies in order to reduce development cycle times and get their products to the market quicker, more cost effectively, and with added value due to the incorporation of customizable features. Realizing the potential of AM applications, a large number of processes have been developed allowing the use of various materials ranging from plastics to metals for product development. Authors Ian Gibson, David W. Rosen and Brent Stucker explain these issues, as well as: Providing a comprehensive overview of AM technologies plus descriptions of support technologies like software systems and post-processing approaches Discussing the wide variety of new and emerging applications like micro-scale AM, medical applications, direct write electronics and Direct Digital Manufacturing of end-use components Introducing systematic solutions for process selection and design for AM Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing is the perfect book for researchers, students, practicing engineers, entrepreneurs, and manufacturing industry professionals interested in additive manufacturing.
Download or read book Management written by and published by . This book was released on 1983 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Additive Manufacturing Modeling Systems and 3D Prototyping written by Massimo Di Nicolantonio and published by Springer. This book was released on 2019-06-04 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.
Download or read book NASA SP 7500 written by United States. National Aeronautics and Space Administration and published by . This book was released on 1982 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. Presents laser powder bed fusion fundamentals, as well as their inherent challenges Provides an up-to-date summary of this advancing technology and its potential Provides a comprehensive textbook for universities, as well as a reference for industry Acts as quick-reference guide
Download or read book Additive Manufacturing written by Felipe Brewer and published by . This book was released on 2015 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of additive manufacturing has increased significantly in previous years. Additive manufacturing is used by multiple industry subsectors, including motor vehicles, aerospace, machinery, electronics, and medical products. Currently, however, additive manufactured products represent less than one percent of all manufactured products in the U.S. As the costs of additive manufacturing systems decrease, this technology may change the way that consumers interact with producers. Additive manufacturing technology opens up new opportunities for the economy and society. It can facilitate the customized production of strong light-weight products and it allows designs that were not possible with previous manufacturing techniques. This book provides aggregate manufacturing industry data and industry subsector data to develop a quantitative depiction of the U.S. additive manufacturing industry.
Download or read book SPS2022 written by A.H.C. Ng and published by IOS Press. This book was released on 2022-05-17 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realization of a successful product requires collaboration between developers and producers, taking account of stakeholder value, reinforcing the contribution of industry to society and enhancing the wellbeing of workers while respecting planetary boundaries. Founded in 2006, the Swedish Production Academy (SPA) aims to drive and develop production research and education and to increase cooperation within the production area. This book presents the proceedings of the 10th Swedish Production Symposium (SPS2022), held in Skövde, Sweden, from 26-29 April 2022. The overall theme of the symposium was ‘Industry 5.0 Transformation – Towards a Sustainable, Human-Centric, and Resilient Production’. Since its inception in 2007, the purpose of SPS has been to facilitate an event at which members and interested participants from industry and academia can meet to exchange ideas. The 69 papers accepted for presentation here are grouped into ten sections: resource-efficient production; flexible production; humans in the production system; circular production systems and maintenance; integrated product and production development; industrial optimization and decision-making; cyber-physical production systems and digital twins; innovative production processes and additive manufacturing; smart and resilient supply chains; and linking research and education. Also included are three sections covering the Special Sessions at SPS2022: artificial intelligence and industrial analytics in industry 4.0; development of resilient and sustainable production systems; and boundary crossing and boundary objects in product and production development. The book will be of interest to all those involved in the development and production of future products.
Download or read book Systems Engineering for the Digital Age written by Dinesh Verma and published by John Wiley & Sons. This book was released on 2023-09-26 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Engineering for the Digital Age Comprehensive resource presenting methods, processes, and tools relating to the digital and model-based transformation from both technical and management views Systems Engineering for the Digital Age: Practitioner Perspectives covers methods and tools that are made possible by the latest developments in computational modeling, descriptive modeling languages, semantic web technologies, and describes how they can be integrated into existing systems engineering practice, how best to manage their use, and how to help train and educate systems engineers of today and the future. This book explains how digital models can be leveraged for enhancing engineering trades, systems risk and maturity, and the design of safe, secure, and resilient systems, providing an update on the methods, processes, and tools to synthesize, analyze, and make decisions in management, mission engineering, and system of systems. Composed of nine chapters, the book covers digital and model-based methods, digital engineering, agile systems engineering, improving system risk, and more, representing the latest insights from research in topics related to systems engineering for complicated and complex systems and system-of-systems. Based on validated research conducted via the Systems Engineering Research Center (SERC), this book provides the reader a set of pragmatic concepts, methods, models, methodologies, and tools to aid the development of digital engineering capability within their organization. Systems Engineering for the Digital Age: Practitioner Perspectives includes information on: Fundamentals of digital engineering, graphical concept of operations, and mission and systems engineering methods Transforming systems engineering through integrating M&S and digital thread, and interactive model centric systems engineering The OODA loop of value creation, digital engineering measures, and model and data verification and validation Digital engineering testbed, transformation, and implications on decision making processes, and architecting tradespace analysis in a digital engineering environment Expedited systems engineering for rapid capability and learning, and agile systems engineering framework Based on results and insights from a research center and providing highly comprehensive coverage of the subject, Systems Engineering for the Digital Age: Practitioner Perspectives is written specifically for practicing engineers, program managers, and enterprise leadership, along with graduate students in related programs of study.
Download or read book Engineering Design written by Gerhard Pahl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aIm of the first two German editions of our book Kon struktionslehre (Engineering Design) was to present a comprehensive, consistent and clear approach to systematic engineering design. The book has been translated into five languages, making it a standard international reference of equal importance for improving the design methods of practising designers in industry and for educating students of mechanical engineering design. Although the third German edition conveys essentially the same message, it contains additional knowledge based on further findings from design research and from the application of systematic design methods in practice. The latest references have also been included. With these additions the book achieves all our aims and represents the state of the art. Substantial sections remain identical to the previous editions. The main extensions include: - a discussion of cognitive psychology, which enhances the creativity of design work; - enhanced methods for product planning; - principles of design for recycling; - examples of well-known machine elements*; - special methods for quality assurance; and - an up-to-date treatment of CAD*.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book Progress in Digital and Physical Manufacturing written by Joel Oliveira Correia Vasco and published by Springer Nature. This book was released on 2023-06-14 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers presented at the second international Conference on Progress in Digital and Physical Manufacturing (ProDPM'21), organized by the School of Technology and Management (ESTG) of the Polytechnic Institute of Leiria (IPL), from the 27th to 29th of October 2021. It represents a significant contribution to the current advances in digital and physical manufacturing issues as it contains topical research in this field. The book is an essential reading for all of those working on digital and physical manufacturing, promoting better links between the academia and the industry. The conference papers cover a wide range of important topics like biomanufacturing, advanced rapid prototyping technologies, rapid tooling and manufacturing, micro-fabrication, 3D CAD and data acquisition, and collaborative design.
