Download or read book Synthesis of Surface Composites Using Friction Stir Processing written by Bharat Gattu and published by . This book was released on 2009 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Composite materials have an edge over monolithic materials due to higher strength/stiffness - to - density ratios, improved fatigue and wear resistance and better high temperature properties. Surface composites provide improved tribological properties such as wear resistance, friction coefficient and corrosion resistance. Friction stir processing (FSP) which originated from friction stir welding (FSW - a method for joining aluminum alloys) is a solid state technique to modify the microstructure of the alloys. During FSP the frictional heat generated at the tool - work piece interface plasticizes the material allowing it to flow around the pin. The combined effect of the plastic deformation and the generated heat leads to grain refinement in the alloys. In the present work, effort has been made to expand the scope of FSP as a novel method for the synthesis of surface composites. Different ways for incorporation of SiC particles into A11100 alloy were explored and compared with each other. The response of the flow of the powder in the substrate during FSP has been studied for different processing features. The effects of various parameters and methodology on the incorporation and distribution of SiC particles in the nugget, the microstructure and mechanical properties of the composite layer were studied"--Abstract, leaf iv.
Download or read book Composite Fabrication on Age Hardened Alloy using Friction Stir Processing written by Namrata Gangil and published by CRC Press. This book was released on 2020-12-13 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date reference text discusses the fabrication technique for strengthening of high specific strength alloys including age-hardened aluminum alloys for several industrial applications. The text presents an exhaustive overview of the materials used in the aircraft construction in general and age-hardened aluminum alloys in particular. The text discusses important concepts including surface composite fabrication using friction stir processing (FSP), FSP tools, effect of reinforcement particles, and conditions that affect strengthening during surface composite fabrication on age-hardened aluminum alloys. The text will facilitate the readers to control parameters and avoid conditions that lead to a net negative impact on the resulting composites and select the one that lead to a net gain. It will enable the readers, researchers, and professionals to plan and practice composite fabrication via FSP with a benefit of net strengthening. The understanding of specific strength of materials used in applications including aerial vehicles and manufacturing is important. The proposed text highlights importance of age-hardened alloy as one of the materials used for diverse applications. It discusses strengthening strategies of existing age-hardened aluminum alloys through composite fabrication via a solid-state FSP route. The text will help students and professionals working in the field of manufacturing, materials science, and aerospace engineering. The text discusses an important aspect of strengthening age-hardened alloy using solid-state friction stir processing for diverse applications in industries including manufacturing and aviation. It will serve as an ideal reference for graduate students, academic researchers, and professionals in the field of mechanical engineering, aerospace engineering, and materials science. It will also be helpful to the professionals working in the aviation and manufacturing industries.
Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. Demonstrates how friction stir processing can be used to make metal matrix composites Includes a review of different approaches of making metal matrix composites by friction stir processing Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites
Download or read book Aluminum Alloy Castings written by John Gilbert Kaufman and published by ASM International. This book was released on 2004-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: J. G. (Gil) Kaufman is currently president of his consulting company, Kaufman Associates.
Download or read book Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing written by Saman Sahraeinejad and published by . This book was released on 2014 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir processing has been employed to produce metal matrix composites by incorporating reinforcement particles in an Al 5059 matrix. Various particles with sizes from 130 nm to 4.3 um, and different process parameters, were examined to obtain a uniform distribution of particles within the processed region. Mechanical properties (i.e. tensile and microhardness) of the Al 5059 matrix metal matrix composites reinforced with Al2O3, SiC, and B4C were tested and compared. Tensile tests demonstrated increases in yield strength by 20, 32, and 38 percent compared to the matrix alloy for composites containing Al2O3, SiC, and B4C, respectively. The average microhardness value within the stir zone increased from 85 HV in the base material to a maximum of 170 HV in the B4C-reinforced composite. Particle refinement during friction stir processing was more pronounced with micron-sized particles, and virtually insignificant for nano-sized particles. Nano-scale particles seem to be more efficient in increasing the hardness when a similar fraction is used compared to micro-sized particles.
Download or read book Composite Fabrication on Age Hardened Alloy using Friction Stir Processing written by Namrata Gangil and published by CRC Press. This book was released on 2020-12-13 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date reference text discusses the fabrication technique for strengthening of high specific strength alloys including age-hardened aluminum alloys for several industrial applications. The text presents an exhaustive overview of the materials used in the aircraft construction in general and age-hardened aluminum alloys in particular. The text discusses important concepts including surface composite fabrication using friction stir processing (FSP), FSP tools, effect of reinforcement particles, and conditions that affect strengthening during surface composite fabrication on age-hardened aluminum alloys. The text will facilitate the readers to control parameters and avoid conditions that lead to a net negative impact on the resulting composites and select the one that lead to a net gain. It will enable the readers, researchers, and professionals to plan and practice composite fabrication via FSP with a benefit of net strengthening. The understanding of specific strength of materials used in applications including aerial vehicles and manufacturing is important. The proposed text highlights importance of age-hardened alloy as one of the materials used for diverse applications. It discusses strengthening strategies of existing age-hardened aluminum alloys through composite fabrication via a solid-state FSP route. The text will help students and professionals working in the field of manufacturing, materials science, and aerospace engineering. The text discusses an important aspect of strengthening age-hardened alloy using solid-state friction stir processing for diverse applications in industries including manufacturing and aviation. It will serve as an ideal reference for graduate students, academic researchers, and professionals in the field of mechanical engineering, aerospace engineering, and materials science. It will also be helpful to the professionals working in the aviation and manufacturing industries.
Download or read book Recent Trends in Industrial and Production Engineering written by Akshay Dvivedi and published by Springer Nature. This book was released on 2021-08-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of the 3rd International Conference on Computational and Experimental Methods (ICCEMME 2021). It covers the broad topic of industrial and production engineering such as sustainable manufacturing systems, rapid prototyping, manufacturing process optimization, machining, and machine tools, casting, welding, forming, machining, machine tools, computer-aided engineering, manufacturing management, automation and metrology. This book will be useful for the researchers and professionals working in the in the field of industrial and production engineering.
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Advanced Joining Processes written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2020-03-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.
Download or read book Friction Stir Welding and Processing written by Rajiv S. Mishra and published by ASM International. This book was released on 2007-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.
Download or read book Surface Engineering by Friction Assisted Processes written by B. Ratna Sunil and published by CRC Press. This book was released on 2019-10-08 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive resource that compiles extensive descriptions of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing into one volume. The book is separated into four sections, beginning with a discussion of surface tailoring of metals by friction stir processing. This first section delves into the basics of friction stir processing (FSP), incorporating illustrations to explain the supporting mechanisms of this process. This section culminates with the introduction of potential applications of FSP in the manufacturing industry and obstacles that may arise when implemented. The following two sections explore and discuss surface metal matrix composites by friction stir processing and surface engineering by friction surfacing. They provide a thorough explanation of the material systems involved in the respective processes and discuss in detail the mechanisms behind each. The book, which closes with a comprehensive discussion of recent developments in friction-assisted processes and their functionality, offers a unique compilation of information on these increasingly prominent developments in the field of surface engineering. This volume organizes the information in a manner that is both easily accessible and comprehensible, utilizing visuals such as figures, tables, and photographs to enhance readers’ understanding. Key features: • Explores a multitude of topics within the field of surface engineering at length • Summarizes and explores the mechanical foundation of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing • Incorporates figures and tables to aid in illustrating the concepts discussed • Offers potential applications and discusses future benefits of specific elements pertaining to surface engineering
Download or read book Utilizing Friction Stir Techniques for Composite Hybridization written by Sagar, Prem and published by IGI Global. This book was released on 2024-07-24 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the captivating landscape of advanced manufacturing, the utilization of friction stir techniques for composite hybridization has ignited a paradigm shift, opening up a plethora of possibilities at the intersection of innovation and application. This transformative approach not only enhances the structural integrity and performance of materials but also paves the way for more sustainable and efficient production processes. As researchers continue to refine these methods, the potential for groundbreaking advancements in material science and engineering remains boundless. Utilizing Friction Stir Techniques for Composite Hybridization explores the realm of advanced materials science and manufacturing. It provides a detailed examination of how friction stir processes can be strategically applied to composite materials for achieving unparalleled advancements in performance, durability, and functionality. Covering topics such as corrosion, fatigue behavior, and sustainability, this book is a vital resource for professionals, researchers, educators, academicians, and postgraduate students.
Download or read book Advances in Manufacturing and Industrial Engineering written by Ranganath M. Singari and published by Springer Nature. This book was released on 2021-01-13 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.
Download or read book Advances in Materials and Metallurgy written by A. K. Lakshminarayanan and published by Springer. This book was released on 2018-09-01 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018), and covers topics regarding both the characterization of materials and their applications across engineering domains. It addresses standard materials such as metals, polymers and composites, as well as nano-, bio- and smart materials. In closing, the book explores energy, the environment and green processes as related to materials engineering. Given its content, it will prove valuable to a broad readership of students, researchers, and professionals alike.
Download or read book Intermetallic Matrix Composites written by Rahul Mitra and published by Elsevier. This book was released on 2017-05-25 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic Matrix Composites: Properties and Applications is a comprehensive guide that studies the types and properties of intermetallic matrix composites, including their processing techniques, characterization and the various testing methods associated with these composites. In addition, it presents modeling techniques, their strengthening mechanisms and the important area of failure and repair. Advanced /complex IMCs are then explained, such as Self-healing IMCs and laminated intermetallic composites. The book concludes by delving into the industries that use these materials, including the automotive industry. Reviews the latest research in intermetallic matrix composites Contains a focus on properties and applications Includes contributions from leading experts in the field
Download or read book Friction Stir Welding and Processing VII written by Rajiv Mishra and published by Springer. This book was released on 2016-12-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on all aspects of science and technology related to friction stir welding and processing.
Download or read book Friction Stir Welding and Processing X written by Yuri Hovanski and published by Springer. This book was released on 2019-02-11 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of the recent progress on friction stir technologies including high-temperature applications, industrial applications, dissimilar alloy/materials, lightweight alloys, simulation, control, characterization, and derivative technologies. The volume offers a current look at friction stir welding technology from application to characterization and from modeling to R&D. Contributions document advances in application, controls, and simulation of the friction stir process to aid researchers in seeing the current state-of-the-art.