Download or read book Sun Tracker Automatic Solar Tracking Sun Tracking Systems Solar Trackers and Automatic Sun Tracker Systems written by Gerro Prinsloo and published by Gerro Prinsloo. This book was released on 2014-10-12 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details Solar-Tracking, Automatic Sun-Tracking-Systems and Solar-Trackers. Book and literature review is ideal for sun and moon tracking in solar applications for sun-rich countries such as the USA, Spain, Portugal, Mediterranean, Italy, Greece, Mexico, Portugal, China, India, Brazil, Chili, Argentina, South America, UAE, Saudi Arabia, Middle East, Iran, Iraq, etc. A solar tracker is a device that orients a payload toward the sun. Like a satellite tracker or moon tracker, it tracks the celestial object in the sky on its orbital path of apparent movement. A programmable computer based solar tracking device includes principles of solar tracking, solar tracking systems, as well as microcontroller, microprocessor and/or PC based solar tracking control to orientate solar reflectors, solar lenses, photovoltaic panels or other optical configurations towards the sun. Motorized space frames and kinematic systems ensure motion dynamics and employ drive technology and gearing principles to steer optical configurations such as mangin, parabolic, conic, or cassegrain solar energy collectors to face the sun and follow the sun movement contour continuously. In harnessing power from the sun through a solar tracker or practical solar tracking system, renewable energy control automation systems require automatic solar tracking software and solar position algorithms to accomplish dynamic motion control with control automation architecture, circuit boards and hardware. On-axis sun tracking system such as the altitude-azimuth dual axis or multi-axis solar tracker systems use a sun tracking algorithm or ray tracing sensors or software to ensure the sun's passage through the sky is traced with high precision in automated solar tracker applications, right through summer solstice, solar equinox and winter solstice. From sun tracing software perspective, the sonnet Tracing The Sun has a literal meaning. Within the context of sun track and trace, this book explains that the sun's daily path across the sky is directed by relatively simple principles, and if grasped/understood, then it is relatively easy to trace the sun with sun following software. Sun position computer software for tracing the sun are available as open source code, sources that is listed in this book. Ironically there was even a system called sun chaser, said to have been a solar positioner system known for chasing the sun throughout the day. Using solar equations in an electronic circuit for solar tracking is quite simple, even if you are a novice, but mathematical solar equations are over complicated by academic experts and professors in text-books, journal articles and internet websites. In terms of solar hobbies, scholars, students and Hobbyist's looking at solar tracking electronics or PC programs for solar tracking are usually overcome by the sheer volume of scientific material and internet resources, which leaves many developers in frustration when search for simple experimental solar tracking source-code for their on-axis sun-tracking systems. This booklet will simplify the search for the mystical sun tracking formulas for your sun tracker innovation and help you develop your own autonomous solar tracking controller. By directing the solar collector directly into the sun, a solar harvesting means or device can harness sunlight or thermal heat. This is achieved with the help of sun angle formulas, solar angle formulas or solar tracking procedures for the calculation of sun's position in the sky. Automatic sun tracking system software includes algorithms for solar altitude azimuth angle calculations required in following the sun across the sky. In using the longitude, latitude GPS coordinates of the solar tracker location, these sun tracking software tools supports precision solar tracking by determining the solar altitude-azimuth coordinates for the sun trajectory in altitude-azimuth tracking at the tracker location, using certain sun angle formulas in sun vector calculations. Instead of follow the sun software, a sun tracking sensor such as a sun sensor or webcam or video camera with vision based sun following image processing software can also be used to determine the position of the sun optically. Such optical feedback devices are often used in solar panel tracking systems and dish tracking systems. Dynamic sun tracing is also used in solar surveying, DNI analyser and sun surveying systems that build solar infographics maps with solar radiance, irradiance and DNI models for GIS (geographical information system). In this way geospatial methods on solar/environment interaction makes use use of geospatial technologies (GIS, Remote Sensing, and Cartography).Climatic data and weather station or weather center data, as well as queries from sky servers and solar resource database systems (i.e. on DB2, Sybase, Oracle, SQL, MySQL) may also be associated with solar GIS maps. In such solar resource modelling systems, a pyranometer or solarimeter is normally used in addition to measure direct and indirect, scattered, dispersed, reflective radiation for a particular geographical location. Sunlight analysis is important in flash photography where photographic lighting are important for photographers. GIS systems are used by architects who add sun shadow applets to study architectural shading or sun shadow analysis, solar flux calculations, optical modelling or to perform weather modelling. Such systems often employ a computer operated telescope type mechanism with ray tracing program software as a solar navigator or sun tracer that determines the solar position and intensity. The purpose of this booklet is to assist developers to track and trace suitable source-code and solar tracking algorithms for their application, whether a hobbyist, scientist, technician or engineer. Many open-source sun following and tracking algorithms and source-code for solar tracking programs and modules are freely available to download on the internet today. Certain proprietary solar tracker kits and solar tracking controllers include a software development kit SDK for its application programming interface API attributes (Pebble). Widget libraries, widget toolkits, GUI toolkit and UX libraries with graphical control elements are also available to construct the graphical user interface (GUI) for your solar tracking or solar power monitoring program. The solar library used by solar position calculators, solar simulation software and solar contour calculators include machine program code for the solar hardware controller which are software programmed into Micro-controllers, Programmable Logic Controllers PLC, programmable gate arrays, Arduino processor or PIC processor. PC based solar tracking is also high in demand using C++, Visual Basic VB, as well as MS Windows, Linux and Apple Mac based operating systems for sun path tables on Matlab, Excel. Some books and internet webpages use other terms, such as: sun angle calculator, sun position calculator or solar angle calculator. As said, such software code calculate the solar azimuth angle, solar altitude angle, solar elevation angle or the solar Zenith angle (Zenith solar angle is simply referenced from vertical plane, the mirror of the elevation angle measured from the horizontal or ground plane level). Similar software code is also used in solar calculator apps or the solar power calculator apps for IOS and Android smartphone devices. Most of these smartphone solar mobile apps show the sun path and sun-angles for any location and date over a 24 hour period. Some smartphones include augmented reality features in which you can physically see and look at the solar path through your cell phone camera or mobile phone camera at your phone's specific GPS location. In the computer programming and digital signal processing (DSP) environment, (free/open source) program code are available for VB, .Net, Delphi, Python, C, C+, C++, Swift, ADM, F, Flash, Basic, QBasic, GBasic, KBasic, SIMPL language, Squirrel, Solaris, Assembly language on operating systems such as MS Windows, Apple Mac, DOS or Linux OS. Software algorithms predicting position of the sun in the sky are commonly available as graphical programming platforms such as Matlab (Mathworks), Simulink models, Java applets, TRNSYS simulations, Scada system apps, Labview module, Beckhoff TwinCAT (Visual Studio), Siemens SPA, mobile and iphone apps, Android or iOS tablet apps, and so forth. At the same time, PLC software code for a range of sun tracking automation technology can follow the profile of sun in sky for Siemens, HP, Panasonic, ABB, Allan Bradley, OMRON, SEW, Festo, Beckhoff, Rockwell, Schneider, Endress Hauser, Fudji electric. Honeywell, Fuchs, Yokonawa, or Muthibishi platforms. Sun path projection software are also available for a range of modular IPC embedded PC motherboards, Industrial PC, PLC (Programmable Logic Controller) and PAC (Programmable Automation Controller) such as the Siemens S7-1200 or Siemens Logo, Beckhoff IPC or CX series, OMRON PLC, Ercam PLC, AC500plc ABB, National Instruments NI PXI or NI cRIO, PIC processor, Intel 8051/8085, IBM (Cell, Power, Brain or Truenorth series), FPGA (Xilinx Altera Nios), Xeon, Atmel megaAVR, or Arduino AtMega microcontroller, with servo motor, stepper motor, direct current DC pulse width modulation PWM (current driver) or alternating current AC SPS or IPC variable frequency drives VFD motor drives (also termed adjustable-frequency drive, variable-speed drive, AC drive, micro drive or inverter drive) for electrical, mechatronic, pneumatic, or hydraulic solar tracking actuators. The above motion control and robot control systems include analogue or digital interfacing ports on the processors to allow for tracker angle orientation feedback control through one or a combination of angle sensor or angle encoder, shaft encoder, precision encoder, optical encoder, magnetic encoder, direction encoder, rotational encoder, chip encoder, tilt sensor, inclination sensor, or pitch sensor. Note that the tracker's elevation or zenith axis angle may measured using an altitude angle-, declination angle-, inclination angle-, pitch angle-, or vertical angle-, zenith angle- sensor or inclinometer. Similarly the tracker's azimuth axis angle be measured with a azimuth angle-, horizontal angle-, or roll angle- sensor. Chip integrated accelerometer magnetometer gyroscope type angle sensors can also be used to calculate displacement. Other options include the use of thermal imaging systems such as a Fluke thermal imager, or robotic or vision based solar tracker systems that employ face tracking, head tracking, hand tracking, eye tracking and car tracking principles in solar tracking. With unattended decentralised rural, island, isolated, or autonomous off-grid power installations, remote control, monitoring, data acquisition, digital datalogging and online measurement and verification equipment becomes crucial. It assists the operator with supervisory control to monitor the efficiency of remote renewable energy resources and systems and provide valuable web-based feedback in terms of CO2 and clean development mechanism (CDM) reporting. A power quality analyser for diagnostics through internet, WiFi and cellular mobile links is most valuable in frontline troubleshooting and predictive maintenance, where quick diagnostic analysis is required to detect and prevent power quality issues. Solar tracker applications cover a wide spectrum of solar energy and concentrated solar devices, including solar power generation, solar desalination, solar water purification, solar steam generation, solar electricity generation, solar industrial process heat, solar thermal heat storage, solar food dryers, solar water pumping, hydrogen production from methane or producing hydrogen and oxygen from water (HHO) through electrolysis. Many patented or non-patented solar apparatus include tracking in solar apparatus for solar electric generator, solar desalinator, solar steam engine, solar ice maker, solar water purifier, solar cooling, solar refrigeration, USB solar charger, solar phone charging, portable solar charging tracker, solar coffee brewing, solar cooking or solar dying means. Your project may be the next breakthrough or patent, but your invention is held back by frustration in search for the sun tracker you require for your solar powered appliance, solar generator, solar tracker robot, solar freezer, solar cooker, solar drier, solar pump, solar freezer, or solar dryer project. Whether your solar electronic circuit diagram include a simplified solar controller design in a solar electricity project, solar power kit, solar hobby kit, solar steam generator, solar hot water system, solar ice maker, solar desalinator, hobbyist solar panels, hobby robot, or if you are developing professional or hobby electronics for a solar utility or micro scale solar powerplant for your own solar farm or solar farming, this publication may help accelerate the development of your solar tracking innovation. Lately, solar polygeneration, solar trigeneration (solar triple generation), and solar quad generation (adding delivery of steam, liquid/gaseous fuel, or capture food-grade CO$_2$) systems have need for automatic solar tracking. These systems are known for significant efficiency increases in energy yield as a result of the integration and re-use of waste or residual heat and are suitable for compact packaged micro solar powerplants that could be manufactured and transported in kit-form and operate on a plug-and play basis. Typical hybrid solar power systems include compact or packaged solar micro combined heat and power (CHP or mCHP) or solar micro combined, cooling, heating and power (CCHP, CHPC, mCCHP, or mCHPC) systems used in distributed power generation. These systems are often combined in concentrated solar CSP and CPV smart microgrid configurations for off-grid rural, island or isolated microgrid, minigrid and distributed power renewable energy systems. Solar tracking algorithms are also used in modelling of trigeneration systems using Matlab and Simulink platform as well as in automation and control of renewable energy systems through intelligent parsing, multi-objective, adaptive learning control and control optimization strategies. Solar tracking algorithms also find application in developing solar models for country or location specific solar studies, for example in terms of measuring or analysis of the fluctuations of the solar radiation (i.e. direct and diffuse radiation) in a particular area. Solar DNI, solar irradiance and atmospheric information and models can thus be integrated into a solar map, solar atlas or geographical information systems (GIS). Such models allows for defining local parameters for specific regions that may be valuable in terms of the evaluation of different solar in photovoltaic of CSP systems on simulation and synthesis platforms such as Matlab and Simulink or in linear or multi-objective optimization algorithm platforms such as COMPOSE, EnergyPLAN or DER-CAM. A dual-axis solar tracker and single-axis solar tracker may use a sun tracker program or sun tracker algorithm to position a solar dish, solar panel array, heliostat array, PV panel, solar antenna or infrared solar nantenna. A self-tracking solar concentrator performs automatic solar tracking by computing the solar vector. Solar position algorithms (TwinCAT, SPA, or PSA Algorithms) use an astronomical algorithm to calculate the position of the sun. It uses astronomical software algorithms and equations for solar tracking in the calculation of sun's position in the sky for each location on the earth at any time of day. Like an optical solar telescope, the solar position algorithm pin-points the solar reflector at the sun and locks onto the sun's position to track the sun across the sky as the sun progresses throughout the day. Optical sensors such as photodiodes, light-dependant-resistors (LDR) or photoresistors are used as optical accuracy feedback devices. Lately we also included a section in the book (with links to microprocessor code) on how the PixArt Wii infrared camera in the Wii remote or Wiimote may be used in infrared solar tracking applications. In order to harvest free energy from the sun, some automatic solar positioning systems use an optical means to direct the solar tracking device. These solar tracking strategies use optical tracking techniques, such as a sun sensor means, to direct sun rays onto a silicon or CMOS substrate to determine the X and Y coordinates of the sun's position. In a solar mems sun-sensor device, incident sunlight enters the sun sensor through a small pin-hole in a mask plate where light is exposed to a silicon substrate. In a web-camera or camera image processing sun tracking and sun following means, object tracking software performs multi object tracking or moving object tracking methods. In an solar object tracking technique, image processing software performs mathematical processing to box the outline of the apparent solar disc or sun blob within the captured image frame, while sun-localization is performed with an edge detection algorithm to determine the solar vector coordinates. An automated positioning system help maximize the yields of solar power plants through solar tracking control to harness sun's energy. In such renewable energy systems, the solar panel positioning system uses a sun tracking techniques and a solar angle calculator in positioning PV panels in photovoltaic systems and concentrated photovoltaic CPV systems. Automatic on-axis solar tracking in a PV solar tracking system can be dual-axis sun tracking or single-axis sun solar tracking. It is known that a motorized positioning system in a photovoltaic panel tracker increase energy yield and ensures increased power output, even in a single axis solar tracking configuration. Other applications such as robotic solar tracker or robotic solar tracking system uses robotica with artificial intelligence in the control optimization of energy yield in solar harvesting through a robotic tracking system. Automatic positioning systems in solar tracking designs are also used in other free energy generators, such as concentrated solar thermal power CSP and dish Stirling systems. The sun tracking device in a solar collector in a solar concentrator or solar collector Such a performs on-axis solar tracking, a dual axis solar tracker assists to harness energy from the sun through an optical solar collector, which can be a parabolic mirror, parabolic reflector, Fresnel lens or mirror array/matrix. A parabolic dish or reflector is dynamically steered using a transmission system or solar tracking slew drive mean. In steering the dish to face the sun, the power dish actuator and actuation means in a parabolic dish system optically focusses the sun's energy on the focal point of a parabolic dish or solar concentrating means. A Stirling engine, solar heat pipe, thermosyphin, solar phase change material PCM receiver, or a fibre optic sunlight receiver means is located at the focal point of the solar concentrator. The dish Stirling engine configuration is referred to as a dish Stirling system or Stirling power generation system. Hybrid solar power systems (used in combination with biogas, biofuel, petrol, ethanol, diesel, natural gas or PNG) use a combination of power sources to harness and store solar energy in a storage medium. Any multitude of energy sources can be combined through the use of controllers and the energy stored in batteries, phase change material, thermal heat storage, and in cogeneration form converted to the required power using thermodynamic cycles (organic Rankin, Brayton cycle, micro turbine, Stirling) with an inverter and charge controller. 这本书详细介绍了全自动太阳能跟踪，太阳跟踪系统的出现，太阳能跟踪器和太阳跟踪系统。智能全自动太阳能跟踪器是定向向着太阳的有效载荷设备。这种可编程计算机的太阳能跟踪装置，包括太阳跟踪，太阳能跟踪系统，以及微控制器，微处理器和/或基于PC机的太阳跟踪控制，以定向太阳能反射器，太阳透镜，光电板或其他光学配置朝向太阳的原理。机动空间框架和运动系统，确保运动动力学和采用的驱动技术和传动原理引导光学配置，如曼金，抛物线，圆锥曲线，或卡塞格林式太阳能集热器面向太阳，不断跟随太阳运动的轮廓。 从阳光透过太阳能跟踪器或实用的太阳能跟踪系统利用电力，可再生能源控制的自动化系统需要自动太阳跟踪软件和太阳位置算法来实现控制与自动化架构，电路板和硬件的动态运动控制。上轴太阳跟踪系统，如高度，方位角双轴或多轴太阳跟踪系统使用太阳跟踪算法或光线追踪传感器或软件，以确保通过天空中太阳的通道被跟踪的高精度的自动太阳跟踪器的应用，通过正确的夏至，春分太阳和冬至。一种高精度太阳位置计算器或太阳位置算法是这样的自动太阳能跟踪系统的设计和施工中的重要一步。 В этой книге подробно Автоматическая Solar-Tracking, ВС-Tracking-Systems, Solar-трекеры и ВС Tracker Systems. Интеллектуальный автоматический солнечной слежения является устройством, которое ориентирует полезную нагрузку к солнцу. Такое программируемый компьютер на основе солнечной устройство слежения включает принципы солнечной слежения, солнечных систем слежения, а также микроконтроллер, микропроцессор и / или ПК на базе управления солнечной отслеживания ориентироваться солнечных отражателей, солнечные линзы, фотоэлектрические панели или другие оптические конфигурации к ВС Моторизованные космические кадры и кинематические системы обеспечения динамики движения и использовать приводной техники и готовится принципы, чтобы направить оптические конфигурации, такие как Манжен, параболических, конических или Кассегрена солнечных коллекторов энергии, чтобы лицом к солнцу и следовать за солнцем контур движения непрерывно. В обуздывать силу от солнца через солнечный трекер или практической солнечной системы слежения, системы возобновляемых контроля энергии автоматизации требуют автоматического солнечной отслеживания программного обеспечения и алгоритмов солнечные позиции для достижения динамического контроля движения с архитектуры автоматизации управления, печатных плат и аппаратных средств. На оси системы слежения ВС, таких как высота-азимут двойной оси или многоосевые солнечные системы трекер использовать алгоритм отслеживания солнце или трассировки лучей датчиков или программное обеспечение, чтобы обеспечить прохождение солнца по небу прослеживается с высокой точностью в автоматизированных приложений Солнечная Tracker , прямо через летнего солнцестояния, солнечного равноденствия и зимнего солнцестояния.Высокая точность позиции ВС калькулятор или положение солнца алгоритм это важный шаг в проектировании и строительстве автоматической системой солнечной слежения.
Download or read book Human Error Safety and Systems Development written by Philippe Palanque and published by Springer. This book was released on 2006-04-11 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent accidents in a range of industries have increased concern over the design, development, management and control of safety-critical systems. Attention has now focused upon the role of human error both in the development and in the operation of complex processes. Human Error, Safety and Systems Development gathers contributions from practitioners and researchers presenting and discussing leading edge techniques that can be used to mitigate the impact of error (both system and human) on safety-critical systems. Some of these contributions can be easily integrated into existing systems engineering practices while others provide a more theoretical and fundamental perspective on the issues raised by these kinds of interactive systems. More precisely the contributions cover the following themes: –Techniques for incident and accident analysis; –Empirical studies of operator behaviour in safety-critical systems; –Observational studies of safety-critical systems; –Risk assessment techniques for interactive systems; –Safety-related interface design, development and testing; –Formal description techniques for the design and development of safety-critical interactive systems. Many diverse sectors are covered, including but not limited to aviation, maritime and the other transportation industries, the healthcare industry, process and power generation and military applications. This volume contains 20 original and significant contributions addressing these critical questions. The papers were presented at the 7th IFIP Working Group 13.5 Working Conference on Human Error, Safety and Systems Development, which was held in August 2004 in conjunction with the 18th IFIP World Computer Congress in Toulouse, France, and sponsored by the International Federation for Information Processing (IFIP).
Download or read book Management Information Systems written by Kenneth C. Laudon and published by Pearson Educación. This book was released on 2004 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management Information Systems provides comprehensive and integrative coverage of essential new technologies, information system applications, and their impact on business models and managerial decision-making in an exciting and interactive manner. The twelfth edition focuses on the major changes that have been made in information technology over the past two years, and includes new opening, closing, and Interactive Session cases.
Download or read book Research and Practical Issues of Enterprise Information Systems written by A. Min Tjoa and published by Springer. This book was released on 2007-11-14 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this conference came from a meeting of the IFIP (International Federation for Information Processing) Technical Committee for Information Systems (TC8) in Guimares, Portugal in June 2005. Our goal is to build an IFIP forum among the different Information Systems Communities of TC8 dealing with the increasing important area of Enterprise Information Systems. In this particular meeting the committee members intensively discussed the innovative and unique characteristics of Enterprise Information Systems as scientific sub-discipline. Hence, in this meeting it was decided by the TC8 members that the IFIP TC8 First International Conference on Research and Practical Issues of Enterprise Information Systems (CONFENIS 2006) would be held in April 2006 in Vienna, Austria. Dr. Li Xu (USA) and Dr. A Min Tjoa (IFIP TC8) were assigned to propose a concept for this conference in order to establish an IFIP platform for EIS researchers and practitioners in the field to share experience, and discussing opportunities and challenges. We are very pleased therefore to have this conference organised by the help of the Austrian Computer Society (OCG). OCG supports the idea of this conference due to the urgent need of research and dissemination of new techniques in this key area. We received 180 papers from more than 30 countries for CONFENIS and the Program Committee eventually selected xx papers or extended abstracts, making an acceptance rate of xx% of submitted papers. Each paper was thoroughly reviewed by at least two qualified reviewers.
Download or read book Management Information Systems written by Raymond McLeod and published by Pearson Educación. This book was released on 1998 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text enjoys a strong loyalty among instructors who adopt it. Focusing on the role of managers within an organization, the text emphasizes the development of computer-based information systems to support an organization's objectives and strategic plans. The General Systems Model is, introduced in Chapter 6, and implemented throughout the rest of the text.
Download or read book Clinical Supervision written by Elizabeth L. Holloway and published by SAGE Publications. This book was released on 1995-06-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: In her systems approach to supervision, the author presents a unique system of clinical supervision developed with her colleagues over years of experience as supervisors of psychologists in training. . . . The book is written in a ′reader-friendly′ manner and is both theoretical and practical. The prose is clear; the charts are easily decipherable. Research findings are separated onto single pages interspersed throughout pertinent sections and printed in darker shades to draw the eye. The various levels of the supervisory session (transcript, recall, interview, analysis) are placed in columns side by side for easy comparison. The author has succeeded in dissecting the complex instructional strategy of modeling counseling task, function, and skill within the supervisory relationship. Her work is a valuable complement to the existing body of literature. --Susan B. DeVaney in Counseling Today "The book uses a range of interesting transcipts to illustrate points together with providing up-to-date research information on subjects such as trainee learning needs, supervisor and trainee gender, institutional factors and supervisor experience, to mention but a few. A thought-provoking book and one which I would recommend as profitable reading for those engaged in or considering becoming engaged in the field of supervision." --Gladeana McMahon in BPS Counselling
Download or read book Industrial Communication Systems written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition, Industrial Communications Systems combines traditional and newer, more specialized knowledge that helps industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Modern communication systems in factories use many different—and increasingly sophisticated—systems to send and receive information. Industrial Communication Systems spans the full gamut of concepts that engineers require to maintain a well-designed, reliable communications system that can ensure successful operation of any production process. Delving into the subject, this volume covers: Technical principles Application-specific areas Technologies Internet programming Outlook, including trends and expected challenges Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Control and Mechatronics Intelligent Systems
Download or read book Communications Standard Dictionary written by Martin Weik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, the Communications Standard Dictionary maintains its position as the most comprehensive dictionary covering communications technologies available. A one-of-a-kind reference, this dictionary remains unmatched in the breadth and scope of its coverage nd its pprimary reference for communications, computer, data processing, and control systems professionals.
Download or read book Distributed Computer Control System written by T. J. Harrison and published by Elsevier. This book was released on 2014-05-19 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Computer Control Systems: Proceedings of the IFAC Workshop, Tampa, Florida, U.S.A., 2-4 October 1979 focuses on the design, processes, methodologies, and applications of distributed computing systems. The selection first discusses the use of distributed control systems for facility energy management, including space conditioning control, plant design, central plant control, and system design. The book then takes a look at programming distributed computer systems with higher level languages. Topics include design of an application programming language for distributed computing systems; realization of a suitable programming language for distributed computing systems; and optimal structure and capabilities of an automatic control system. The text focuses on the similarities and differences of distributed computer control systems; transaction processing as an efficient conceptual framework for comparing and understanding distributed systems; and multi-processor approach for the automation of quality control in an overall production control system. The selection also deals with transaction processing in distributed control systems; parallel processing for distributed computer control systems; and design and development of distributed control systems. The book is a vital source of data for readers interested in distributed computing.
Download or read book Trends in Industrial Engineering Applications to Manufacturing Process written by Jorge Luis García-Alcaraz and published by Springer Nature. This book was released on 2021-07-02 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers supply chain and logistics, production and manufacturing systems as well as human factors. Topics such as applications to procurements from suppliers, suppliers developments and relationships with suppliers are reported. The techniques and tools applied to production processes, such as, machinery maintenance and quick changeover, are described in detail. The book also presents human factors as the main component in the industrial engineering field, reporting some successful teamwork organizations for improvements and applied ergonomics, among others.
Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Science & Business Media. This book was released on 2009-07-16 with total page 1841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.
Download or read book The Mexican Electoral System written by Instituto Federal Electoral (Mexico) and published by . This book was released on 1994 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The National Agricultural Research Systems in the West Asia and North Africa Region written by and published by ICARDA. This book was released on 1999 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Intelligence Research and Development written by Monique Polit and published by IOS Press. This book was released on 2006 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field covered by Artificial Intelligence (AI) is multiform and gathers subjects as various as the engineering of knowledge, the automatic treatment of the language, the training and the systems multiagents, and more. This book focuses on subjects including Machine Learning, Reasoning, Neural Networks, Computer Vision, and Multiagent Systems.
Download or read book Annual Reports of the Secretary of War written by United States. War Department and published by . This book was released on 1905 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Report of the Secretary of War written by United States. War Department and published by . This book was released on 1905 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
