Download or read book Synthesis and Field Emission Properties of Carbon Nanotube Films written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, vertically aligned multiwalled carbon nanotube films were grown by microwave plasma chemical vapor deposition (MWCVD). Through controlling the thickness of the iron thin film, carbon nanotubes with different diameters were obtained. When the thickness of the iron layer was reduced to 0.3-0.5 nm, single-wall and double-wall nanotubes were obtained with a high areal density (~ 1012/cm2) and vertical alignment. Scanning electron microscopy, Raman spectroscopy and high resolution transmission electron microscopy were employed to characterize the as-deposited nanotubes. In addition, a systematic study of the internal structure transition of the carbon nanotubes has been conducted and a growth model was proposed in terms of carbon surface and bulk diffusion. The field emission of the carbon nanotube films has also been explored in this study. Different measurement systems including a variable distance field emission system, a field emission imaging system, and a field electron emission system (FEEM) were employed. The effects of the diameter (multi-wall vs single- and double- wall), the adsorbates, and the temperature on the field emission properties of carbon nanotubes have been exhibited. Finally, two processes including hydrogen plasma etching and re-growth were used to treat the as-deposited film, and an increased emission site density was observed for the re-grown carbon nanotube film.
Download or read book Risk Management Resources written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube and Related Field Emitters written by Yahachi Saito and published by John Wiley & Sons. This book was released on 2010-10-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have novel properties that make them potentially useful in many applications in nanotechnology, electronics, optics and other fields of materials science. These characteristics include extraordinary strength, unique electrical properties, and the fact that they are efficient heat conductors. Field emission is the emission of electrons from the surface of a condensed phase into another phase due to the presence of high electric fields. CNT field emitters are expected to make a breakthrough in the development of field emission display technology and enable miniature X-ray sources that will find a wide variety of applications in electronic devices, industry, and medical and security examinations. This first monograph on the topic covers all aspects in a concise yet comprehensive manner - from the fundamentals to applications. Divided into four sections, the first part discusses the preparation and characterization of carbon nanotubes, while part two is devoted to the field emission properties of carbon nanotubes, including the electron emission mechanism, characteristics of CNT electron sources, and dynamic behavior of CNTs during operation. Part three highlights field emission from other nanomaterials, such as carbon nanowalls, diamond, and silicon and zinc oxide nanowires, before concluding with frontier R&D applications of CNT emitters, from vacuum electronic devices such as field emission displays, to electron sources in electron microscopes, X-ray sources, and microwave amplifiers. Edited by a pioneer in the field, each chapter is written by recognized experts in the respective fields.
Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes represent one of the most exciting research areas in modern science. These molecular-scale carbon tubes are the stiffest and strongest fibres known, with remarkable electronic properties, and potential applications in a wide range of fields. Carbon Nanotube Science is a concise, accessible book, presenting the basic knowledge that graduates and researchers need to know. Based on the successful Carbon Nanotubes and Related Structures, this book focuses solely on carbon nanotubes, covering the major advances made in recent years in this rapidly developing field. Chapters focus on electronic properties, chemical and bimolecular functionalisation, nanotube composites and nanotube-based probes and sensors. The book begins with a comprehensive discussion of synthesis, purification and processing methods. With its comprehensive coverage of this active research field, this book will appeal to researchers in a broad range of disciplines, including nanotechnology, engineering, materials science and physics.
Download or read book Characterization of the Field Emission Properties of Carbon Nanotube Films Formed on Silicon Carbide Substrates by Surface Decomposition written by Michael C. Pochet and published by . This book was released on 2006 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enhanced Field Emission Properties from Carbon Nanotube Emitters Grown on NiCr Alloy Surfaces with Grain Boundary Effect written by and published by . This book was released on 2008 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are known to have exceptional field emission properties such as low turn-on voltage and high current density. Nilsson et al. reported that field emission properties depend highly on the density of the CNT films. The CNTs must have low density in order to minimize electrostatic field screening from neighboring nanotubes. At the same time, the CNT films must have a high number of emitting sites to achieve a desirable current density. Recently, the direct growth of CNTs on metal alloys containing Ni, Cr, and Fe has been shown to be an attractive alternative for fabrication of CNT emitters without requiring a metal catalyst deposition step. Herein, we report the field emission properties of multi-walled carbon nanotube (MWNT) films grown on polished smooth 80/20 and 70/30 NiCr surfaces by thermal chemical vapor deposition. We show that 80/20 NiCr surfaces prohibit growth of MWNTs at the grain boundaries resulting in a lower turn-on field in comparison to a continuous MWNT film obtained with 70/30 NiCr substrates.
Download or read book Field Emission Properties of Carbon Thin Films and Carbon Nanotubes written by Oliver Gröning and published by . This book was released on 1999 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Walled Carbon Nanotubes written by Simone Morais and published by . This book was released on 2019 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery, multi-walled carbon nanotubes (MWCNTs) have received tremendous attention due to their unique electrical, optical, physical, chemical, and mechanical properties. Remarkable advances have been made in the synthesis, purification, structural characterization, functionalization, and application of MWCNTs. Their particular characteristics make them well suited for a plethora of applications in a number of fields, namely nanoelectronics, nanofluids, energy management, (electro)catalysis, materials science, construction of (bio)sensors based on different detection schemes, multifunctional nanoprobes for biomedical imaging, and sorbents for sample preparation or removal of contaminants from wastewater. They are also useful as anti-bacterial agents, drug delivery nanocarriers, etc. The current relevant application areas are countless. This Special Issue presents original research and review articles that address advances, trends, challenges, and future perspectives regarding synthetic routes, structural features, properties, behaviors, and industrial or scientific applications of MWCNTs in established and emerging areas.
Download or read book Studies of the Synthesis and Field Emission Properties of Carbon Nanotubes written by Christopher Andrew Bower and published by . This book was released on 2000 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Download or read book Carbon Nanotubes written by Mohammed Rahman and published by BoD – Books on Demand. This book was released on 2018-04-26 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Carbon Nanotubes - Recent Progress contains a number of recent researches on synthesis, growth, characterization, development, and potential applications on carbon materials especially CNTs in nanoscale. It is a promising novel research from top to bottom that has received a lot of interest in the last few decades. It covers the advanced topics on the physical, chemical, and potential applications of CNTs. Here, the interesting reports on cutting-edge science and technology related to synthesis, morphology, control, hybridization, and prospective applications of CNTs are concluded. This potentially unique work offers various approaches on the R
Download or read book Carbon Nanotubes written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2011-07-20 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are one of the most intriguing new materials with extraordinary properties being discovered in the last decade. The unique structure of carbon nanotubes provides nanotubes with extraordinary mechanical and electrical properties. The outstanding properties that these materials possess have opened new interesting researches areas in nanoscience and nanotechnology. Although nanotubes are very promising in a wide variety of fields, application of individual nanotubes for large scale production has been limited. The main roadblocks, which hinder its use, are limited understanding of its synthesis and electrical properties which lead to difficulty in structure control, existence of impurities, and poor processability. This book makes an attempt to provide indepth study and analysis of various synthesis methods, processing techniques and characterization of carbon nanotubes that will lead to the increased applications of carbon nanotubes.
Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.
Download or read book Characterization of the Field Emission Properties of Carbon Nanotubes Formed on Silicon Carbide Substrates by Surface Decomposition written by and published by . This book was released on 2006 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dense arrays of vertically aligned carbon nanotubes (CNTs) form on the surface of silicon carbide wafers during high temperature anneals under moderate vacuum conditions. The novelty of this growth method is that the CNTs form without the aid of a metal catalyst, allowing for potentially impurity-free CNTs to form. In this study, CNT films were grown by the surface decomposition of silicon carbide substrates. The associated field emission characteristics were investigated to determine if films grown using this method possessed advantages over films grown using metal-catalyzed methods. The associated turn-on and threshold voltages, maximum current density, and emission current stability of the CNT films were measured using a standard vacuum tube diode test configuration. Although the samples tested did not demonstrate improved field emission characteristics when compared to values found in the literature for catalyst-grown CNT films, the data collected compares well with data in the literature and shows that further investigation is warranted regarding the emission capabilities of CNT films formed on SiC by surface decomposition. From the measured CNT data, the lowest turn-on electric field was found to be lower than 3.0 V/micrometers, while exhibiting a high maximum current density of 4.25 mA/sq cm at 6.7 V/micrometers.
Download or read book Nanomaterials Handbook written by Yury Gogotsi and published by CRC Press. This book was released on 2017-08-09 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title features 11 new chapters unique to this edition, including chapters on grain boundaries in graphene, 2D metal carbides and carbonitrides, mechanics of carbon nanotubes and nanomaterials, biomedical applications, oxidation and purification of carbon nanostructures, sintering of nanoceramics, hydrothermal processing, nanofibers, and nanomaterials safety. It offers a comprehensive approach with a focus on inorganic and carbon-based nanomaterials, including fundamentals, applications, synthesis, and characterization. This book also provides a unique angle from the nanomaterial point of view on application, synthesis, and characterization not found in any other nanomaterials book on the market.
Download or read book Carbon Nanotubes written by Ajay Kumar Mishra and published by Nova Science Publishers. This book was released on 2012-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes possess unusual fascinating properties which have attracted the scientific world. This book covers a very wide domain of research and development where the synthesis and properties of carbon nanotubes are discussed. This book describes the carbon nanotube general introduction, various synthesis procedures and properties. This book is going to be beneficial to the researchers who are working for their postgraduate degree in nanomaterials and nanotechnology. This book also provides a platform for all the academics and researchers as it covers a vast background for the recent literature, abbreviations, and summaries. This book will be worth reading for the researchers who are more interested in the general overview of carbon nanotubes, fundamentals concepts and various synthetic procedures in the multidisciplinary areas. This book contains the fundamental knowledge with the recent advancements for the research and development in the field of nanomaterials and nanotechnology.
Download or read book Nanostructured Carbon Electron Emitters and Their Applications written by Yahachi Saito and published by CRC Press. This book was released on 2022-01-27 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon forms a variety of allotropes due to the diverse hybridization of s- and p-electron orbitals, including the time-honored graphite and diamond as well as new forms such as C60 fullerene, nanotubes, graphene, and carbyne. The new family of carbon isotopes—fullerene, nanotubes, graphene, and carbyne—is called “nanostructured carbon” or “nanocarbon.” These isotopes exhibit extreme properties such as ultrahigh mechanical strength, ultrahigh charge–carrier mobility, and high thermal conductivity, attracting considerable attention for their electronic and mechanical applications as well as for exploring new physics and chemistry in the field of basic materials science. Electron sources are important in a wide range of areas, from basic physics and scientific instruments to medical and industrial applications. Carbon nanotubes (CNTs) and graphene behave as excellent electron-field emitters owing to their exceptional properties and offer several benefits compared to traditional cathodes. Field emission (FE) produces very intense electron currents from a small surface area with a narrow energy spread, providing a highly coherent electron beam—a combination that not only provides us with the brightest electron sources but also explores a new field of electron beam–related research. This book presents the enthusiastic research and development of CNT-based FE devices and focuses on the fundamental aspects of FE from nanocarbon materials, including CNTs and graphene, and the latest research findings related to it. It discusses applications of FE to X-ray and UV generation and reviews electron sources in vacuum electronic devices and space thrusters. Finally, it reports on the new forms of carbon produced via FE from CNT.
