Download or read book System level Modeling of MEMS written by Oliver Brand and published by John Wiley & Sons. This book was released on 2012-12-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-level modeling of MEMS - microelectromechanical systems - comprises integrated approaches to simulate, understand, and optimize the performance of sensors, actuators, and microsystems, taking into account the intricacies of the interplay between mechanical and electrical properties, circuitry, packaging, and design considerations. Thereby, system-level modeling overcomes the limitations inherent to methods that focus only on one of these aspects and do not incorporate their mutual dependencies. The book addresses the two most important approaches of system-level modeling, namely physics-based modeling with lumped elements and mathematical modeling employing model order reduction methods, with an emphasis on combining single device models to entire systems. At a clearly understandable and sufficiently detailed level the readers are made familiar with the physical and mathematical underpinnings of MEMS modeling. This enables them to choose the adequate methods for the respective application needs. This work is an invaluable resource for all materials scientists, electrical engineers, scientists working in the semiconductor and/or sensor industry, physicists, and physical chemists.

Download or read book Microelectromechanical Systems and Devices written by Nazmul Islam and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators.

Download or read book MEMS Mechanical Sensors written by Stephen Beeby and published by Artech House. This book was released on 2004 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Engineers and researchers can turn to this reference time and time again when they need to overcome challenges in design, simulation, fabrication, and application of MEMS (microelectromechanical systems) sensors.

Download or read book Nanotechnology for Telecommunications written by Sohail Anwar and published by CRC Press. This book was released on 2017-12-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its unique promise to revolutionize science, engineering, technology, and other fields, nanotechnology continues to profoundly impact associated materials, components, and systems, particularly those used in telecommunications. These developments are leading to easier convergence of related technologies, massive storage data, compact storage devices, and higher-performance computing. Nanotechnology for Telecommunications presents vital technical scientific information to help readers grasp issues and challenges associated with nanoscale telecommunication system development and commercialization—and then avail themselves of the many opportunities to be gleaned. This book provides technical information and research ideas regarding the use of nanotechnology in telecommunications and information processing, reflecting the continuing trend toward the use of optoelectronics. Nanotech will eventually lead to a technology cluster that offers a complete range of functionalities for systems used in domains including information, energy, construction, environmental, and biomedical. Describing current and future developments that hold promise for significant innovations in telecommunications, this book is organized to provide a progressive understanding of topics including: Background information on nanoscience and nanotechnology Specific applications of nanotechnology in telecommunications Nanostructured optoelectronic materials MEMS, NEMS, and their applications in communication systems Quantum dot Cellular Automata (QCA) and its applications in telecommunication systems How nonohmic nonlinear behavior affects both digital and analog signal processing Concepts regarding quantum switching and its applications in quantum networks The scale of the physical systems that use nanoscale electronic devices is still large, and that presents serious challenges to the establishment of interconnections between nanoscale devices and the outside world. Also addressing consequent social implications of nanotech, this book reviews a broad range of the nano concepts and their influence on every aspect of telecommunications. It describes the different levels of interconnections in systems and details the standardized assembly process for a broad specrum of micro-, nano-, bio-, fiber-optic, and optoelectronic components and functions. This book is a powerful tool for understanding how to harness the power of nanotech through integration of materials, processes, devices, and applications.

Download or read book Smart Systems Integration and Simulation written by Nicola Bombieri and published by Springer. This book was released on 2016-02-17 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book-presents new methods and tools for the integration and simulation of smart devices. The design approach described in this book explicitly accounts for integration of Smart Systems components and subsystems as a specific constraint. It includes methodologies and EDA tools to enable multi-disciplinary and multi-scale modeling and design, simulation of multi-domain systems, subsystems and components at all levels of abstraction, system integration and exploration for optimization of functional and non-functional metrics. By covering theoretical and practical aspects of smart device design, this book targets people who are working and studying on hardware/software modelling, component integration and simulation under different positions (system integrators, designers, developers, researchers, teachers, students etc.). In particular, it is a good introduction to people who have interest in managing heterogeneous components in an efficient and effective way on different domains and different abstraction levels. People active in smart device development can understand both the current status of practice and future research directions. · Provides a comprehensive overview of smart systems design, focusing on design challenges and cutting-edge solutions; · Enables development of a co-simulation and co-design environment that accounts for the peculiarities of the basic subsystems and components to be integrated; · Describes development of modeling and design techniques, methods and tools that enable multi-domain simulation and optimization at various levels of abstraction and across different technological domains.

Download or read book Micro Electro Mechanical System Design written by James J. Allen and published by CRC Press. This book was released on 2005-07-08 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is challenging at best to find a resource that provides the breadth of information necessary to develop a successful micro electro mechanical system (MEMS) design. Micro Electro Mechanical System Design is that resource. It is a comprehensive, single-source guide that explains the design process by illustrating the full range of issues involved,

Download or read book Design Technology for Heterogeneous Embedded Systems written by Gabriela Nicolescu and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design technology to address the new and vast problem of heterogeneous embedded systems design while remaining compatible with standard “More Moore” flows, i.e. capable of simultaneously handling both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today and will be for several years to come. While the micro-electronics industry, over the years and with its spectacular and unique evolution, has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. Heterogeneous Embedded Systems, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a necessarily broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical level, signal representations and different abstraction levels, architectures and components based on hardware and software, in all the main phases of design (modeling, validation with multiple models of computation, synthesis and optimization). It concentrates on the specific issues at the interfaces, and is divided into two main parts. The first part examines mainly theoretical issues and focuses on the modeling, validation and design techniques themselves. The second part illustrates the use of these methods in various design contexts at the forefront of new technology and architectural developments.

Download or read book Microflows and Nanoflows written by George Karniadakis and published by Springer Science & Business Media. This book was released on 2006-02-09 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subject area has witnessed explosive growth during the last decade and the technology is progressing at an astronomical rate. Previous edition was first to focus exclusively on flow physics within microdevices. It sold over 900 copies in North America since 11/01. New edition is 40 percent longer, with four new chapters on recent topics including Nanofluidics.

Download or read book MOEMS written by M. Edward Motamedi and published by SPIE Press. This book was released on 2005 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the exciting and fast-moving field of MOEMS to graduate students, scientists, and engineers by providing a foundation of both micro-optics and MEMS that will enable them to conduct future research in the field. Born from the relatively new fields of MEMS and micro-optics, MOEMS are proving to be an attractive and low-cost solution to a range of device problems requiring high optical functionality and high optical performance. MOEMS solutions include optical devices for telecommunication, sensing, and mobile systems such as v-grooves, gratings, shutters, scanners, filters, micromirrors, switches, alignment aids, lens arrays, and hermetic wafer-scale optical packaging. An international team of leading researchers contributed to this book, and it presents examples and problems employing cutting-edge MOEM devices. It will inspire researchers to further advance the design, fabrication, and analysis of MOEM systems.

Download or read book Computational Nanotechnology written by Sarhan M. Musa and published by CRC Press. This book was released on 2018-09-03 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of nanotechnology continue to fuel significant innovations in areas ranging from electronics, microcomputing, and biotechnology to medicine, consumer supplies, aerospace, and energy production. As progress in nanoscale science and engineering leads to the continued development of advanced materials and new devices, improved methods of modeling and simulation are required to achieve a more robust quantitative understanding of matter at the nanoscale. Computational Nanotechnology: Modeling and Applications with MATLAB® provides expert insights into current and emerging methods, opportunities, and challenges associated with the computational techniques involved in nanoscale research. Written by, and for, those working in the interdisciplinary fields that comprise nanotechnology—including engineering, physics, chemistry, biology, and medicine—this book covers a broad spectrum of technical information, research ideas, and practical knowledge. It presents an introduction to computational methods in nanotechnology, including a closer look at the theory and modeling of two important nanoscale systems: molecular magnets and semiconductor quantum dots. Topics covered include: Modeling of nanoparticles and complex nano and MEMS systems Theory associated with micromagnetics Surface modeling of thin films Computational techniques used to validate hypotheses that may not be accessible through traditional experimentation Simulation methods for various nanotubes and modeling of carbon nanotube and silicon nanowire transistors In regard to applications of computational nanotechnology in biology, contributors describe tracking of nanoscale structures in cells, effects of various forces on cellular behavior, and use of protein-coated gold nanoparticles to better understand protein-associated nanomaterials. Emphasizing the importance of MATLAB for biological simulations in nanomedicine, this wide-ranging survey of computational nanotechnology concludes by discussing future directions in the field, highlighting the importance of the algorithms, modeling software, and computational tools in the development of efficient nanoscale systems.

Download or read book The Incredible Shrinking Bee written by James V Lawry and published by World Scientific. This book was released on 2006-02-22 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because vertebrate circulations do not work when shrunk to insect sizes, insects may help us design our smallest machines. Within small bodies, bees separate diffusing substances in an open cavity assisted by locomotion and the beat of the heart. The open arthropod circulation, however, is most efficient when shrunk until its large three-dimensional volume of blood turns into a two-dimensional film of fluid covering only the internal surfaces. This transformation increases the chances to near-certainty that molecules can diffuse from one point to another without getting lost. The Incredible Shrinking Bee expresses mathematics in words so that most readers can compare today's microelectromechanical (MEMS) devices with a honeybee's circulation, introducing ideas of biominiaturization to workers interested in developing compact energy and chemical systems. When it comes to shrinking systems, bees have the edge on human ingenuity. A farrago of ideas and disciplines, The Incredible Shrinking Bee provides a springboard for discussion and research for computer scientists, entomologists, systems biologists, physiologists, mathematicians, engineers and anyone wanting to learn how bees move things around in their bodies to do what we are trying to do smaller and better. Contents: What's in This BookBees and DevicesBeauty Before the BeastYou Can't Shrink a WomanBee's BodyCavity TransportWhere the Hemolymph Meets the WallShrinkingChancy TransportControlGoals and Conclusions Readership: Systems biologists, physiologists, mathematicians, engineers, computer scientists, entomologists and zoologists. Key Features:A generalist's response to the scientific expertise gapUniquely combines disciplinesCompares insects with microdevicesRelies on the Internet for expanding and updating terms, illustrations and conceptsKeywords:Microsystems;Modeling;Biomimetrics;Synthetic Biology;Insects;Microdevices;Microphysics;Systems Biology;Biomedical;Microtechnology

Download or read book Applications written by Peter Benner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-12-07 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing complexity of models used to predict real-world systems leads to the need for algorithms to replace complex models with far simpler ones, while preserving the accuracy of the predictions. This three-volume handbook covers methods as well as applications. This third volume focuses on applications in engineering, biomedical engineering, computational physics and computer science.

Download or read book Microelectromechanical Systems written by Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems and published by National Academies Press. This book was released on 1997-12-15 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to tolerances of 100-billionths of a meter. The MEMS revolution harnesses the integrated circuitry know-how to build working microsystems from micromechanical and microelectronic elements. MEMS is a multidisciplinary field involving challenges and opportunites for electrical, mechanical, chemical, and biomedical engineering as well as physics, biology, and chemistry. As MEMS begin to permeate more and more industrial procedures, society as a whole will be strongly affected because MEMS provide a new design technology that could rival--perhaps surpass--the societal impact of integrated circuits.

Download or read book Optimal Synthesis Methods for MEMS written by S.G.K. Ananthasuresh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of "microelectromechanical systems," or "MEMS," has gradually evolved from a "discipline" populated by a small group of researchers to an "enabling technology" supporting a variety of products in such diverse areas as mechanical and inertial sensors, optical projection displays, telecommunications equipment, and biology and medicine. Critical to the success of these products is the ability to design them, and this invariably involves detailed modeling of proposed designs. Over the past twenty years, such modeling has become increasingly sophisticated, with full suites of MEMS-oriented computer-aided-design tools now available worldwide. But there is another equally important side to the design process In my own book, Microsystem figuring out what to build in the first place. Design, I chose to emphasize the modeling aspect of design. The task of figuring out what to build was defined by a vague step called "creative thinking." I used practical product examples to illustrate the many subtle characteristics of successful designs, but I made no attempt to systematize the generation ofdesign proposals or optimized designs. That systemization is called "synthesis," which is the subjectofthis book.

Download or read book Mechanics of Microsystems written by Alberto Corigliano and published by John Wiley & Sons. This book was released on 2018-04-02 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Microsystems Alberto Corigliano, Raffaele Ardito, Claudia Comi, Attilio Frangi, Aldo Ghisi and Stefano Mariani, Politecnico di Milano, Italy A mechanical approach to microsystems, covering fundamental concepts including MEMS design, modelling and reliability Mechanics of Microsystems takes a mechanical approach to microsystems and covers fundamental concepts including MEMS design, modelling and reliability. The book examines the mechanical behaviour of microsystems from a ‘design for reliability’ point of view and includes examples of applications in industry. Mechanics of Microsystems is divided into two main parts. The first part recalls basic knowledge related to the microsystems behaviour and offers an overview on microsystems and fundamental design and modelling tools from a mechanical point of view, together with many practical examples of real microsystems. The second part covers the mechanical characterization of materials at the micro-scale and considers the most important reliability issues (fracture, fatigue, stiction, damping phenomena, etc) which are fundamental to fabricate a real working device. Key features: Provides an overview of MEMS, with special focus on mechanical-based Microsystems and reliability issues. Includes examples of applications in industry. Accompanied by a website hosting supplementary material. The book provides essential reading for researchers and practitioners working with MEMS, as well as graduate students in mechanical, materials and electrical engineering.

Download or read book Plunkett s Nanotechnology Mems Industry Almanac 2008 Nanotechnology Mems Industry Market Research Statistics Trends Leading Companies written by Jack W. Plunkett and published by Plunkett Research, Ltd.. This book was released on 2008-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechology has applications within biotechnology, manufacturing, aerospace, information systems and many other fields. This book covers such nanotechnology business topics as micro-electro-mechanical systems, microengineering, microsystems, microsensors, and carbon tubes. It also includes statistical tables, an industry glossary and indexes.

Download or read book The MEMS Handbook written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2001-09-27 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolution is well underway. Our understanding and utilization of microelectromechanical systems (MEMS) are growing at an explosive rate with a worldwide market approaching billions of dollars. In time, microdevices will fill the niches of our lives as pervasively as electronics do right now. But if these miniature devices are to fulfill their mammoth potential, today's engineers need a thorough grounding in the underlying physics, modeling techniques, fabrication methods, and materials of MEMS. The MEMS Handbook delivers all of this and more. Its team of authors-unsurpassed in their experience and standing in the scientific community- explore various aspects of MEMS: their design, fabrication, and applications as well as the physical modeling of their operations. Designed for maximum readability without compromising rigor, it provides a current and essential overview of this fledgling discipline.