Download or read book Pyrolysis GC MS Data Book of Synthetic Polymers written by Shin Tsuge and published by Elsevier. This book was released on 2011-08-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this data book, both conventional Py-GC/MS where thermal energy alone is used to cause fragmentation of given polymeric materials and reactive Py-GC/MS in the presence of organic alkaline for condensation polymers are compiled. Before going into detailed presentation of the data, however, acquiring a firm grip on the proper understanding about the situation of Py-GC/MS would promote better utilization of the following pyrolysis data for various polymers samples. This book incorporates recent technological advances in analytical pyrolysis methods especially useful for the characterization of 163 typical synthetic polymers. The book briefly reviews the instrumentation available in advanced analytical pyrolysis, and offers guidance to perform effectually this technique combining with gas chromatography and mass spectrometry. Main contents are comprehensive sample pyrograms, thermograms, identification tables, and representative mass spectra (MS) of pyrolyzates for synthetic polymers. This edition also highlights thermally-assisted hydrolysis and methylation technique effectively applied to 33 basic condensation polymers. - Coverage of Py-GC/MS data of conventional pyrograms and thermograms of basic 163 kinds of synthetic polymers together with MS and retention index data for pyrolyzates, enabling a quick identification - Additional coverage of the pyrograms and their related data for 33 basic condensation polymers obtained by the thermally-assisted hydrolysis and methylation technique - All compiled data measured under the same experimental conditions for pyrolysis, gas chromatography and mass spectrometry to facilitate peak identification - Surveyable instant information on two facing pages dedicated to the whole data of a given polymer sample
Download or read book Introduction to Synthetic Polymers written by Ian McIntyre Campbell and published by Oxford University Press, USA. This book was released on 1994 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear and concise textbook introduces the huge field of polymer science to students taking degree courses in chemistry, materials science and related subjects covering polymers. By focusing on the few major polymers, for example polystyrene and PVC, which are in common use and which thestudents will recognize, the book illustrates simply the basic principles of polymer science. It looks at the factors which give rise to the special properties of polymers, and emphasizes how polymer molecules can be synthesised with different sizes and architectures to tailor the properties of theresulting material. The later chapters then introduce a wide range of polymers, some with special applications now and others with exciting potential for the future. There are exercises at the end of each chapter.
Download or read book Light Associated Reactions of Synthetic Polymers written by A. Ravve and published by Springer Science & Business Media. This book was released on 2007-01-15 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines theoretical explanations of the reactions of light and polymeric materials with development of light responsive polymeric materials for various practical applications. Photo associated reactions and light responsive materials have great potential to improve existing industrial processes, including capturing solar energy. This book presents a range of reactions and materials with some of the most exciting current and future applications.
Download or read book Natural and Synthetic Biomedical Polymers written by Sangamesh G. Kum bar and published by Newnes. This book was released on 2014-01-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are important and attractive biomaterials for researchers and clinical applications due to the ease of tailoring their chemical, physical and biological properties for target devices. Due to this versatility they are rapidly replacing other classes of biomaterials such as ceramics or metals. As a result, the demand for biomedical polymers has grown exponentially and supports a diverse and highly monetized research community. Currently worth $1.2bn in 2009 (up from $650m in 2000), biomedical polymers are expected to achieve a CAGR of 9.8% until 2015, supporting a current research community of approximately 28,000+. Summarizing the main advances in biopolymer development of the last decades, this work systematically covers both the physical science and biomedical engineering of the multidisciplinary field. Coverage extends across synthesis, characterization, design consideration and biomedical applications. The work supports scientists researching the formulation of novel polymers with desirable physical, chemical, biological, biomechanical and degradation properties for specific targeted biomedical applications. - Combines chemistry, biology and engineering for expert and appropriate integration of design and engineering of polymeric biomaterials - Physical, chemical, biological, biomechanical and degradation properties alongside currently deployed clinical applications of specific biomaterials aids use as single source reference on field. - 15+ case studies provides in-depth analysis of currently used polymeric biomaterials, aiding design considerations for the future
Download or read book Synthetic Polymers written by D. Feldman and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Polymers is a comprehensive introduction to the technologies involved in the synthesis of the main classes of engineering high polymers used in such materials as plastics, fibers, rubbers, foams, adhesives and coatings. Besides the basic processes, this volume includes information on physical, chemical and mechanical characteristics - key factors with respect to obtaining the right end products. It also focuses on the main application of synthetic polymers in different engineering areas and gives data on production and consumption. Over 60 technological flowcharts are presented in a clear and concise manner, to provide the reader with essential information on relevant operations.
Download or read book Physical Gels from Biological and Synthetic Polymers written by Madeleine Djabourov and published by Cambridge University Press. This book was released on 2013-05-16 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a unique perspective on state-of-the-art physical gels, this interdisciplinary guide provides a complete, critical analysis of the field and highlights recent developments. It shows the interconnections between the key aspects of gels, from molecules and structure through to rheological and functional properties, with each chapter focusing on a different class of gel. There is also a final chapter covering innovative systems and applications, providing the information needed to understand current and future practical applications of gels in the pharmaceutical, agricultural, cosmetic, chemical and food industries. Many research teams are involved in the field of gels, including theoreticians, experimentalists and chemical engineers, but this interdisciplinary book collates and rationalises the many different points of view to provide a clear understanding of these complex systems for researchers and graduate students.
Download or read book Analytical Pyrolysis of Synthetic Organic Polymers written by Serban C. Moldoveanu and published by Elsevier. This book was released on 2005-01-20 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Pyrolysis of Synthetic Organic Polymers is a follow-up to Analytical Pyrolysis of Natural Organic Polymers, which is volume 20 of the series. The main focus of the book is on practical applications of analytical pyrolysis in synthetic organic polymer identification and characterization. The first part of the book has five chapters including an introduction, a discussion on physico-chemistry of thermal degradation of synthetic polymers and on instrumentation used in analytical pyrolysis, a chapter discussing what type of information can be obtained from analytical pyrolysis, and a chapter dedicated to the analysis and characterization of synthetic polymers.The second part systematically covers the analytical pyrolysis of various classes of synthetic polymers. Some theoretical background for the understanding of polymer structure using analytical pyrolysis is also discussed.* Includes broad coverage of organic synthetic macromolecules* Focuses on physico-chemistry of thermal degradation, and the analytical pyrolysis of various classes of synthetic polymers* Is well written and suitable for both researchers and chemists working in analytical chemistry or in synthetic polymers
Download or read book MALDI TOF Mass Spectrometry of Synthetic Polymers written by Harald Pasch and published by Springer Science & Business Media. This book was released on 2003-02-27 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: MALDI-TOF mass spectrometry is one of the latest and most fascinating new developments in the analysis of organic compounds. Originally developed for the analysis of biomolecules, it has developed into one of the most powerful techniques for the characterization of synthetic polymers. This book describes the fundamentals of the MALDI process and the technical features of MALDI-TOF instrumentation. It reviews the application of MALDI-TOF for identification, chemical and molar mass analysis of synthetic polymers. With many examples, the monograph examines experimental protocols for the determination of endgroups, the analysis of copolymers and additives, and the coupling of liquid chromatography and MALDI-TOF in detail.
Download or read book Synthetic Polymeric Membranes written by K. C. Khulbe and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers in polymeric membranes as well as R&D professionals will find this work an essential addition to the literature. It concentrates on the method recently developed to study the surfaces of synthetic polymeric membranes using an Atomic Force Microscope (AFM), which is fast becoming a very important tool. Each chapter includes information on basic principles, commercial applications, an overview of current research and guidelines for future research.
Download or read book Synthetic Methods in Step Growth Polymers written by Martin E. Rogers and published by John Wiley & Sons. This book was released on 2003-08-08 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alles über die Stufenwachstums-Polymerisation - von Syntheseverfahren und Reinigungsmethoden bis zur Charakterisierung der Produkte - finden Sie in diesem Buch. - bietet einen Ausblick auf zukünftige Trends - mit historischen Informationen - erläutert die Klassifikation von Stufenwachstumspolymeren
Download or read book NMR Methods for Characterization of Synthetic and Natural Polymers written by Rongchun Zhang and published by Royal Society of Chemistry. This book was released on 2019-07-29 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the introduction of FT-NMR spectroscopy around five decades ago, NMR has achieved significant advances in hardware and methodologies, accompanied with the enhancement of spectral resolution and signal sensitivity. Rapid developments in the polymers field mean that accurate and quantitative characterization of polymer structures and dynamics is the keystone for precisely regulating and controlling the physical and chemical properties of the polymer. This book specifically focuses on NMR investigation of complex polymers for the polymer community as well as NMR spectroscopists, and will push the development of both fields. It covers the latest advances, for example high field DNP and ultrafast MAS methodologies, and show how these novel NMR methods characterize various synthetic and natural polymers.
Download or read book Functional Synthetic Polymers written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2019-05-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text focuses on the basic issues and also the literature of the past decade. The book provides a broad overview of functional synthetic polymers. Special issues in the text are: Surface functionalization supramolecular polymers, shape memory polymers, foldable polymers, functionalized biopolymers, supercapacitors, photovoltaic issues, lithography, cleaning methods, such as recovery of gold ions olefin/paraffin, separation by polymeric membranes, ultrafiltration membranes, and other related topics.
Download or read book Advances in Filament Yarn Spinning of Textiles and Polymers written by Dong Zhang and published by Elsevier. This book was released on 2014-02-15 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Filament Yarn Spinning of Textiles and Polymers reviews the different types of spinning techniques for synthetic polymer-based fibers, and issues such as their effect on fiber properties, including melt, dry, wet, and gel spinning. Synthetic polymer-based fibers are used in a great variety of consumer and industrial textile applications ranging from clothing to home furnishings to surgical procedures. This book explores how a wide array of spinning techniques can be applied in the textile industry. Part one considers the fundamental structure and properties of fibers that determine their behavior during spinning. The book then discusses developments in technologies for manufacturing synthetic polymer films to produce different fibers with specialized properties. Part two focuses on spinning techniques, including the benefits and limitations of melt spinning and the use of gel spinning to produce high-strength and high-elastic fibers. These chapters focus specifically on developments in bi-component, bi-constituent, and electro-spinning, in particular the fabrication of nanocomposite fibers. The final chapters review integrated composite spinning of yarns and the principles of wet and dry spinning. This collection is an important reference for a wide range of industrial textile technologists, including spinners, fabric and garment manufacturers, and students of textile technology. It is also of great interest for polymer scientists. - Reviews the different spinning techniques and issues such as their effect on fiber properties, including melt, dry, wet, and gel spinning - Considers the fundamental structure and properties of fibers that determine their behavior during spinning - Reviews integrated composite spinning of yarns and the principles of wet and dry spinning
Download or read book Water soluble Synthetic Polymers written by Philip Molyneux and published by . This book was released on 1983 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Biodegradable Polymers written by Bernhard Rieger and published by Springer. This book was released on 2014-02-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Salen Metal Complexes as Catalysts for the Synthesis of Polycarbonates from Cyclic Ethers and Carbon Dioxide, by Donald J. Darensbourg.- Material Properties of Poly(Propylene Carbonates), by Gerrit. A. Luinstra and Endres Borchardt.- Poly(3-Hydroxybutyrate) from Carbon Monoxide, by Robert Reichardt and Bernhard Rieger. - Ecoflex® and Ecovio®: Biodegradable, Performance-Enabling Plastics, by K. O. Siegenthaler, A. Künkel, G. Skupin and M. Yamamoto.- Biodegradability of Poly(Vinyl Acetate) and Related Polymers, by Manfred Amann and Oliver Minge.- Recent Developments in Ring-Opening Polymerization of Lactones, by P. Lecomte and C. Jérôme.- Recent Developments in Metal-Catalyzed Ring-Opening Polymerization of Lactides and Glycolides: Preparation of Polylactides, Polyglycolide, and Poly(lactide-co-glycolide), by Saikat Dutta, Wen-Chou Hung, Bor-Hunn Huang and Chu-Chieh Lin.- Bionolle (Polybutylenesuccinate), by Yasushi Ichikawa, Tatsuya Mizukoshi.- Polyurethanes from Renewable Resources, by David A. Babb.-
Download or read book Synthetic Methods for Conjugated Polymer and Carbon Materials written by Mario Leclerc and published by John Wiley & Sons. This book was released on 2017-04-10 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and practical overview of the most important modern synthetic aspects of conjugated polymers and carbon materials, including their properties and applications. Well structured, this book summarizes recent achievements, outlines the current state and reviews research trends. As such, a wide variety of polymerization techniques are included on both a strategic as well as a practical level, including Stille, Suzuki , and direct (hetero)arylation polymerizations. Furthermore, it covers various carbon-rich materials, such as graphene and carbon nanotubes, followed by a look at how the different synthetic pathways and strategies influence their final properties, for example, for use in organic electronic devices. The whole is rounded off with a discussion of future technology advances. An essential reference for newcomers as well as experienced researchers in the field.
Download or read book MALDI Mass Spectrometry for Synthetic Polymer Analysis written by Liang Li and published by John Wiley & Sons. This book was released on 2009-10-22 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Practices of Polymer Mass Spectrometry helps readers acquire the skills necessary for selecting the optimal methods, handling samples, analyzing the data, and interpreting the results of the mass spectrometry of polymers. This guide describes the principles of polymer MS and best practices in polymer characterization. It discusses different approaches, including MALDI, ESI, TOF MS, and FT-MS. It provides a guide to developing appropriate sample preparation protocols for different polymers. Complete with examples of applications and experiments, this is an excellent reference for scientists, researchers, graduate students, and others.
