Download or read book System Identification of a Hydraulically actuated Robot written by Andreas Otto Ranz and published by . This book was released on 1991 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulically Actuated Hexapod Robots written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legged robots are a promising locomotion system, capable of performing tasks that conventional vehicles cannot. Even more exciting is the fact that this is a rapidly developing field of study for researchers from a variety of disciplines. However, only a few books have been published on the subject of multi-legged robots. The main objective of this book is to describe some of the major control issues concerning walking robots that the authors have faced over the past 10 years. A second objective is to focus especially on very large hydraulically driven hexapod robot locomotion weighing more than 2,000 kg, making this the first specialized book on this topic. The 10 chapters of the book touch on diverse relevant topics such as design aspects, implementation issues, modeling for control, navigation and control, force and impedance control-based walking, fully autonomous walking, walking and working tasks of hexapod robots, and the future of walking robots. The construction machines of the future will very likely resemble hydraulically driven hexapod robots like the ones described in this book – no longer science fiction but now a reality.

Download or read book System Identification of Model Parameters for a Four Degree of Freedom Hydraulically Powered Robot written by Donald Erle Foley and published by . This book was released on 1987 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulically Actuated Hexapod Robots written by Kenzo Nonami and published by Springer. This book was released on 2016-09-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legged robots are a promising locomotion system, capable of performing tasks that conventional vehicles cannot. Even more exciting is the fact that this is a rapidly developing field of study for researchers from a variety of disciplines. However, only a few books have been published on the subject of multi-legged robots. The main objective of this book is to describe some of the major control issues concerning walking robots that the authors have faced over the past 10 years. A second objective is to focus especially on very large hydraulically driven hexapod robot locomotion weighing more than 2,000 kg, making this the first specialized book on this topic. The 10 chapters of the book touch on diverse relevant topics such as design aspects, implementation issues, modeling for control, navigation and control, force and impedance control-based walking, fully autonomous walking, walking and working tasks of hexapod robots, and the future of walking robots. The construction machines of the future will very likely resemble hydraulically driven hexapod robots like the ones described in this book – no longer science fiction but now a reality.

Download or read book Robotic Systems written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics is a modern interdisciplinary field that has emerged from the marriage of computerized numerical control and remote manipulation. Today's robotic systems have intelligence features, and are able to perform dexterous and intelligent human-like actions through appropriate combination of learning, perception, planning, decision making and control. This book presents advanced concepts, techniques and applications reflecting the experience of a wide group of specialists in the field. Topics include: kinematics, dynamics, path planning and tracking, control, mobile robotics, navigation, robot programming, and sophisticated applications in the manufacturing, medical, and other areas.

Download or read book Adaptive Control Algorithms for a Hydraulically Actuated Robot written by S. Ananthakrishnan and published by . This book was released on 1988 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book True Digital Control written by C. James Taylor and published by John Wiley & Sons. This book was released on 2013-05-29 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: True Digital Control: Statistical Modelling andNon–Minimal State Space Designdevelops a true digitalcontrol design philosophy that encompasses data–basedmodel identification, through to control algorithm design,robustness evaluation and implementation. With a heritage from bothclassical and modern control system synthesis, this book issupported by detailed practical examples based on theauthors’ research into environmental, mechatronic and roboticsystems. Treatment of both statistical modelling and control designunder one cover is unusual and highlights the important connectionsbetween these disciplines. Starting from the ubiquitous proportional–integralcontroller, and with essential concepts such as pole assignmentintroduced using straightforward algebra and block diagrams, thisbook addresses the needs of those students, researchers andengineers, who would like to advance their knowledge of controltheory and practice into the state space domain; and academics whoare interested to learn more about non–minimal state variablefeedback control systems. Such non–minimal state feedback isutilised as a unifying framework for generalised digital controlsystem design. This approach provides a gentle learning curve, fromwhich potentially difficult topics, such as optimal, stochastic andmultivariable control, can be introduced and assimilated in aninteresting and straightforward manner. Key features: Covers both system identification and control systemdesign in a unified manner Includes practical design case studies and simulationexamples Considers recent research into time–variable andstate–dependent parameter modelling and control, essentialelements of adaptive and nonlinear control system design, and thedelta–operator (the discrete–time equivalent of thedifferential operator) systems Accompanied by a website hosting MATLAB examples True Digital Control: Statistical Modelling andNon–Minimal State Space Design is a comprehensive andpractical guide for students and professionals who wish to furthertheir knowledge in the areas of modern control and systemidentification.

Download or read book Flexible Robot Dynamics and Controls written by Rush D. Robinett III and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of over ten (10) years of research and development in flexible robots and structures at Sandia National Laboratories. The authors de cided to collect this wealth of knowledge into a set of viewgraphs in order to teach a graduate class in Flexible Robot Dynamics and Controls within the Mechanical En gineering Department at the University of New Mexico (UNM). These viewgraphs, encouragement from several students, and many late nights have produced a book that should provide an upper-level undergraduate and graduate textbook and a reference for experienced professionals. The content of this book spans several disciplines including structural dynam ics, system identification, optimization, and linear, digital, and nonlinear control theory which are developed from several points of view including electrical, me chanical, and aerospace engineering as well as engineering mechanics. As a result, the authors believe that this book demonstrates the value of solid applied theory when developing hardware solutions to real world problems. The reader will find many real world applications in this book and will be shown the applicability of these techniques beyond flexible structures which, in turn, shows the value of mul tidisciplinary education and teaming.

Download or read book Modeling Analysis and Control of Hydraulic Actuator for Forging written by Xinjiang Lu and published by Springer. This book was released on 2017-12-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes load modeling approaches for complex work pieces and batch forgings, and demonstrates analytical modeling and data-driven modeling approaches for known and unknown complex forging processes. It overcomes the current shortcomings of modeling, analysis and control approaches, presenting contributions in three major areas: In the first, several novel modeling approaches are proposed: a process/shape-decomposition modeling method to help estimate the deformation force; an online probabilistic learning machine for the modeling of batch forging processes; and several data-driven identification and modeling approaches for unknown forging processes under different work conditions. The second area develops model-based dynamic analysis methods to derive the conditions of stability and creep. Lastly, several novel intelligent control methods are proposed for complex forging processes. One of the most serious problems in forging forming involves the inaccurate forging conditions, velocity and position offered by the hydraulic actuator due to the complexity of both the deformation process of the metal work piece and the motion process of the hydraulic actuator. The book summarizes the current weaknesses of modeling, analysis and control approaches. are summarized as follows: a) With the current modeling approaches it is difficult to model complex forging processes with unknown parameters, as they only model the dynamics in local working areas but do not effectively model unknown nonlinear systems across multiple working areas; further, they do not take the batch forging process into account, let alone its distribution modeling. b) All previous dynamic analysis studies simplify the forging system to having a single-frequency pressure fluctuation and neglect the influences of non-linear load force. Further, they fail to take the flow equation in both valves and cylinders into account. c) Conventional control approaches only consider the linear deformation force and pay no attention to sudden changes and the motion synchronization for the multi-cylinder system, making them less effective for complex, nonlinear time-varying forging processes subject to sudden changes.

Download or read book Identification Adaptation Learning written by Sergio Bittanti and published by Springer Science & Business Media. This book was released on 1996-07-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the lectures given at the NATO Advanced Study Institute From Identijication to Learning held in Villa Olmo, Como, Italy, from August 22 to September 2, 1994. The school was devoted to the themes of Identijication, Adaptation and Learning, as they are currently understood in the Information and Contral engineering community, their development in the last few decades, their inter connections and their applications. These titles describe challenging, exciting and rapidly growing research areas which are of interest both to contral and communication engineers and to statisticians and computer scientists. In accordance with the general goals of the Institute, and notwithstanding the rat her advanced level of the topics discussed, the presentations have been generally kept at a fairly tutorial level. For this reason this book should be valuable to a variety of rearchers and to graduate students interested in the general area of Control, Signals and Information Pracessing. As the goal of the school was to explore a common methodologicalline of reading the issues, the flavor is quite interdisciplinary. We regard this as an original and valuable feature of this book.

Download or read book Adaptive Mobile Robotics written by Abul K. M. Azad and published by World Scientific. This book was released on 2012 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2012 conference. Robots are no longer confined to industrial and manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.

Download or read book Autonomous Control Systems and Vehicles written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2013-05-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Intelligent Unmanned Systems 2011 was organized by the International Society of Intelligent Unmanned Systems and locally by the Center for Bio-Micro Robotics Research at Chiba University, Japan. The event was the 7th conference continuing from previous conferences held in Seoul, Korea (2005, 2006), Bali, Indonesia (2007), Nanjing, China (2008), Jeju, Korea (2009), and Bali, Indonesia (2010). ICIUS 2011 focused on both theory and application, primarily covering the topics of robotics, autonomous vehicles, intelligent unmanned technologies, and biomimetics. We invited seven keynote speakers who dealt with related state-of-the-art technologies including unmanned aerial vehicles (UAVs) and micro air vehicles (MAVs), flapping wings (FWs), unmanned ground vehicles (UGVs), underwater vehicles (UVs), bio-inspired robotics, advanced control, and intelligent systems, among others. This book is a collection of excellent papers that were updated after presentation at ICIUS2011. All papers that form the chapters of this book were reviewed and revised from the perspective of advanced relevant technologies in the field. The aim of this book is to stimulate interactions among researchers active in the areas pertinent to intelligent unmanned systems.

Download or read book Fusion of Hard and Soft Control Strategies for the Robotic Hand written by Cheng-Hung Chen and published by John Wiley & Sons. This book was released on 2017-09-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth review of hybrid control techniques for smart prosthetic hand technology by two of the world’s pioneering experts in the field Long considered the stuff of science fiction, a prosthetic hand capable of fully replicating all of that appendage’s various functions is closer to becoming reality than ever before. This book provides a comprehensive report on exciting recent developments in hybrid control techniques—one of the most crucial hurdles to be overcome in creating smart prosthetic hands. Coauthored by two of the world’s foremost pioneering experts in the field, Fusion of Hard and Soft Control Strategies for Robotic Hand treats robotic hands for multiple applications. Itbegins withan overview of advances in main control techniques that have been made over the past decade before addressing the military context for affordable robotic hand technology with tactile and/or proprioceptive feedback for hand amputees. Kinematics, homogeneous transformations, inverse and differential kinematics, trajectory planning, and dynamic models of two-link thumb and three-link index finger are discussed in detail. The remainder of the book is devoted to the most promising soft computing techniques, particle swarm optimization techniques, and strategies combining hard and soft controls. In addition, the book: Includes a report on exciting new developments in prosthetic/robotic hand technology, with an emphasis on the fusion of hard and soft control strategies Covers both prosthetic and non-prosthetic hand designs for everything from routine human operations, robotic surgery, and repair and maintenance, to hazardous materials handling, space applications, explosives disposal, and more Provides a comprehensive overview of five-fingered robotic hand technology kinematics, dynamics, and control Features detailed coverage of important recent developments in neuroprosthetics Fusion of Hard and Soft Control Strategies for Robotic Hand is a must-read for researchers in control engineering, robotic engineering, biomedical sciences and engineering, and rehabilitation engineering.

Download or read book Visual Servoing in Robotics written by Jorge Pomares and published by MDPI. This book was released on 2021-08-31 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visual servoing is a well-known approach to guide robots using visual information. Image processing, robotics, and control theory are combined in order to control the motion of a robot depending on the visual information extracted from the images captured by one or several cameras. With respect to vision issues, a number of issues are currently being addressed by ongoing research, such as the use of different types of image features (or different types of cameras such as RGBD cameras), image processing at high velocity, and convergence properties. As shown in this book, the use of new control schemes allows the system to behave more robustly, efficiently, or compliantly, with fewer delays. Related issues such as optimal and robust approaches, direct control, path tracking, or sensor fusion are also addressed. Additionally, we can currently find visual servoing systems being applied in a number of different domains. This book considers various aspects of visual servoing systems, such as the design of new strategies for their application to parallel robots, mobile manipulators, teleoperation, and the application of this type of control system in new areas.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume V written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Advances in Computational Intelligence written by Obdulia Pichardo Lagunas and published by Springer Nature. This book was released on 2022-10-22 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNAI 13612 and 13613 constitutes the proceedings of the 21st Mexican International Conference on Artificial Intelligence, MICAI 2022, held in Monterrey, Mexico, in October 2022. The total of 63 papers presented in these two volumes was carefully reviewed and selected from 137 submissions. The first volume, Advances in Computational Intelligence, contains 34 papers structured into three sections: Machine and Deep Learning Image Processing and Pattern Recognition Evolutionary and Metaheuristic Algorithms The second volume contains 29 papers structured into two sections: Natural Language Processing Intelligent Applications and Robotics

Download or read book RAAD 2012 written by and published by E.S.A.. This book was released on 2012 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: