Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
Download or read book Conducting Polymers written by Luiz Carlos Almeida and published by Nova Science Publishers. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by leading experts of the international scientific community, is divided into 10 chapters and gives a comprehensive review of the important aspects of conducting polymers. Synthetic methodologies of these polymers and their nanocomposites along with their electrical and electrochemical properties are described herein. Application of the conducting polymers for sensors, solar cells and lithium batteries are also presented. The editor and all contributors believe the subjects highlighted are important topics in the field of conducting polymers and make this book a very useful scientific support to a large audience of readers, from students to senior researchers in the academic community and from engineers to business people in different industrial sectors.
Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.
Download or read book Chemical Vapor Deposition Polymerization written by Jeffrey B. Fortin and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Vapor Deposition Polymerization - The Growth and Properties of Parylene Thin Films is intended to be valuable to both users and researchers of parylene thin films. It should be particularly useful for those setting up and characterizing their first research deposition system. It provides a good picture of the deposition process and equipment, as well as information on system-to-system variations that is important to consider when designing a deposition system or making modifications to an existing one. Also included are methods to characterizae a deposition system's pumping properties as well as monitor the deposition process via mass spectrometry. There are many references that will lead the reader to further information on the topic being discussed. This text should serve as a useful reference source and handbook for scientists and engineers interested in depositing high quality parylene thin films.
Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.
Download or read book Sol Gel Optics written by Lisa C. Klein and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol--Gel--Optics encompasses numerous schemes for fabricating optical materials from gels -- materials such as bulk optics, optical waveguides, doped oxides for laser and nonlinear optics, gradient refractive index (GRIN) optics, chemical sensors, environmental sensors, and `smart' windows. Sol--Gel--Optics: Processing and Applications provides in-depth coverage of the synthesis and fabrication of these materials and discusses the optics related to microporous, amorphous, crystalline and composite materials. The reader will also find in this book detailed descriptions of new developments in silica optics, bulk optics, waveguides and thin films. Various applications to sensor and device technology are highlighted. For researchers and students looking for novel optical materials, processing methods or device ideas, Sol--Gel--Optics: Processing and Applications surveys a wide array of promising new avenues for further investigation and for innovative applications. (This book is the first in a new subseries entitled `Electronic Materials: Science and Technology).
Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.
Download or read book Macroporous Polymers written by Bo Mattiasson and published by CRC Press. This book was released on 2009-12-23 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macroporous polymers are rapidly becoming the material of choice for many tissue engineering, bioseparation, and bioprocessing applications. However, while important information is scattered about in many different publications, none, to date, have drawn this information together in user-friendly format, until now. Meeting the need for an accessibl
Download or read book Ionic Liquid Crystals written by Giacomo Saielli and published by MDPI. This book was released on 2019-06-24 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we have collected a series of state-of-the art papers written by specialists in the field of ionic liquid crystals (ILCs) to address key questions concerning the synthesis, properties, and applications of ILCs. New compounds exhibiting ionic liquid crystalline phases are presented, both of calamitic as well as discotic type. Their dynamic and structural properties have been investigated with a series of experimental techniques including differential scanning calorimetry, polarized optical spectroscopy, X-ray scattering, and nuclear magnetic resonance, impedance spectroscopy to mention but a few. Moreover, computer simulations using both fully atomistic and highly coarse-grained force fields have been presented, offering an invaluable microscopic view of the structure and dynamics of these fascinating materials.
Download or read book Organic Flexible Electronics written by Piero Cosseddu and published by Woodhead Publishing. This book was released on 2020-09-29 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Electronics is a novel field of electronics that has gained an incredible attention over the past few decades. New materials, device architectures and applications have been continuously introduced by the academic and also industrial communities, and novel topics have raised strong interest in such communities, as molecular doping, thermoelectrics, bioelectronics and many others.Organic Flexible Electronics is mainly divided into three sections. The first part is focused on the fundamentals of organic electronics, such as charge transport models in these systems and new approaches for the design and synthesis of novel molecules. The first section addresses the main challenges that are still open in this field, including the important role of interfaces for achieving high-performing devices or the novel approaches employed for improving reliability issues.The second part discusses the most innovative devices which have been developed in recent years, such as devices for energy harvesting, flexible batteries, high frequency circuits, and flexible devices for tattoo electronics and bioelectronics.Finally the book reviews the most important applications moving from more standard flexible back panels to wearable and textile electronics and more futuristic applications like ingestible systems. - Reviews the fundamental properties and methods for optimizing organic electronic materials including chemical doping and techniques to address stability issues - Discusses the most promising organic electronic devices for energy, electronics, and biomedical applications - Addresses key applications of organic electronic devices in imagers, wearable electronics, bioelectronics
Download or read book Materials for Energy written by Sam Zhang and published by CRC Press. This book was released on 2020-10-05 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses a wide range of material types, such as nanomaterials, carbonaceous electrocatalysts and electrolytes, thin films, phase change materials, 2D energy materials, triboelectric materials, and membrane materials Describes such applications as flexible energy storage devices, sensors, energy storage batteries, fuel and solar cells, photocatalytic wastewater treatment, and more Aimed at researchers and technologists working to solve alternative energy issues
Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.
Download or read book UV Coatings written by Reinhold Schwalm and published by Elsevier. This book was released on 2006-12-21 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since UV curing (light induced polymerisation of multifunctional oligomers) is a very ecoefficient and energy saving curing method, the growth rates of UV curable coatings are in the range of 10% per year. The typical UV coatings are solvent free (100% solids), thus helping the industry and the environment to reduce significantly VOC (volatile organic compounds). Recently, the automotive industry has discovered that UV cured coatings are very scratch resistant, which stimulated very extensive work into the development of UV coatings for automotive applications. Since UV curing is very universal, also other systems besides the 100% solid (typical) UV coatings are developed, like waterbased UV- , UV powder and Dual cure (UV and thermal) systems.UV Coatings contains an overview of the technology, the curing process including the equipment necessary, the raw materials (resins, diluents, photoinitiators) used, the advantages and drawbacks of this fast emerging technology, as well as proposed technical solutions to tackle the disadvantages. Structure-property relationships will be given, especially regarding the mechanical properties of coatings as well as scratch resistance, mainly dealing with automotive performance criteria. The main part of the book will deal with new developments, like water-based UV coatings, UV powder coatings and dual cure systems, cured by UV and thermal energy, which have been developed to cure the coating on three dimensional substrates in shadow areas. The main applications of UV Coatings will be described, starting with the classical ones on temperature sensitive substrates, like wood, paper and plastics, where the UV curable coatings are already well established.* Looking at UV curing as a key to scratch resistant automotive clear coats* Ecoefficiency of UV Coatings* Comprehensive overview of the technology, materials and markets
Download or read book Micro Assembly Technologies and Applications written by Sandra Koelemeijer and published by Springer. This book was released on 2008-03-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-assembly is a key enabling technology for cost effective manufacture of new generations of complex micro products. It is also a critical technology for retaining mdustrial capabilities in high labour cost areas such as Europe since up to 80% of the production cost in some industries is attributed directly to assembly processes. With the continuous trend for product miniaturisation, the scientific and technologi cal developments in micro-assembly are expected to have a significant long-term economic, demographic and social impact. A distinctive feature of the process is that surface forces are often dominant over gravity forces, which determines a number of specific technical challenges. Critical areas which are currently being addressed include development of assembly systems with high positional accuracy, micro gripping methods that take into ac count the adhesive surface forces, high precision micro-feeding techniques and mi cro-joining processes. Micro-assembly has developed rapidly over the last few years and all the pre dictions are that it will remain a critical technology for high value products in a number of key sectors such as healthcare, communications, defence and aerospace. The key challenge is to match the significant technological developments with a new generation of micro products that will establish firmly micro-assembly as a core manufacturing process.
Download or read book Fundamentals of Microfabrication and Nanotechnology Three Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.
Download or read book DNA and RNA Nanobiotechnologies in Medicine Diagnosis and Treatment of Diseases written by Volker A. Erdmann and published by Springer Science & Business Media. This book was released on 2013-06-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide latest insights in the functional potentials of ribonucleic acids in medine and the use of Spiegelmer and Spiegelzyme systems. It will also deal with a new type of delivery systems for cellular targeting.
Download or read book Handbook of Fluoropolymer Science and Technology written by Dennis W. Smith and published by John Wiley & Sons. This book was released on 2014-05-05 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fluoropolymer Science and Technology A comprehensive handbook on fluoropolymer synthesis, characterization, and processing Fluoropolymers, one of the more durable classes of polymer materials, are known to enable novel technologies as a result of their remarkable properties. As key components in industry applications, fluoropolymers have established commercial interest and scientists have discovered more efficient approaches of handling them. This book reviews up-to-date fluoropolymer platforms as well as recently discovered methods for the preparation of fluorinated materials. It focuses on synthesis, characterization, and processing aspects, providing guidelines for practicing scientists and engineers. In addition, the book covers: Concepts and studies from leading international laboratories, including academia, government, and industrial institutions Emerging technologies and applications in energy, optics, space exploration, fuel cells, microelectronics, gas separation membranes, biomedical instrumentation, and more Current environmental concerns associated with fluoropolymers, relevant regulations, and growth opportunities Overall, the chapters provide coverage of chemical methods and help the reader further understand how fluoropolymer research provides solutions for material challenges. The concepts in this book also inspire professionals to identify new markets and funding sources for fluoropolymer research and development.
