EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Synthesis of Compound Semiconducting Materials and Device Applications  Gallium Nitride Light Emitting Diodes

Download or read book Synthesis of Compound Semiconducting Materials and Device Applications Gallium Nitride Light Emitting Diodes written by Stanford University. Center for Materials Research and published by . This book was released on 1973 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The synthesis and characterization of hetero-epitaxial gallium nitride (GaN) films were undertaken with particular reference to the phenomenon of light emission. Gallium nitride was grown by the chemical vapor deposition technique using sapphire substrates. Techniques for characterization included optical, scanning electron, and transmission electron microscopy and measurements of various electrical and optical properties of the films. The thin films of GaN were doped during growth with zinc and magnesium to form n-i junctions. Such material provided the basis for the fabrication of m-i-n light-emitting diodes, which emitted light in the high-energy violet region of the visible spectrum with Mg doping and green light with Zn doping. (Modified author abstract).

Book Synthesis of Compound Semiconducting Materials and Device Applications

Download or read book Synthesis of Compound Semiconducting Materials and Device Applications written by STANFORD UNIV CALIF CENTER FOR MATERIALS RESEARCH. and published by . This book was released on 1973 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: ;Contents: Epitaxial crystal growth; Device applications of GaAs; Relations between dislocations and mechanical properties and the production and characterization of defect structures in compound semiconductors; Scientific aspects of gallium arsenide crystal preparation; The synthesis, characterization and device application of gallium nitride: preparation of GaN light-emitting diodes.

Book Optoelectronic Devices

Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book III nitride Devices and Nanoengineering

Download or read book III nitride Devices and Nanoengineering written by Zhe Chuan Feng and published by World Scientific. This book was released on 2008 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devices, nanoscale science and technologies based on GaN and related materials, have achieved great developments in recent years. New GaN-based devices such as UV detectors, fast p-HEMT and microwave devices are developed far more superior than other semiconductor materials-based devices.Written by renowned experts, the review chapters in this book cover the most important topics and achievements in recent years, discuss progress made by different groups, and suggest future directions. Each chapter also describes the basis of theory and experiment.This book is an invaluable resource for device design and processing engineers, material growers and evaluators, postgraduates and scientists as well as newcomers in the GaN field.

Book CVD of Compound Semiconductors

Download or read book CVD of Compound Semiconductors written by Anthony C. Jones and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical growth methods of electronic materials are the keystone of microelectronic device processing. This book discusses the applications of metalorganic chemistry for the vapor phase deposition of compound semiconductors. Vapor phase methods used for semiconductor deposition and the materials properties that make the organometallic precursors useful in the electronics industry are discussed for a variety of materials. Topics included: * techniques for compound semiconductor growth * metalorganic precursors for III-V MOVPE * metalorganic precursors for II-VI MOVPE * single-source precursors * chemical beam epitaxy * atomic layer epitaxy Several useful appendixes and a critically selected, up-to-date list of references round off this practical handbook for materials scientists, solid-state and organometallic chemists, and engineers.

Book Gallium Nitride

    Book Details:
  • Author : Kiera Olivia Peak
  • Publisher : Nova Science Publishers
  • Release : 2014
  • ISBN : 9781633213876
  • Pages : 0 pages

Download or read book Gallium Nitride written by Kiera Olivia Peak and published by Nova Science Publishers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium nitride (GaN), a member of the family of III-V semiconductor compounds, has been investigated intensively and have found extensive applications. Recent development has suggested that GaN may be used as an excellent host material for light-emitting devices (LEDs) that operate in the blue and ultraviolet region, due to its wide and direct band gap. Nano-materials often present novel properties that are different from the corresponding bulk materials due to their unique structures, high specific surface area and quantum confinement effects. This book discusses several topics on the structure, thermal properties and applications of GaN. Some of these topics include the effects of radiation damage in GaN and and related materials; low-dimensional GaN; structural and dielectric properties of the GaN and silica nanoparticles investigated by molecular dynamics; and GaN bulk and nanostructures for spintronic application.

Book III Nitride Based Light Emitting Diodes and Applications

Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light emitting diodes (LEDs) are already used in traffic signals, signage lighting, and automotive applications. However, its ultimate goal is to replace traditional illumination through LED lamps since LED lighting significantly reduces energy consumption and cuts down on carbon-dioxide emission. Despite dramatic advances in LED technologies (e.g., growth, doping and processing technologies), however, there remain critical issues for further improvements yet to be achieved for the realization of solid-state lighting. This book aims to provide the readers with some contemporary LED issues, which have not been comprehensively discussed in the published books and, on which the performance of LEDs is seriously dependent. For example, most importantly, there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and and In-rich GaN-based semiconductors. The materials quality is directly dependent on the substrates used, such as sapphire, Si, etc. In addition, efficiency droop, growth on different orientations and polarization are also important. Chip processing and packaging technologies are key issues. This book presents a comprehensive review of contemporary LED issues. Given the interest and importance of future research in nitride semiconducting materials and solid state lighting applications, the contents are very timely. The book is composed of chapters written by leading researchers in III-nitride semiconducting materials and device technology. This book will be of interest to scientists and engineers working on LEDs for lighting applications. Postgraduate researchers working on LEDs will also benefit from the issues this book provides.

Book Introduction to Materials Chemistry

Download or read book Introduction to Materials Chemistry written by Harry R. Allcock and published by John Wiley & Sons. This book was released on 2019-09-10 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces the reader to the elementary chemistry on which materials science depends by discussing the different classes of materials and their applications. It shows the reader how different types of materials are produced, why they possess specific properties, and how they are used in technology. Each chapter contains study questions to enable discussions and consolidation of the acquired knowledge. The new edition of this textbook is completely revised and updated to reflect the significant expansion of the field of materials chemistry over the last years, covering now also topics such as graphene, nanotubes, light emitting diodes, extreme photolithography, biomedical materials, and metal organic frameworks. From the reviews of the first edition: "This book is not only informative and comprehensive for a novice reader, but also a valuable resource for a scientist and/or an industrialist for new and novel challenges." (Materials and Manufacturing Process, June 2009) "Allcock provides a clear path by first describing basic chemical principles, then distinguishing between the various major materials groups, and finally enriching the student by offering a variety of special examples." (CHOICE, April 2009) "Proceeding logically from the basics to materials in advanced technology, it covers the fundamentals of materials chemistry, including principles of materials synthesis and materials characterization methods." (Internationale Fachzeitschrift Metall, January 2009)

Book Advances in Hydrochloric Acid Research and Application  2013 Edition

Download or read book Advances in Hydrochloric Acid Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Hydrochloric Acid Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Advances in Hydrochloric Acid Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Hydrochloric Acid Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Book State of the Art Program on Compound Semiconductors XXXVIII and Wide Bandgap Semiconductors for Photonic and Electronic Devices and Sensors III

Download or read book State of the Art Program on Compound Semiconductors XXXVIII and Wide Bandgap Semiconductors for Photonic and Electronic Devices and Sensors III written by Edward B. Stokes and published by The Electrochemical Society. This book was released on 2003 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Harsh Environment Electronics

Download or read book Harsh Environment Electronics written by Ahmed Sharif and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides in-depth knowledge on novel materials that make electronics work under high-temperature and high-pressure conditions This book reviews the state of the art in research and development of lead-free interconnect materials for electronic packaging technology. It identifies the technical barriers to the development and manufacture of high-temperature interconnect materials to investigate into the complexities introduced by harsh conditions. It teaches the techniques adopted and the possible alternatives of interconnect materials to cope with the impacts of extreme temperatures for implementing at industrial scale. The book also examines the application of nanomaterials, current trends within the topic area, and the potential environmental impacts of material usage. Written by world-renowned experts from academia and industry, Harsh Environment Electronics: Interconnect Materials and Performance Assessment covers interconnect materials based on silver, gold, and zinc alloys as well as advanced approaches utilizing polymers and nanomaterials in the first section. The second part is devoted to the performance assessment of the different interconnect materials and their respective environmental impact. -Takes a scientific approach to analyzing and addressing the issues related to interconnect materials involved in high temperature electronics -Reviews all relevant materials used in interconnect technology as well as alternative approaches otherwise neglected in other literature -Highlights emergent research and theoretical concepts in the implementation of different materials in soldering and die-attach applications -Covers wide-bandgap semiconductor device technologies for high temperature and harsh environment applications, transient liquid phase bonding, glass frit based die attach solution for harsh environment, and more -A pivotal reference for professionals, engineers, students, and researchers Harsh Environment Electronics: Interconnect Materials and Performance Assessment is aimed at materials scientists, electrical engineers, and semiconductor physicists, and treats this specialized topic with breadth and depth.

Book Official Gazette of the United States Patent and Trademark Office

Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 1999 with total page 1418 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Minerals Yearbook

Download or read book Minerals Yearbook written by and published by . This book was released on 2010 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Twelfth Annual Technical Report  July 1972 to June 1973

Download or read book Twelfth Annual Technical Report July 1972 to June 1973 written by Stanford University. Center for Materials Research and published by . This book was released on 1973 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy Materials Coordinating Committe  EMaCC   Fiscal Year 1998 Annual Technical Report

Download or read book Energy Materials Coordinating Committe EMaCC Fiscal Year 1998 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Gallium Nitride and Silicon Carbide Power Technologies

Download or read book Gallium Nitride and Silicon Carbide Power Technologies written by K. Shenai and published by The Electrochemical Society. This book was released on 2011 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: