Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Faculties Publications and Doctoral Theses in Chemistry and Chemical Engineering at United States Universities written by American Chemical Society. Committee on Professional Training and published by . This book was released on 1991 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synthesis and Properties of Silicones and Silicone Modified Materials written by Stephen J. Clarson and published by American Chemical Society. This book was released on 2003 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis and Properties of Silicones and Silicone-Modified Materials includes sections on synthesis, characterization, elastomers and reinforcement, surfaces and interfaces, copolymers, and reinforcing fillers. Synthesis and Properties of Silicones and Silicone-Modified Materials reviews recent academic and technological developments behind silicones and silicone-modified materials.

Download or read book Commercial Applications of Ionic Liquids written by Mark B. Shiflett and published by Springer. This book was released on 2020-02-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the current and emerging industrial applications of ionic liquids, covering the core processes, the practical implementation and technical challenges involved, and exploring potential future directions for research and development. The introductory chapter describes the unique physical and chemical properties of ionic liquids, and illustrates the vast potential for application of these materials across the industrial landscape. Following this, individual chapters written by leading figures from industry and academia address specific processes and products, such as the development of a new chloroaluminate ionic liquid as an alkylation catalyst and a new class of capillary gas chromatography (GC) columns with stationary phases based on ionic liquids. Over the past twenty years, ionic liquids have moved from being considered as mere academic curiosities to having genuine applications in fields as wide-ranging as biotechnology, biorefineries, catalysis, pharmaceuticals, renewable fuels, and sustainable energy. This book highlights several commercial products and processes that use or will soon be using ionic liquids.

Download or read book Ionic Liquids in Chemical Analysis written by Mihkel Koel and published by CRC Press. This book was released on 2008-10-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Overview of a Rapidly Expanding Area in Chemistry Exploring the future in chemical analysis research, Ionic Liquids in Chemical Analysis focuses on materials that promise entirely new ways to perform solution chemistry. It provides a broad overview of the applications of ionic liquids in various areas of analytical chemistry, in

Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.

Download or read book High Pressure Fluid Technology for Green Food Processing written by Tiziana Fornari and published by Springer. This book was released on 2014-10-31 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the fundamentals of high pressure technologies from the perspective of mass transfer phenomena and thermodynamic considerations. Novel food applications are exposed and their relation to chemical analysis, extraction, reaction and particle formation processes are outlined. The chapters are written by a diverse group of scientists with expertise in chemistry, food processes, analytical chemistry, chemical engineering and chemical engineering thermodynamics, and biotechnology. The mission of green food engineering is to promote innovative technologies that reduce or eliminate the use or generation of hazardous materials (solvents, reagents) in the design and operation of food related processes, with the view to improve food safety and quality. Several efficient, environmentally friendly and benign technologies based on the use of high pressure and green solvents have demonstrated to be sustainable alternatives to traditional processes in the food industry. Although hundreds of new ideas are being published in the open literature, reliable engineering tools to simulate and design those processes are still under development. High Pressure Fluid Technology for Green Food Processing presents in-depth analyses and outlines the ways towards their maturity. Tiziana Fornari, Research Institute of Food Science (CIAL) Universidad Autonoma de Madrid, Madrid, Spain Roumiana P. Stateva, Institute of Chemical Engineering, Bulgarian Academy of Sciences, Sofia, Bulgaria

Download or read book Chromatographic Analysis of Pharmaceuticals written by John A. Adamovics and published by Routledge. This book was released on 2017-09-29 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and revised throughout. Second Edition explores the chromatographic methods used for the measurement of drugs, impurities, and excipients in pharmaceutical preparations--such as tablets, ointments, and injectables. Contains a 148-page table listing the chromatographic data of over 1300 drugs and related substances--including sample matrix analyzed, sample handling procedures, column packings, mobile phase, mode of detection, and more.

Download or read book Unified Separation Science written by J. Calvin Giddings and published by Wiley-Interscience. This book was released on 1991-01-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unifies the complex welter of techniques used for chemical separations by clearly formulating the concepts that are common to them. The mass transport phenomena underlying all separation processes are developed in a simple physical-mathematical form. The limitations and optimum performance of alternative separation techniques and the factors enhancing and limiting separation power can thus be described and explored. Generously illustrated and contains numerous exercises. Long awaited in the scientific community, it breaks new ground in understanding separation processes.

Download or read book Reactive and Functional Polymers Volume One written by Tomy J. Gutiérrez and published by Springer Nature. This book was released on 2020-08-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive and functional polymers are manufactured with the aim of improving the performance of unmodified polymers or providing functionality for different applications. These polymers are created mainly through chemical reactions, but there are other important modifications that can be carried out by physical alterations in order to obtain reactive and functional polymers. This volume presents a comprehensive analysis of these reactive and functional polymers. Reactive and Functional Polymers Volume One provides the principles and foundations for the design, development, manufacture and processing of reactive and functional polymers based primarily on biopolymers, polyesters and polyurenthanes. The text provides an in-depth review of updated sources on reactive resins and silicones. In this book, world-renowned researchers have participated, including Dr. Runcang Sun (Associate editor for the journal ‘Carbohydrate Polymers’). With its comprehensive scope and up-to-date coverage of issues and trends in Reactive and Functional Polymers, this is an outstanding book for students, professors, researchers and industrialists working in the field of polymers and plastic materials.

Download or read book Practical Gas Chromatography written by Katja Dettmer-Wilde and published by Springer. This book was released on 2014-11-05 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas chromatography continues to be one of the most widely used analytical techniques, since its applications today expand into fields such as biomarker research or metabolomics. This new practical textbook enables the reader to make full use of gas chromatography. Essential fundamentals and their implications for the practical work at the instrument are provided, as well as details on the instrumentation such as inlet systems, columns and detectors. Specialized techniques from all aspects of GC are introduced ranging from sample preparation, solvent-free injection techniques, and pyrolysis GC, to separation including fast GC and comprehensive GCxGC and finally detection, such as GC-MS and element-specific detection. Various fields of application such as enantiomer, food, flavor and fragrance analysis, physicochemical measurements, forensic toxicology, and clinical analysis are discussed as well as cutting-edge application in metabolomics is covered.

Download or read book Catalyst Separation Recovery and Recycling written by David J. Cole-Hamilton and published by Springer Science & Business Media. This book was released on 2006-01-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at new ways of tackling the problem of separating reaction products from homogeneous catalytic solutions. The new processes involve low leaching supported catalysts, soluble supports such as polymers and dendrimers and unusual solvents such as water, fluorinated organics, ionic liquids and supercritical fluids. The advantages of the different possibilities are discussed alongside suggestions for further research that will be required for commercialisation. Unlike other books, in addition to the chemistry involved, the book looks at the process design that would be required to bring the new approaches to fruition. Comparisons are given with existing processes that have already been successfully applied and examples are given where these approaches are not suitable. The book includes: - New processes for the separation of products from solutions containing homogeneous catalysts - Catalysts on insoluble or soluble supports – fixed bed catalysts - continuous flow or ultrafiltration - Biphasic systems: water - organic, fluorous - organic, ionic liquid – organic, supercritical fluids (monophasic or biphasic with water, organic or ionic liquid) - Comparisons with current processes involving atmospheric or low temperature distillation - Consideration of Chemistry and Process Design - Advantages and disadvantages of each process exposed - Consideration of what else is need for commercialisation

Download or read book Analysis with Supercritical Fluids Extraction and Chromatography written by Bernd Wenclawiak and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of supercritical fluids in analytical chemistry is still grow ing. More and more analysts are discovering the favorable advan tages for a number of applications. Especially supercritical fluid extraction (SFE) has attracted a lot of interest in recent years due to its simplicity. Supercritical fluid chromatography (SFC) has become better established and the development of this technique has been accelerated by the many applications with capillary col umns which have been published in the literature. At first SFC equipment was based on instruments commonly used for liquid chromatography, and the first commercial in struments were derived from this technology. However, capillary columns can be much more easily interfaced to gas chromatogra phy equipment especially to the detectors commonly used for Oc. Many stationary phases both for packed micro columns and capillary columns have been designed for SFC purposes extending this technology to LC and OC. The most common fluid applied in SFC and SFE is carbon dioxide. The advantages of supercritical CO , such as having dif 2 fusivity like a gas and solvating power depending on temperature and pressure, are also valid for other fluids and modified fluids. Both properties are valuable for sample extraction and extraction selectivity.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Advanced Gas Chromatography written by Mustafa Ali Mohd and published by BoD – Books on Demand. This book was released on 2012-03-21 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in agricultural, biomedical and industrial applications' is a compilation of recent advances and developments in gas chromatography and its applications. The chapters cover various aspects of applications ranging from basic biological, biomedical applications to industrial applications. Book chapters analyze new developments in chromatographic columns, microextraction techniques, derivatisation techniques and pyrolysis techniques. The book also includes several aspects of basic chromatography techniques and is suitable for both young and advanced chromatographers. It includes some new developments in chromatography such as multidimensional chromatography, inverse chromatography and some discussions on two-dimensional chromatography. The topics covered include analysis of volatiles, toxicants, indoor air, petroleum hydrocarbons, organometallic compounds and natural products. The chapters were written by experts from various fields and clearly assisted by simple diagrams and tables. This book is highly recommended for chemists as well as non-chemists working in gas chromatography.

Download or read book Solid Phase Extraction written by Nigel J.K. Simpson and published by CRC Press. This book was released on 2000-03-15 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrating the relationship of the basic theory of solid-phase extraction (SPE) to chromatography, this comprehensive reference illustrates how SPE techniques significantly contribute to the preparation of samples for a wide variety of analytical techniques. It provides step-by-step details on the applications of SPE to environmental matrices, broad-spectrum drug screening, veterinary drug abuse, pharmaceutical drug development, biological samples, and high-throughput screening. Written by world-renowned experts in the field, the book contains helpful reference charts, tables of solvent properties, selectivities, molecular acid/base properties, and more.

Download or read book Modern Practice of Gas Chromatography written by Robert L. Grob, PhD and published by John Wiley & Sons. This book was released on 2004-08-04 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bible of gas chromatography-offering everything the professional and the novice need to know about running, maintaining, and interpreting the results from GC Analytical chemists, technicians, and scientists in allied disciplines have come to regard Modern Practice of Gas Chomatography as the standard reference in gas chromatography. In addition to serving as an invaluable reference for the experienced practitioner, this bestselling work provides the beginner with a solid understanding of gas chromatographic theory and basic techniques. This new Fourth Edition incorporates the most recent developments in the field, including entirely new chapters on gas chromatography/mass spectrometry (GC/MS); optimization of separations and computer assistance; high speed or fast gas chromatography; mobile phase requirements: gas system requirements and sample preparation techniques; qualitative and quantitative analysis by GC; updated information on detectors; validation and QA/QC of chromatographic methods; and useful hints for good gas chromatography. As in previous editions, contributing authors have been chosen for their expertise and active participation in their respective areas. Modern Practice of Gas Chromatography, Fourth Edition presents a well-rounded and comprehensive overview of the current state of this important technology, providing a practical reference that will greatly appeal to both experienced chomatographers and novices.