Download or read book MWW Type Titanosilicate written by Peng Wu and published by Springer Science & Business Media. This book was released on 2013-08-04 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of a new generation of selective oxidation titanosilicate catalysts with the MWW topology (Ti-MWW) based on the research achievements of the past 12 years. It gives an overview of the synthesis, structure modification and catalytic properties of Ti-MWW. Ti-MWW can readily be prepared by means of direct hydrothermal synthesis with crystallization-supporting agents, using dual-structure-directing agents and a dry-gel conversion technique. It also can be post-synthesized through unique reversible structure transformation and liquid-phase isomorphous substitution. The structural conversion of Ti-MWW into the materials usable for processing large molecules is summarized. Taking advantage of the structure diversity of the lamellar precursor of Ti-MWW, it can be fully or partially delaminated, and undergo interlayer silylation to obtain a novel structure with larger porosity. In the selective oxidation (alkene epoxidation and ketone/aldehyde ammoximation) with hydrogen peroxide or organic peroxide as an oxidant, the unique catalytic properties of Ti-MWW are described in comparison to conventional titanosilicates such as TS-1 and Ti-Beta.

Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.

Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.

Download or read book Catalysis by Unique Metal Ion Structures in Solid Matrices written by Gabriele Centi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomically dispersed metal cations and small polyatomic cationic structures co-ordinated to the surface of porous matrices exhibit different properties from the same cationic species contained in a bulk oxide or supported on amorphous carriers. This subject is treated to an extensive review, showing how an understanding of it is essential to the development of a new generation of solid catalysts. There are also exciting opportunities to shape the catalytic properties of the transition metal cations in microporous and mesoporous matrices. The book covers both theoretical and experimental aspects, including the distribution of framework Al atoms in Si-rich zeolites, distribution and siting of charge-exchanged metal cations, electronic, adsorptive and catalytic properties of metal cations, and correlation of metal cation structure and siting with catalytic activity.

Download or read book Catalysis by Microporous Materials written by H.K. Beyer and published by Elsevier. This book was released on 1995-05-19 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZEOCAT '95 is the eleventh in the series of symposia devoted to special fields of zeolite chemistry. Six plenary lectures, forty oral and forty-two poster presentations were included in the program. The accepted papers cover every aspect of catalysis on microporous materials. A significant number of the contributions describe the synthesis, modification, instrumental and chemical characterisation of zeolites and other micro- and mesoporous materials. Catalytic reactions involve hydrocarbon cracking, nucleophilic aromatic substitution, methanol to hydrocarbon conversion, hydration of acetylene, various alkylation reactions, redox transformations, Claisen rearrangement, etc.

Download or read book Liquid Phase Oxidation via Heterogeneous Catalysis written by Mario G. Clerici and published by John Wiley & Sons. This book was released on 2013-04-26 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets the stage for environmentally friendly industrial organic syntheses From basic principles to new and emerging industrial applications, this book offers comprehensive coverage of heterogeneous liquid-phase selective oxidation catalysis. It fully examines the synthesis, characterization, and application of catalytic materials for environmentally friendly organic syntheses. Readers will find coverage of all the important classes of catalysts, with an emphasis on their stability and reusability. Liquid Phase Oxidation via Heterogeneous Catalysis features contributions from an international team of leading chemists representing both industry and academia. The book begins with a chapter on environmentally benign oxidants and then covers: Selective oxidations catalyzed by TS-1 and other metal-substituted zeolites Selective catalytic oxidation over ordered nanoporous metallo-aluminophosphates Selective oxidations catalyzed by mesoporous metal-silicates Liquid phase oxidation of organic compounds by supported metal-based catalysts Selective liquid phase oxidations in the presence of supported polyoxometalates Selective oxidations catalyzed by supported metal complexes Liquid phase oxidation of organic compounds by metal-organic frameworks Heterogeneous photocatalysis for selective oxidations with molecular oxygen All the chapters dedicated to specific types of catalysts follow a similar organization and structure, making it easy to compare the advantages and disadvantages of different catalysts. The final chapter examines the latest industrial applications, such as the production of catechol and hydroquinone, cyclohexanone oxime, and propylene oxide. With its unique focus on liquid phase heterogeneous oxidation catalysis, this book enables researchers in organic synthesis and oxidation catalysis to explore and develop promising new catalytic materials and synthetic routes for a broad range of industrial applications.

Download or read book Micro Mesoporous Metallosilicates written by Peng Wu and published by John Wiley & Sons. This book was released on 2024-05-28 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Mesoporous Metallosilicates Up-to-date and in-depth text bridging the technology gap between fundamental research and industry-scale applications of porous materials for catalysis Micro-Mesoporous Metallosilicates: Synthesis, Characterization, and Catalytic Applications comprehensively introduces the chemistry and catalytic technologies of metallosilicates, an important family of microporous crystalline zeolite and heteroatom-containing mesoporous materials, with a primary focus on design synthesis, characterization, theoretical studies, and catalytic applications of titanosilicates, tin-silicates, germanosilicates and Ti-mesosilica, and more. The text covers recent advances in the synthesis of titanosilicates, including hydrothermal synthesis, dry-gel conversion, fluoride-assisted synthesis, and post-synthesis methods, along with the synthesis of metallosilicates with two-dimensional lamellar structures and their structural modifications as well as applications in selective oxidation reactions. The text also discusses synthesis of germanosilicates with specially designed organic structure-directing agents, synthesis and catalytic applications of heteroatom-containing mesoporous silica, and dendritic mesoporous silica nanoparticles with unique wrinkled center-radial structures. Overall, every important porous metallosilicate and its synthesis, characterization, pore engineering, catalytic application, and industrial technique and process are covered. Specific sample topics discussed in Micro-Mesoporous Metallosilicates include: Chemical post-modifications of titanosilicates, in terms of the effects on transfer, adsorption/desorption, and surface reactions X-Ray based techniques, ultraviolet-visible-near infrared spectroscopy, Raman spectroscopy, and solid-state NMR spectroscopy Theoretical calculation as an effective tool and supplement to understand the catalytic active center, structural character, and Brønsted/Lewis acidity Titanosilicates in the liquid-phase epoxidation reaction of propylene and propylene chloride to corresponding epoxides Effects of particle sizes, oxidation state, and location sites of Au nanoparticles, and epoxidation performance of Ti-containing materials Delivering cutting-edge research and bridging the technology gap between fundamental research and industrial applications, Micro-Mesoporous Metallosilicates is a valuable resource for chemists, materials scientists, chemical engineers, and experienced researchers in related fields.

Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.

Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials III written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2010-09-29 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume features 59 peer-reviewed papers from ICCCI2009 on interface characterization and control technology, powder and composite processing, joining, the control of airborne particulates, new metallic glasses, and interface phenomena at high temperature. ICCCI2009 was supported by the Global COE Program “Center of Excellence for Advanced Structural and Functional Materials Design” lead by Professor Tomoyuki Kakeshita at Osaka University, the Project on Joining Technology for New Metallic Glasses and Inorganic Materials, the Institute of Materials Research (IMR) of Tohoku University, the Materials and Structures Laboratory (MSL) of the Tokyo Institute of Technology, Kobe Gakuin University, Hosokawa Powder Technology Foundation, the Japan JSPS 124th Committee, and the Joining and Welding Research Institute (JWRI) of Osaka University. Over 160 scientists and engineers from academia and industry from 18 different countries attended ICCCI2009 to see and discuss 140 invited and contributed presentations and posters on the state-of-the-art of interface characterization and control for particulate materials, joining, and nanotechnology.

Download or read book Ceramic Abstracts written by and published by . This book was released on 2000 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. - Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques - Presents key applications, including biomedical, energy, electronic and environmental - Discusses the most relevant techniques for synthesis, patterning and characterization

Download or read book CJChE written by and published by . This book was released on 1998-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Basic and Applied Aspects of Industrial Catalysis written by T.S.R. Prasada Rao and published by Elsevier. This book was released on 1998-02-25 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the Catalysis Society of India was formed in 1973, it has grown into a vibrant and active professional body serving the Indian catalysis community and acts as a professional link between them and the rest of the world. The Silver Jubilee Symposium of the CSI, the thirteenth in a successful series of national symposia, brought together all those devoted to various aspects of this fascinating interdisciplinary field of catalysis. More than 400 delegates from around the country attended and there was considerable international participation. The scientific programme of the symposium covered different aspects of catalysis, processes based on catalysis and novel catalysis materials for various applications. This volume comprises two eminent scientist award lectures, six plenary lectures, five invited papers and 111 contributed papers which were critically selected from an impressive response to the call for papers.

Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.

Download or read book Hierarchically Structured Porous Materials written by B.-L. Su and published by John Wiley & Sons. This book was released on 2012-04-06 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book devoted to this hot field of science covers materials with bimodal, trimodal and multimodal pore size, with an emphasis on the successful design, synthesis and characterization of all kinds of hierarchically porous materials using different synthesis strategies. It details formation mechanisms related to different synthesis strategies while also introducing natural phenomena of hierarchy and perspectives of hierarchical science in polymers, physics, engineering, biology and life science. Examples are given to illustrate how to design an optimal hierarchically porous material for specific applications ranging from catalysis and separation to biomedicine, photonics, and energy conversion and storage. With individual chapters written by leading experts, this is the authoritative treatment, serving as an essential reference for researchers and beginners alike.

Download or read book Novel Carbon Adsorbents written by Juan M.D. Tascón and published by Elsevier. This book was released on 2012-11-23 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following in the lineage of Adsorption by Carbons (Bottani & Tascon, 2008), this work explores current research within contemporary novel carbon adsorbents. Both basic and applied aspects are discussed for this important class of materials. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - Encompasses fundamental science of adsorption by carbons, in one location, supporting current R&D without extensive literature review - Describes adsorption as it is currently applied to major novel types of carbon materials, including carbon gels, carbide-derived carbons, zeolite-templated carbvons, hydrothermal carbons, carbon nanohorns and graphene - Specific discussion of fuel storage, environmental remediation and biomedical applications, of contemporary interest to many surface chemists and applications-focused researchers

Download or read book Advances in Aerogel Composites for Environmental Remediation written by Aftab Aslam Parwaz Khan and published by Elsevier. This book was released on 2021-06-09 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Aerogel Composites for Environmental Remediation presents both contextual information about aerogels and details about their application in environmental remediation. A wide variety of aerogels are discussed, ranging from common to advanced and from natural to synthetic. By exploring ongoing research and developments in the environmental remediation technologies using aerogel and its composites, this book addresses common day-to-day environmental problems and presents solutions to the use of aerogel materials. The chapters discuss fabrication of various aerogel composites, along with their design and applications toward different environmental remediation technologies. Additionally, the properties and advantages of aerogels are compared and contrasted to those of traditional materials. Given the consistent increase in environmental pollution, there is an urgent need to explore new materials for advances in remediation technology. Advances in Aerogel Composites for Environmental Remediation brings researchers and practitioners in the fields of environmental remediation, environmental science, and engineering to the forefront of remediation technologies with a thorough breakdown of the benefits of and techniques relevant to aerogel composites. Covers basic properties, unique properties, and fabrication techniques of aerogels, from basic silica aerogels to present-day conventional aerogels Discusses most of the major environmental remediation techniques and the advantages of using aerogels for these remediation techniques in comparison to using traditional methods Presents future prospects for utilizing aerogels in modern day-to-day life and in the fabrication of tangible new products