Download or read book Synthesis and Characterization of Undoped and Doped ZnO Nanoparticles Prepared by Sol gel Process written by Abdub Guyo Ali and published by . This book was released on 2009 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
Download or read book Synthesis of Zinc Oxide by Sol Gel Method for Photoelectrochemical Cells written by Siti Salwa Alias and published by Springer Science & Business Media. This book was released on 2013-11-20 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the study of synthesized ZnO powder using Zn(CH3COO)2∙2H2O precursor, methanol (as solvent), and sodium hydroxide (NaOH) to vary the pH. The successfully synthesized ZnO powder from the sol-gel centrifugation and sol-gel storage methods were characterized and investigated by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, UV–visible spectroscopy, and photoluminescence test to compare the properties of the nanoparticles. The best characteristic of the ZnO powder from both methods was observed when the powders were coated on an ITO glass to fabricate a PEC. The current density–voltage performances of both PECs were investigated under luminescent and dark conditions.
Download or read book Chemical Vapor Synthesis and Characterization of Undoped Doped and Functionalized ZnO Nanoparticles written by Moazzam Ali and published by . This book was released on 2010 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Characterization of ZnO Graphene Nanostructures for Electronics and Photocatalysis written by Seyed Ebrahim Chalangar and published by Linköping University Electronic Press. This book was released on 2021-04-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid development of electronics and electro-optical devices demands affordable and reliable materials with enhanced performance. Forming nanocomposites of already well-known materials is one possible route towards novel functional materials with desirable synergistic enhanced properties. Incompatible chemical properties, mismatched crystal structures and weak bonding interactions between the substances, however, often limit the number of possible nanocomposites. Moreover, using an inexpensive, facile, large-area and flexible fabrication technique is crucial to employ the new composites in industrially viable applications. This thesis focuses on the synthesis and characterization of different zinc oxide/graphene (ZnO/GR) nanocomposites, well suited for optoelectronics and photocatalysis applications. Two different approaches of i) substrate-free random synthesis, and ii) template-assisted selective area synthesis were studied in detail. In the first approach, ZnO nanoparticles/rods were grown on GR. The obtained nanocomposites were investigated for better GR dispersity, electrical conductivity and optical properties. Besides, by adding silver iodide to the nanocomposite, an enhanced plasmonic solar-driven photocatalyst was synthesized and analyzed. In the second approach, arrays of single, vertically aligned ZnO nanorods were synthesized using a colloidal lithography-patterned sol-gel ZnO seed layer. Our demonstrated nanofabrication technique with simple, substrate independent, and large wafer-scale area compatibility improved the alignment and surface density of ZnO nanorods over large selective growth areas. Eventually, we found a novel method to further enhance the vertical alignment of the ZnO nanorods by introducing a GR buffer layer between the Si substrate and the ZnO seed layer, together with the mentioned patterning technique. The synthesized nanocomposites were analyzed using a large variety of experimental techniques including electron microscopy, photoelectron spectroscopy, x-ray diffraction, photoluminescence and cathodoluminescence spectroscopy for in-depth studies of their morphology, chemical and optical properties. Our findings show that the designed ZnO/GR nanocomposites with vertically aligned ZnO nanorods of high crystalline quality, synthesized with the developed low-cost nanofabrication technique, can lead to novel devices offering higher performance at a significantly lower fabrication cost.
Download or read book Nanostructured Materials written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2017-07-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: There continues to be a worldwide interest in the size-dependent properties of nanostructured materials and their applications in many diverse fields such as catalysis, sensors, energy conversion processes, and biomedicine to name a few. The eleven chapters of this book written by different researchers include four chapters on the different methods of fabrication of specific materials followed by characterization of their properties, and the remaining seven chapters focusing on the fabrications and applications including three chapters on biomedical applications, two chapters on sensors, one chapter on solar cells, and one chapter on the use of nanoparticles in herbicides. These chapters provide up-to-date reviews useful for current and future researchers in these specific areas.
Download or read book Zinc Oxide Nanostructures written by Magnus Willander and published by CRC Press. This book was released on 2014-07-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide (ZnO) in its nanostructured form is emerging as a promising material with great potential for the development of many smart electronic devices. This book presents up-to-date information about various synthesis methods to obtain device-quality ZnO nanostructures. It describes both high-temperature (over 100 C) and low-temperature (under
Download or read book Synthesis and Characterization of Some Nanostructured Materials for Visible Light driven Photo Processes written by Rania Elhadi Adam and published by Linköping University Electronic Press. This book was released on 2020-03-18 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials for visible light driven photo-processes such as photodegradation of organic pollutants and photoelectrochemical (PEC) water oxidation for hydrogen production are very attractive because of the positive impact on the environment. Metal oxides-based nanostructures are widely used in these photoprocesses due to their unique properties. But single nanostructured metal oxide material might suffer from low efficiency and instability in aqueous solutions under visible light. These facts make it important to have an efficient and reliable nanocomposite for the photo-processes. The combination of different nanomaterials to form a composite configuration can produce a material with new properties. The new properties which are due to the synergetic effect, are a combination of the properties of all the counterparts of the nanocomposite. Zinc oxides (ZnO) have unique optical and electrical properties which grant it to be used in optoelectronics, sensors, solar cells, nanogenerators, and photocatalysis activities. Although ZnO absorbs visible light from the sun due to the deep level band, it mainly absorbs ultraviolet wavelengths which constitute a small portion of the whole solar spectrum range. Also, ZnO has a problem with the high recombination rate of the photogenerated electrons. These problems might reduce its applicability to the photo-process. Therefore, our aim is to develop and investigate different nanocomposites materials based on the ZnO nanostructures for the enhancement of photocatalysis processes using the visible solar light as a green source of energy. Two photo-processes were applied to examine the developed nanocomposites through photocatalysis: (1) the photodegradation of organic dyes, (2) PEC water splitting. In the first photo-process, we used the ZnO nanoparticles (NPs), Magnesium (Mg)-doped ZnO NPs, and plasmonic ZnO/graphene-based nanocomposite for the decomposition of some organic dyes that have been used in industries. For the second photo-process, ZnO photoelectrode composite with different silver-based semiconductors to enhance the performance of the ZnO photoelectrode was used for PEC reaction analysis to perform water splitting. The characterization and photocatalysis experiment results showed remarkable enhancement in the photocatalysis efficiency of the synthesized nanocomposites. The observed improved properties of the ZnO are due to the synergetic effects are caused by the addition of the other nanomaterials. Hence, the present thesis attends to the synthesis and characterization of some nanostructured materials composite with ZnO that are promising candidates for visible light-driven photo-processes.
Download or read book EMR ESR EPR Spectroscopy for Characterization of Nanomaterials written by Ashutosh Kumar Shukla and published by Springer. This book was released on 2016-11-09 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter of this book is the application of EMR/ESR/EPR spectroscopy for characterization of nanomaterials. Initial chapters deal with nanomaterials and their classification. Characterization of metallic nanoparticles, metal oxide nanoparticles and rare earth impurity doped nanoparticles from the (ESR) spectrum parameters are covered in the chapters that follow. A special feature of the book is EMR/ESR/EPR spectroscopic characterization of nanoparticles which are important due to their bactericidal and anticancerous properties. Strength of continuous wave (CW) is explained with the help of suitable examples. The book focuses on applications and data interpretation avoiding extensive use of mathematics so that it also caters to the need of young scientists in the life science disciplines. The book includes a comparison with other spectroscopic characterization methods so as to give an integrated approach to the reader. It will prove useful to biomedical scientists and engineers, chemists, and materials engineers in student, researcher, and practitioner positions.
Download or read book Growth and Characterization ZnO Nanoparticles by Sol gel Process written by Jatani Ungula and published by . This book was released on 2015 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Zinc Oxide Nanostructures Synthesis and Characterization written by Sotirios Baskoutas and published by MDPI. This book was released on 2018-12-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Zinc Oxide Nanostructures: Synthesis and Characterization" that was published in Materials
Download or read book Zinc Oxide written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic, authoritative and thorough treatment in one comprehensive volume presents the fundamentals and technologies of the topic, elucidating all aspects of ZnO materials and devices. Following an introduction, the authors look at the general properties of ZnO, as well as its growth, optical processes, doping and ZnO-based dilute magnetic semiconductors. Concluding sections treat bandgap engineering, processing and ZnO nanostructures and nanodevices. Of interest to device engineers, physicists, and semiconductor and solid state scientists in general.
Download or read book Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy written by Bekkay Hajji and published by Springer. This book was released on 2018-08-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.
Download or read book Nanoparticles for Biomedical Applications written by Eun Ji Chung and published by Elsevier. This book was released on 2019-11-19 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticles for Biomedical Applications: Fundamental Concepts, Biological Interactions and Clinical Applications brings into one place information on the design and biomedical applications of different classes of nanoparticles. While aspects are dealt with in individual journal articles, there is not one source that covers this area comprehensively. This book fills this gap in the literature. - Outlines an in-depth review of biomedical applications of a variety of nanoparticle classes - Discusses the major techniques for designing nanoparticles for use in biomedicine - Explores safety and regulatory aspects for the use of nanoparticles in biomedicine
Download or read book Synthesis and Characterization of Mn DOPED ZnO Nanoparticles written by and published by . This book was released on 2012 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perovskites and Related Mixed Oxides written by Pascal Granger and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook and ready reference details all the main achievements in the field of perovskite-based and related mixed-oxide materials. The authors discuss, in an unbiased manner, the potentials as well as the challenges related to their use, thus offering new perspectives for research and development on both an academic and industrial level. The first volume begins by summarizing the different synthesis routes from molten salts at high temperatures to colloidal crystal template methods, before going on to focus on the physical properties of the resulting materials and their related applications in the fields of electronics, energy harvesting, and storage as well as electromechanics and superconductivity. The second volume is dedicated to the catalytic applications of perovskites and related mixed oxides, including, but not limited to total oxidation of hydrocarbons, dry reforming of methane and denitrogenation. The concluding section deals with the development of chemical reactors and novel perovskite-based applications, such as fuel cells and high-performance ceramic membranes. Throughout, the contributions clearly point out the intimate links between structure, properties and applications of these materials, making this an invaluable tool for materials scientists and for catalytic and physical chemists.
Download or read book Green Synthesis of Nanomaterials for Bioenergy Applications written by Neha Srivastava and published by John Wiley & Sons. This book was released on 2020-11-09 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative summary of the quest for an environmentally sustainable synthesis process of nanomaterials and their application for environmental sustainability Green Synthesis of Nanomaterials for Bioenergy Applications is an important guide that provides information on the fabrication of nanomaterial and the application of low cost, green methods. The book also explores the impact on various existing bioenergy approaches. Throughout the book, the contributors—noted experts on the topic—offer a reliable summary of the quest for an environmentally sustainable synthesis process of nanomaterials and their application to the field of environmental sustainability. The green synthesis of nanoparticles process has been widely accepted as a promising technique that can be applied to a variety of fields. The green nanotechnology-based production processes to fabricate nanomaterials operates under green conditions without the intervention of toxic chemicals. The book’s exploration of more reliable and sustainable processes for the synthesis of nanomaterials, can lead to the commercial application of the economically viability of low-cost biofuels production. This important book: Summarizes the quest for an environmentally sustainable synthesis process of nanomaterials for their application to the field of environmental sustainability Offers an alternate, sustainable green energy approach that can be commercially implemented worldwide Covers recent approaches such as fabrication of nanomaterial that apply low cost, green methods and examines its impact on various existing bioenergy applications Written for researchers, academics and students of nanotechnology, nanosciences, bioenergy, material science, environmental sciences, and pollution control, Green Synthesis of Nanomaterials for Bioenergy Applications is a must-have guide that covers green synthesis and characterization of nanomaterials for cost effective bioenergy applications.
