Download or read book System Impact of Silicon Carbide Power Electronics on Hybrid Electric Vehicle Applications written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of silicon carbide- (SiC- ) based power semiconductor switches with their superior features compared with silicon (Si) based switches has resulted in substantial improvements in the performance of power electronics converter systems. These systems with SiC power devices are more compact, lighter, and more efficient, so they are ideal for high-voltage power electronics applications including hybrid electric vehicle (HEV) power converters. In this dissertation, first, a power supply converter and a traction drive converter of an HEV are selected and then, the impact of SiC-based power devices on these converters is investigated. Reductions in heatsink size and device losses with the increase in the efficiency are analyzed using an averaging model of a three-phase PWM inverter in the traction drive. In addition to these, the reductions in the filter and transformer size for the power supply are also included. For more accurate results, experimental data, and/or device physics are taken into consideration to model power diodes and MPSFETs. Finally, suggestions of parameter modification to design better perrforming application specific power devices are made after a parametric study of the devices.
Download or read book Transients of Modern Power Electronics written by Hua Bai and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In high power, high voltage electronics systems, a strategy to manage short timescale energy imbalances is fundamental to the system reliability. Without a theoretical framework, harmful local convergence of energy can affect the dynamic process of transformation, transmission, and storage which create an unreliable system. With an original approach that encourages understanding of both macroscopic and microscopic factors, the authors offer a solution. They demonstrate the essential theory and methodology for the design, modeling and prototyping of modern power electronics converters to create highly effective systems. Current applications such as renewable energy systems and hybrid electric vehicles are discussed in detail by the authors. Key features: offers a logical guide that is widely applicable to power electronics across power supplies, renewable energy systems, and many other areas analyses the short-scale (nano-micro second) transient phenomena and the transient processes in nearly all major timescales, from device switching processes at the nanoscale level, to thermal and mechanical processes at second level explores transient causes and shows how to correct them by changing the control algorithm or peripheral circuit includes two case studies on power electronics in hybrid electric vehicles and renewable energy systems Practitioners in major power electronic companies will benefit from this reference, especially design engineers aiming for optimal system performance. It will also be of value to faculty staff and graduate students specializing in power electronics within academia.
Download or read book Frontiers In Electronics Future Chips Proceedings Of The 2002 Workshop On Frontiers In Electronics Wofe 02 written by Yoon Soo Park and published by World Scientific. This book was released on 2003-01-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2002 Workshop on Frontiers in Electronics was the third in the series of WOFE workshops. Over 70 leading experts from academia, industry, and government agencies reported on the most recent developments in their fields and exchanged views on future trends and directions of the electronics and photonics industry. The issues they addressed ranged from system-on-chip to DNA doping, from ultrathin SOI to electrotextiles, from photonics integration on the ULSI platform to wide band gap semiconductor devices and solid state lighting. The rapid pace of electronic technology evolution compels a merger of different technical areas, and WOFE-02 provided a unique opportunity for cross-fertilization of the emerging fields of microelectronics, photonics, and nanoelectronics. The workshop was informal and stimulated provocative views, visionary outlooks, and discussions on controversial issues.
Download or read book Gallium Nitride And Silicon Carbide Power Devices written by B Jayant Baliga and published by World Scientific Publishing Company. This book was released on 2016-12-12 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last 30 years, significant progress has been made to improve our understanding of gallium nitride and silicon carbide device structures, resulting in experimental demonstration of their enhanced performances for power electronic systems. Gallium nitride power devices made by the growth of the material on silicon substrates have gained a lot of interest. Power device products made from these materials have become available during the last five years from many companies.This comprehensive book discusses the physics of operation and design of gallium nitride and silicon carbide power devices. It can be used as a reference by practicing engineers in the power electronics industry and as a textbook for a power device or power electronics course in universities.
Download or read book Modern Silicon Carbide Power Devices written by B Jayant Baliga and published by . This book was released on 2023-09-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide power devices are being increasingly adopted for many applications such as electric vehicles and charging stations. There is a large demand for a resource to learn and understand the basic physics of operation of these devices to create engineers with in depth knowledge about them.This unique compendium provides a comprehensive design guide for Silicon Carbide power devices. It systematically describes the device structures and analytical models for computing their characteristics. The device structures included are the Schottky diode, JBS rectifier, power MOSFET, JBSFET, IGBT and BiDFET. Unique structures that address achieving excellent voltage blocking and on-resistance are emphasized.This useful textbook and reference innovations for achieving superior high frequency operation and highlights manufacturing technology for the devices. The book will benefit professionals, academics, researchers and graduate students in the fields of electrical and electronic engineering, circuits and systems, semiconductors, and energy studies.
Download or read book Silicon Carbide Volume 2 written by Peter Friedrichs and published by Wiley-VCH. This book was released on 2009-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide - this easy to manufacture compound of silicon and carbon is said to be THE emerging material for applications in electronics. High thermal conductivity, high electric field breakdown strength and high maximum current density make it most promising for high-powered semiconductor devices. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a substrate material for the manufacture of controlled graphene. SiC and graphene research is oriented towards end markets and has high impact on areas of rapidly growing interest like electric vehicles. This volume is devoted to high power devices products and their challenges in industrial application. Readers will benefit from reports on development and reliability aspects of Schottky barrier diodes, advantages of SiC power MOSFETs, or SiC sensors. The authors discuss MEMS and NEMS as SiC-based electronics for automotive industry as well as SiC-based circuit elements for high temperature applications, and the application of transistors in PV-inverters. The list of contributors reads like a "Who's Who" of the SiC community, strongly benefiting from collaborations between research institutions and enterprises active in SiC crystal growth and device development. Among the former are CREE Inc. and Fraunhofer ISE, while the industry is represented by Toshiba, Nissan, Infineon, NASA, Naval Research Lab, and Rensselaer Polytechnic Institute, to name but a few.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Silicon Carbide Volume 2 written by Peter Friedrichs and published by John Wiley & Sons. This book was released on 2011-04-08 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide - this easy to manufacture compound of silicon and carbon is said to be THE emerging material for applications in electronics. High thermal conductivity, high electric field breakdown strength and high maximum current density make it most promising for high-powered semiconductor devices. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a substrate material for the manufacture of controlled graphene. SiC and graphene research is oriented towards end markets and has high impact on areas of rapidly growing interest like electric vehicles. This volume is devoted to high power devices products and their challenges in industrial application. Readers will benefit from reports on development and reliability aspects of Schottky barrier diodes, advantages of SiC power MOSFETs, or SiC sensors. The authors discuss MEMS and NEMS as SiC-based electronics for automotive industry as well as SiC-based circuit elements for high temperature applications, and the application of transistors in PV-inverters. The list of contributors reads like a "Who's Who" of the SiC community, strongly benefiting from collaborations between research institutions and enterprises active in SiC crystal growth and device development. Among the former are CREE Inc. and Fraunhofer ISE, while the industry is represented by Toshiba, Nissan, Infineon, NASA, Naval Research Lab, and Rensselaer Polytechnic Institute, to name but a few.
Download or read book Power Electronics in Renewable Energy Systems written by Teuvo Suntio and published by MDPI. This book was released on 2019-06-24 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of 30 scientific papers which address the problems associated with the use of power electronic converters in renewable energy source-based systems. Relevant problems associated with the use of power electronic converters to integrate renewable energy systems to the power grid are presented. Some of the covered topics relate to the integration of photovoltaic and wind energy generators into the rest of the system, and to the use of energy storage to mitigate power fluctuations, which are a characteristic of renewable energy systems. The book provides a good overview of the abovementioned topics.
Download or read book Modern Silicon Carbide Power Devices written by B Jayant Baliga and published by World Scientific. This book was released on 2023-09-18 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide power devices are being increasingly adopted for many applications such as electric vehicles and charging stations. There is a large demand for a resource to learn and understand the basic physics of operation of these devices to create engineers with in depth knowledge about them.This unique compendium provides a comprehensive design guide for Silicon Carbide power devices. It systematically describes the device structures and analytical models for computing their characteristics. The device structures included are the Schottky diode, JBS rectifier, power MOSFET, JBSFET, IGBT and BiDFET. Unique structures that address achieving excellent voltage blocking and on-resistance are emphasized.This useful textbook and reference innovations for achieving superior high frequency operation and highlights manufacturing technology for the devices. The book will benefit professionals, academics, researchers and graduate students in the fields of electrical and electronic engineering, circuits and systems, semiconductors, and energy studies.
Download or read book Energy Efficiency in Electric Motors Drives Power Converters and Related Systems written by Mario Marchesoni and published by MDPI. This book was released on 2020-06-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, there is a great deal of attention focused on sustainable growth worldwide. The increase in efficiency in the use of energy may even, in this historical moment, bring greater benefit than the use of renewable energies. Electricity appears to be the most sustainable of energies and the most promising hope for a planet capable of growing without compromising its own health and that of its inhabitants. Power electronics and electrical drives are the key technologies that will allow energy savings through the reduction of energy losses in many applications. This Special Issue has collected several scientific contributions related to energy efficiency in electrical equipment. Some articles are dedicated to the use and optimization of permanent magnet motors, which allow obtaining the highest level of efficiency. Most of the contributions describe the energy improvements that can be achieved with power electronics and the use of suitable control techniques. Last but not least, some articles describe interesting solutions for hybrid vehicles, which were created mainly to save energy in the smartest way possible.
Download or read book Electronic Components and Systems for Automotive Applications written by Jochen Langheim and published by Springer. This book was released on 2019-05-25 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects selected papers of the 5th CESA Automotive Electronics Congress, Paris, 2018. CESA is the most important automotive electronics conference in France. The topical focus lies on state-of-the-art automotive electronics with respect to energy consumption and autonomous driving. The target audience primarily comprises industry leaders and research experts in the automotive industry.
Download or read book Silicon Carbide 2008 materials Processing and Devices written by Michael Dudley and published by . This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Communication Smart Technologies and Innovation for Society written by Álvaro Rocha and published by Springer Nature. This book was released on 2021-09-27 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality papers presented at International Conference on Science, Technology and Innovation for Society (CITIS 2021), held in Guayaquil, Ecuador, on May 26–28, 2021. This book will present the recent research trends in the fields of software engineering, big data analysis, cloud computing, data engineering, data management and data mining, machine learning, deep learning, artificial intelligence, smart systems, robotics and automation, mechatronic design, and industrial processes design.
Download or read book Energy Storage Systems and Power Conversion Electronics for E Transportation and Smart Grid written by Sergio Saponara and published by MDPI. This book was released on 2020-12-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint in book form of the Energies MDPI Journal Special Issue , entitled “Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid”. The Special Issue was managed by two Guest Editors from Italy and Norway: Professor Sergio Saponara from the University of Pisa and Professor Lucian MIHET-POPA from Østfold University College, in close cooperation with the Editors from Energies. The papers published in this SI are related to the emerging trends in energy storage and power conversion electronic circuits and systems, with a specific focus on transportation electrification, and on the evolution from the electric grid to a smart grid. An extensive exploitation of renewable energy sources is foreseen for the smart grid, as well as a close integration with the energy storage and recharging systems of the electrified transportation era. Innovations at the levels of both algorithmic and hardware (i.e., power converters, electric drives, electronic control units (ECU), energy storage modules and charging stations) are proposed. Research and technology transfer activities in energy storage systems, such as batteries and super/ultra-capacitors, are essential for the success of electric transportation, and to foster the use of renewable energy sources. Energy storage systems are the key technology to solve these issues, and to increase the adoption of renewable energy sources in the smart grid.
Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2011-05-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Hybrid Electric Vehicles provides vital guidance to help a new generation of engineers master the principles of and further advance hybrid vehicle technology. The authors address purely electric, hybrid electric, plug-in hybrid electric, hybrid hydraulic, fuel cell, and off-road hybrid vehicle systems. They focus on the power and propulsion systems for these vehicles, including issues related to power and energy management. They concentrate on material that is not readily available in other hybrid electric vehicle (HEV) books such as design examples for hybrid vehicles, and cover new developments in the field including electronic CVT, plug-in hybrid, and new power converters and controls. Covers hybrid vs. pure electric, HEV system architecture (including plug-in and hydraulic), off-road and other industrial utility vehicles, non-ground-vehicle applications like ships, locomotives, aircrafts, system reliability, EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Contains core fundamentals and principles of modern hybrid vehicles at component level and system level. Provides graduate students and field engineers with a text suitable for classroom teaching or self-study.
Download or read book Silicon Carbide written by Peter Friedrichs and published by John Wiley & Sons. This book was released on 2011-04-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. Its physical properties make it more promising for high-powered devices than silicon. The volume is devoted to the material and covers methods of epitaxial and bulk growth. Identification and characterization of defects is discussed in detail. The contributions help the reader to develop a deeper understanding of defects by combining theoretical and experimental approaches. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a substrate material for the manufacture of controlled graphene. SiC and graphene research is oriented towards end markets and has high impact on areas of rapidly growing interest like electric vehicles. The list of contributors reads like a "Who's Who" of the SiC community, strongly benefiting from collaborations between research institutions and enterprises active in SiC crystal growth and device development.
