Download or read book Carbon Nanomaterial Based Adsorbents for Water Purification written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2020-06-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deterioration of water quality and unavailability of drinkable water are pressing challenges worldwide. The removal of toxic organic and inorganic pollutants from water is vital for a clean environment, as a response to water scarcity. Adsorption-based water technologies are among the most widely used because of their high efficiency and low cost, without relying on a complex infrastructure. In recent years, carbon nanomaterials (CNMs), such as graphene and derivatives, carbon nanotubes, carbon nanofibers, nanoporous carbon, fullerenes, graphitic carbon nitride, and nanodiamonds have been extensively exploited as adsorbents due to their extraordinary surface properties, ease of modification, large surface area, controlled structural varieties, high chemical stability, porosity, low density, ease of regeneration, and reusability. This book provides a thorough overview of the state of the art in carbon nanomaterials as they are used for adsorption applications in water purifications, as well as addressing their toxicological challenges. This volume primarily explores the fundamentals of adsorption, its mechanical aspects, synthesis and properties of CNMs, and adsorption performances of CNMs and their nanocomposites with organic and inorganic materials. Structural engineering and activation processes produce materials with enhanced adsorptive properties and separation efficiencies. Furthermore, the formation of CNMs with 2D and 3D macro-and microstructures and high porosities is a potential approach to improve adsorption performances and extend CNM use at the industrial level. The book also addresses important issues regarding these adsorbents that potentially affect future research and industrial applications of carbon-based nanoadsorbents in water security. - Presents advances in multifunctional 3D superstructures of carbon nanomaterials and their composites for adsorption applications - Outlines the fundamentals on synthesis and characterization techniques of carbon-based nanostructures and their composites - Assesses the major toxicological challenges in using nanostructured materials as adsorbents for water purification
Download or read book Photoelectrocatalysis written by Leonardo Palmisano and published by Elsevier. This book was released on 2022-10-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrocatalysis: Fundamentals and Applications presents an in-depth review of the topic for students and researchersworking on photoelectrocatalysis-related subjects from pure chemistry to materials and environmental chemistry inorder to propose applications and new perspectives. The main advantage of a photoelectrocatalytic process is the mildexperimental conditions under which the reactions are carried out, which are often possible at atmospheric pressure androom temperature using cheap and nontoxic solvents (e.g., water), oxidants (e.g., O2 from the air), catalytic materials (e.g.,TiO2 on Ti layer), and the potential exploitation of solar light. This book presents the fundamentals and the applications of photoelectrocatalysis, such as hydrogen production fromwater splitting, the remediation of harmful compounds, and CO2 reduction. Photoelectrocatalytic reactors and lightsources, in addition to kinetic aspects, are presented along with an exploration of the relationship between photocatalysisand electrocatalysis. In addition, photocorrosion issues and the application of selective photoelectrocatalytic organictransformations, which is now a growing field of research, are also reported. Finally, the advantages/disadvantages andfuture perspectives of photoelectrocatalysis are highlighted through the possibility of working at a pilot/industrial scale inenvironmentally friendly conditions. - Presents the fundamentals of photoelectrocatalysis - Outlines photoelectrocatalytic green chemistry - Reviews photoelectrocatalytic remediation of harmful compounds, hydrogen production, and CO2 reduction - Includes photocorrosion, photoelectrocatalytic reactors, and modeling along with kinetic aspects
Download or read book Electro Fenton Process written by Minghua Zhou and published by Springer. This book was released on 2017-11-25 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the theoretical fundamentals and potential applications of the original electro-Fenton (EF) process and its most innovative and promising versions, all of which are classified as electrochemical advanced oxidation processes. It consists of 15 chapters that review the latest advances and trends, material selection, reaction and reactor modeling and EF scale-up. It particularly focuses on the applications of EF process in the treatment of toxic and persistent organic pollutants in water and soil, showing highly efficient removal for both lab-scale and pre-pilot setups. Indeed, the EF technology is now mature enough to be brought to market, and this collection of contributions from leading experts in the field constitutes a timely milestone for scientists and engineers.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Polymer Nanocomposites written by Xingyi Huang and published by Springer. This book was released on 2016-05-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental principles and recent progress in the field of electrical and thermal properties of polymer nanocomposites. The physical and chemical natures determining the electrical and thermal properties of polymer nanocomposites are discussed in detail. The authors describe the range of traditional and emerging polymer nanocomposites from nanoparticle and polymer composites to novel nanostructure based polymer nanocomposites. They include novel properties and potential applications, such as high-k, low-k, high thermal conductivity, antistatic, high voltage insulation, electric stress control, and thermal energy conversion among others.
Download or read book Adsorption from Aqueous Solution written by and published by . This book was released on 1968 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combined and Hybrid Adsorbents written by José M. Loureiro and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows up an Advanced Research Workshop dedicated to the subject of adsorption. It presents an up-to-date review of the latest achievements in the synthesis, characterization and applications of hybrid organic-inorganic materials and of carbon and combined adsorbents. The modeling of the adsorption process, including the simulation of carbon masks used for both civil and military protection purposes is also addressed. Includes applications in environmental, military and post-disaster situations.
Download or read book Extracting Bioactive Compounds for Food Products written by M. Angela A. Meireles and published by CRC Press. This book was released on 2008-12-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for functional foods and neutraceuticals is on the rise, leaving product development companies racing to improve bioactive compound extraction methods - a key component of functional foods and neutraceuticals development. From established processes such as steam distillation to emerging techniques like supercritical fluid technology, Ext
Download or read book Bioremediation and Sustainable Technologies for Cleaner Environment written by Marimuthu Prashanthi and published by Springer. This book was released on 2017-03-14 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers insights into the current focus and recent advances in bioremediation and green technology applications for waste minimization and pollution control. Increasing urbanization has an impact on the environment, agriculture and industry, exacerbating the pollution problem and creating an urgent need for sustainable and green eco-friendly remediation technology. Currently, there is heightened interest in environmental research, especially in the area of pollution remediation and waste conversion, and alternative, eco-friendly methods involving better usage of agricultural residues as economically viable substrates for environmental cleanup are still required. The book offers researchers and scholars inspiration, and suggests directions for specific waste management and pollution control. The research presented makes a valuable contribution toward a sustainable and eco-friendly societal environment.
Download or read book A New Generation Material Graphene Applications in Water Technology written by Mu. Naushad and published by Springer. This book was released on 2018-06-20 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unique collection of up-to-date applications of graphene for water science. Because water is an invaluable resource and the intelligent use and maintenance of water supplies is one of the most important and crucial challenges that stand before mankind, new technologies are constantly being sought to lower the cost and footprint of processes that make use of water resources as potable water as well as water for agriculture and industry, which are always in desperate demand. Much research is focused on graphene for different water treatment uses. Graphene, whose discovery won the 2010 Nobel Prize in physics, has been a shining star in the material science in the past few years. Owing to its interesting electrical, optical, mechanical and chemical properties, graphene has found potential applications in a wide range of areas, including water purification technology. A new type of graphene-based filter could be the key to managing the global water crisis. According to the World Economic Forum's Global Risks Report, lack of access to safe, clean water is the biggest risk to society over the coming decade. Yet some of these risks could be mitigated by the development of this filter, which is so strong and stable that it can be used for extended periods in the harshest corrosive environments, and with less maintenance than other filters on the market. The graphene-based filter could be used to filter chemicals, viruses, or bacteria from a range of liquids. It could be used to purify water, dairy products or wine, or in the production of pharmaceuticals. This book provides practical information to all those who are involved in this field.
Download or read book Characterization of Natural Organic Matter in Drinking Water written by Jean-Phillipe Croue and published by American Water Works Association. This book was released on 2000 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research reported on here sought to characterize natural organic matter (NOM) in dilute solutions and to isolate it without altering its properties, so that the effect of NOM in drinking water may be considered. Several NOM isolation methods were evaluated, including evaporation, reverse osmosis, nanofiltration, and adsorption. The effects of such isolation procedures on NOM's chemical composition and reactivity were considered. Based on these studies, the report presents conclusions regarding the feasibility and adequacy of in situ and ex situ techniques. Croue is affiliated with Laboratoire de Chimie de l'Eau de l'Environment, Universite de Poiters. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Adsorption Technology written by Frank L. Slejko and published by CRC Press. This book was released on 1985-03-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the non-specialist involved with evaluating adsorption technology for specific applications, Adsorption Technology provides a timely, hands-on source of step-by-step fundamentals required to meet the needs of all types of adsorption situations. Presenting theoretical and practical information adaptable to granular activated carbon as well as synthetic adsorbents, this illustrated, easy-to-use guide offers convenient access to: principles of adsorption theory, isotherms, and the physical basis for mathematical models ... understanding of laboratory experiments needed to screen adsorbents for new applications ... procedures for testing and evaluating adsorbents in pilot plant studies ... methods for developing conceptual flowsheets for subsequent engineering cost estimating ... and more. With this important reference, industrial process, chemical, and environmental engineers and chemists now have a dependable single source to turn to for a solid, working understanding of applied adsorption technology. Moreover, this volume is an ideal text for graduate-level courses in chemical and environmental engineering, as well as continuing education courses and professional seminars. Book jacket.
Download or read book Microemulsion Systems written by Henri L. Rosano and published by CRC Press. This book was released on 1987-03-27 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic and Carbon Gels written by Ana Arenillas and published by Springer. This book was released on 2019-06-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Age Environmental Problems and their Remediation written by Mohammad Oves and published by Springer. This book was released on 2018-08-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a novel picture in current advances in research of theoretical and practical frameworks of environmental problems and solutions taken from the latest empirical research findings. The book deals with basic concepts and principles of process, modern biochemical and molecular approaches, genomics and metagenomics, proteomics, remediation strategies of various hazardous pollutants, microbial carbon sequestration and remediation, phytoremediation, bioleaching, biosorption, upscaling of systems, and considers the merit and demerits based on the current literature related to environmental problems and solutions. The book is aimed at professionals, researchers, academicians, and students who would like to improve their understanding of the strategic role of environment protection and advanced applied technologies at different levels. It will be useful for the experienced engineer or scientist working in the field.
Download or read book Nanopapers written by Wenyi Huang and published by William Andrew. This book was released on 2017-10-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanopapers: From Nanochemistry and Nanomanufacturing to Advanced Applications gives a comprehensive overview of the emerging technology of nanopapers. Exploring the latest developments on nanopapers in nanomaterials chemistry and nanomanufacturing technologies, this book outlines the unique properties of nanopapers and their advanced applications. Nanopapers are thin sheets or films made of nanomaterials such as carbon nanotubes, carbon nanofibers, nanoclays, cellulose nanofibrils, and graphene nanoplatelets. Noticeably, nanopapers allow highly concentrated nanoparticles to be tightly packed in a thin film to reach unique properties such as very high electrical and thermal conductivities, very low diffusivity, and strong corrosion resistance that are shared by conventional polymer nanocomposites. This book presents a concise introduction to nanopapers, covering concepts, terminology and applications. It outlines both current applications and future possibilities, and will be of great use to nanochemistry and nanomanufacturing researchers and engineers who want to learn more about how nanopapers can be applied. - Outlines the main uses of nanopapers, showing readers how this emerging technology should best be applied - Shows how the unique properties of nanopapers make them adaptable for use in a wide range of applications - Explores methods for the nanomanufacture of nanopapers
Download or read book Photocatalytic Degradation of Dyes written by Sushma Dave and published by Elsevier. This book was released on 2021-08-09 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalytic Degradation of Dyes: Current Trends and Future Perspectives covers in detail current trends and future aspects on photocatalytic degradation of organic dyes using novel photocatalytic techniques such as metallic nanoparticles, heterogeneous and hybrid systems using visible light irradiation. It highlights the most recent scientific and technological achievements and importance of degradation of dyes in the textile effluent by simple environmental friendly approaches using eco-friendly catalysts. It is of assistance to everyone interested in bioremediation of effluents: professionals, consulting engineers, academicians, and research scholars as well. - Describes the basic photocatalytic techniques and their application in wastewater treatment - Covers the key reactive species accounting for the photodegradation of different dyes, providing helpful guidelines that could be applied to foster the development of efficient photodegradation systems - Includes Description of a wide variety of catalysts and their application in degradation of dyes in the effluent of variable matrices (such as textile effluent, pharmaceutical industry effluent, food industry effluent) - Presents the application of doped semiconductors in the degradation of dyes, hybrid systems and their importance in the dye degradation - Describes the biological synthesis of metallic nanostructures and their use in dye degradation using visible range of light irradiation - Discusses the mechanistic aspect of the dye degradation using photo catalysts