Download or read book Electro Hydraulic Actuation Systems written by J. Jaidev Vyas and published by Springer. This book was released on 2018-09-01 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a unique integrated platform, which not only describes the design methodology of electro-hydraulic actuation systems but also provides insights into the design of the servo valve, which is the most important component in the system. It presents a step-by-step design process, comparative tables, illustrative figures, and detailed explanations. The book focuses on the design and testing of electro-hydraulic actuation systems, which are increasingly being used in motion control applications, particularly in those where precision actuation at high operational rates is of prime importance. It describes in detail the design philosophy of such high-performance systems, presenting a system used as a physical test setup together with experimental results to corroborate the calculations. Of particular interest are the electro-hydraulic servo valves that form the heart of these actuations. These valves are complex and not much data is available in open literature due to OEM propriety issues. In this context, the book discusses the elaborate mathematical models that have been derived and an approach to validate the mathematical models with test results. Presenting the complex methodology in simple language, it will prove to be a valuable resource for students, researchers, and professional engineers alike.
Download or read book Nonlinear Control Techniques for Electro Hydraulic Actuators in Robotics Engineering written by Qing Guo and published by CRC Press. This book was released on 2017-08-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering meets the needs of those working in advanced electro-hydraulic controls for modern mechatronic and robotic systems. The non-linear EHS control methods covered are proving to be more effective than traditional controllers, such as PIDs. The control strategies given address parametric uncertainty, unknown external load disturbance, single-rod actuator characteristics, and control saturation. Theoretical and experimental validations are explained, and examples provided. Based on the authors' cutting-edge research, this work is an important resource for engineers, researchers, and students working in EHS.
Download or read book Electro Hydraulic Control Theory and Its Applications Under Extreme Environment written by Yaobao Yin and published by Butterworth-Heinemann. This book was released on 2019-02-16 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro hydraulic Control Theory and Its Applications under Extreme Environment not only presents an overview on the topic, but also delves into the fundamental mathematic models of electro hydraulic control and the application of key hydraulic components under extreme environments. The book contains chapters on hydraulic system design, including thermal analysis on hydraulic power systems in aircraft, power matching designs of hydraulic rudder, and flow matching control of asymmetric valves and cylinders. With additional coverage on new devices, experiments and application technologies, this book is an ideal reference on the research and development of significant equipment. - Addresses valves' application in aircrafts, including servo valves, relief valves and pressure reducing valves - Presents a qualitative and quantitative forecast of future electro-hydraulic servo systems, service performance, and mechanization in harsh environments - Provides analysis methods, mathematical models and optimization design methods of electro-hydraulic servo valves under extreme environments
Download or read book Hydraulic and Electric Hydraulic Control Systems written by R.B. Walters and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power range, specifically at fractional horsepower level. A further, and frequently overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
Download or read book Commercial Aircraft Hydraulic Systems written by Shaoping Wang and published by Academic Press. This book was released on 2015-10-09 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial Aircraft Hydraulic Systems: Shanghai Jiao Tong University Press Aerospace Series focuses on the operational principles and design technology of aircraft hydraulic systems, including the hydraulic power supply and actuation system and describing new types of structures and components such as the 2H/2E structure design method and the use of electro hydrostatic actuators (EHAs). Based on the commercial aircraft hydraulic system, this is the first textbook that describes the whole lifecycle of integrated design, analysis, and assessment methods and technologies, enabling readers to tackle challenging high-pressure and high-power hydraulic system problems in university research and industrial contexts. Commercial Aircraft Hydraulic Systems is the latest in a series published by the Shanghai Jiao Tong University Press Aerospace Series that covers the latest advances in research and development in aerospace. Its scope includes theoretical studies, design methods, and real-world implementations and applications. The readership for the series is broad, reflecting the wide range of aerospace interest and application. Titles within the series include Reliability Analysis of Dynamic Systems, Wake Vortex Control, Aeroacoustics: Fundamentals and Applications in Aeropropulsion Systems, Computational Intelligence in Aerospace Engineering, and Unsteady Flow and Aeroelasticity in Turbomachinery. - Presents the first book to describe the interface between the hydraulic system and the flight control system in commercial aircraft - Focuses on the operational principles and design technology of aircraft hydraulic systems, including the hydraulic power supply and actuation system - Includes the most advanced methods and technologies of hydraulic systems - Describes the interaction between hydraulic systems and other disciplines
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1965 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Practice for Design of Control Systems for Drilling Well Control Equipment written by American Petroleum Institute. Production Department and published by . This book was released on 1990 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Hydraulic Control Systems written by Noah D. Manring and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides key updates to a must-have text on hydraulic control systems This fully updated, second edition offers students and professionals a reliable and comprehensive guide to the hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. The book also offers all new information on: advanced control topics; auxiliary components (reservoirs, accumulators, coolers, filters); hybrid transmissions; multi-circuit systems; and digital hydraulics. Chapters in Hydraulic Control Systems, 2nd Edition cover; fluid properties; fluid mechanics; dynamic systems and control; hydraulic valves, pumps, and actuators; auxiliary components; and both valve and pump controlled hydraulic systems. The book presents illustrative case studies throughout that highlight important topics and demonstrate how equations can be implemented and used in the real world. It also features end-of-chapter exercises to help facilitate learning. It is a powerful tool for developing a solid understanding of hydraulic control systems that will serve all practicing engineers in the field. Provides a useful review of fluid mechanics and system dynamics Offers thorough analysis of transient fluid flow forces within valves Adds all new information on: advanced control topics; auxiliary components; hybrid transmissions; multi-circuit systems; and digital hydraulics Discusses flow ripple for both gear pumps and axial piston pumps Presents updated analysis of the pump control problems associated with swash plate type machines Showcases a successful methodology for hydraulic system design Features reduced-order models and PID controllers showing control objectives of position, velocity, and effort Hydraulic Control Systems, 2nd Edition is an important book for undergraduate and first-year graduate students taking courses in fluid power. It is also an excellent resource for practicing engineers in the field of fluid power.
Download or read book The Hydraulic Handbook written by Trevor M. Hunt and published by Elsevier. This book was released on 1996 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The first point of reference for design engineers, hydraulic technicians, chief engineers, plant engineers, and anyone concerned with the selection, installation, operation or maintenance of hydraulics equipment. The hydraulic industry has seen many changes over recent years and numerous new techniques, components and methods have been introduced. The ninth edition of the Hydraulic Handbook incorporates all these developments to provide a crucial reference manual for practical and technical guidance.
Download or read book Light and Heavy Vehicle Technology written by M J Nunney and published by Routledge. This book was released on 2007-01-18 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light and Heavy Vehicle Technology, Fourth Edition, provides a complete text and reference to the design, construction and operation of the many and varied components of modern motor vehicles, including the knowledge needed to service and repair them. This book provides incomparable coverage of both cars and heavier vehicles, featuring over 1000 illustrations. This new edition has been brought fully up to date with modern practices and designs, whilst maintaining the information needed to deal with older vehicles. Two entirely new sections of the book provide a topical introduction to alternative power sources and fuels, and battery-electric, hybrid and fuel-cell vehicles. More information on the latest developments in fuel injection, diesel engines and transmissions has also been added. An expanded list of technical abbreviations now contains over 200 entries – a useful resource for professional technicians in their day-to-day work. This book is an essential textbook for all students of automotive engineering, particularly on IMI / C&G 4000 series and BTEC courses and provides all the underpinning knowledge required for NVQs to level 3. By bridging the gap between basic and more advanced treatments of the subject, it also acts as a useful source of information for experienced technicians and technically minded motorists, and will help them to improve their knowledge and skills.
Download or read book Official Gazette of the United States Patent Office written by United States. Patent Office and published by . This book was released on 1974 with total page 2418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Oil Hydraulics written by Chatti Srinivasa Rao and published by BlueRose Publishers. This book was released on 2020-05-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IOT with Smart Systems written by Tomonobu Senjyu and published by Springer Nature. This book was released on 2022-01-05 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers addressing state-of-the-art research in all areas of information and communication technologies and their applications in intelligent computing, cloud storage, data mining and software analysis. It presents the outcomes of the Fifth International Conference on Information and Communication Technology for Intelligent Systems (ICTIS 2021), held in Ahmedabad, India. The book is divided into two volumes. It discusses the fundamentals of various data analysis techniques and algorithms, making it a valuable resource for researchers and practitioners alike.
Download or read book API Recommended Practice written by American Petroleum Institute. Production Dept and published by . This book was released on 1990 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
