Download or read book Graphene Science Handbook Six Volume Set written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-26 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the strongest material ever studied and can be an efficient substitute for silicon. This six-volume handbook focuses on fabrication methods, nanostructure and atomic arrangement, electrical and optical properties, mechanical and chemical properties, size-dependent properties, and applications and industrialization. There is no other major reference work of this scope on the topic of graphene, which is one of the most researched materials of the twenty-first century. The set includes contributions from top researchers in the field and a foreword written by two Nobel laureates in physics. Volumes in the set: K20503 Graphene Science Handbook: Mechanical and Chemical Properties (ISBN: 9781466591233) K20505 Graphene Science Handbook: Fabrication Methods (ISBN: 9781466591271) K20507 Graphene Science Handbook: Electrical and Optical Properties (ISBN: 9781466591318) K20508 Graphene Science Handbook: Applications and Industrialization (ISBN: 9781466591332) K20509 Graphene Science Handbook: Size-Dependent Properties (ISBN: 9781466591356) K20510 Graphene Science Handbook: Nanostructure and Atomic Arrangement (ISBN: 9781466591370)
Download or read book Graphene and its Derivatives Volume 2 written by Kaustubha Mohanty and published by Springer Nature. This book was released on 2023-08-23 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the essential characteristics of graphene, graphene oxide, reduced graphene oxide, and its nanocomposite and their applications in water and wastewater treatment and other environmental issues. The book introduces each topic in detail, discusses the basic principles, and analyzes and summarizes recent developments in the field. Various topics covered in this book include role of graphene as a potential material in photocatalytic organic pollutant degradation, water splitting applications, capacitive de-ionization techniques, air purification, gas adsorption, and decontamination of pathogenic microorganisms. Given the contents, the book is useful for students, researchers, and professionals working in the area environmental science and materials, especially graphene oxide, graphene, and graphene nanocomposite.
Download or read book Carbon Nanomaterials Based on Graphene Nanosheets written by Ling Bing Kong and published by CRC Press. This book was released on 2017-03-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the discovery of graphene, it has become one of the most widely and extensively studied materials. This book aims to summarize the progress in synthesis, processing, characterization and applications of a special group of nanocarbon materials derived from graphene or graphene related derivatives by using various strategies in different forms. More specifically, three forms of macrosized materials are presented, i.e., one-dimension or 1D (fibers, wires, yarns, streads, etc.), two-dimension or 2D (films, membranes, papers, sheets, etc.) and three-dimension or 3D (bulk, hydrogels, aerogels, foams, sponges, etc.). Seven chapters are included with the first chapter serving to introduce the concept, definition, and nomenclature of graphene, graphene oxide and their derivatives. The main topics are covered in Chapters 2‒7. Although they have coherent connections, each chapter of them is designed such that they can be studied independently. The target readers of this book include undergraduate students, postgraduate students, researchers, designers, engineers, professors, and program/project managers from the fields of materials science and engineering, applied physics, chemical engineering, biomaterials, materials manufacturing and design, institutes, and research founding agencies.
Download or read book Handbook of Graphene Volume 4 written by Cengiz Ozkan and published by John Wiley & Sons. This book was released on 2019-06-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth volume in a series of handbooks on graphene research and applications The Handbook of Graphene, Volume 4: Composites looks at composite materials exclusively. Topics covered include graphene composites and graphene-reinforced advanced composite materials. The following graphene-based subjects are discussed: ceramic composites; composite nanostructures; composites with shape memory effect; and scroll structures. Chapters also address: the fabrication and properties of copper graphene composites; graphene metal oxide composite as an anode material in li-ion batteries; supramolecular graphene-based systems for drug delivery; and other graphene-related areas of interest to scientists and researchers.
Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.
Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-01-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal9;]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.
Download or read book Oxide Thin Films Multilayers and Nanocomposites written by Paolo Mele and published by Springer. This book was released on 2015-03-26 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the science of nanostructured oxides. It details the fundamental techniques and methodologies involved in oxides thin film and bulk growth, characterization and device processing, as well as heterostructures. Both, experts in oxide nanostructures and experts in thin film heteroepitaxy, contribute the interactions described within this book.
Download or read book Materials Science in Photocatalysis written by Elisa I. Garcia Lopez and published by Elsevier. This book was released on 2021-08-17 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science in Photocatalysis provides a complete overview of the different semiconductor materials, from titania to third-generation photocatalysts, examining the increasing complexity and novelty of the materials science in photocatalytic materials. The book describes the most recommended synthesis procedure for each of them and the suitable characterization techniques for determining the optical, structural, morphological, and physical-chemical properties. The most suitable applications of the photocatalysts are described in detail, as well as their environmental applications for wastewater treatment, gaseous effluents depollution, water splitting, CO2 ?xation, selective organic synthesis, coupling reactions, and other selective transformations under both UV light and visible-light irradiation. This book offers a useful reference for a wide audience from students studying chemical engineering and materials chemistry to experienced researchers working on chemical engineering, materials science, materials engineering, environment engineering, nanotechnology, and green chemistry. Includes a complete overview of the different semiconductor materials used as photocatalysts Describes methods of preparation and characterization of photocatalysts and their applications Examines new possibilities to prepare effective photocatalysts
Download or read book Graphene written by Wonbong Choi and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 20th century, graphene-a one-atom-thick planar sheet of sp2-bonded carbon atoms densely packed in a honeycomb crystal lattice-has garnered appreciable attention as a potential next-generation electronic material due to its exceptional properties. These properties include high current density, ballistic transport, chemical inertness,
Download or read book Nanocomposites written by and published by BoD – Books on Demand. This book was released on 2024-09-25 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the development, characterization, and applications of nanocomposites, which are advanced materials obtained through the combination of two or more constituents, with one being a continuous phase (matrix) and the other being a discontinuous or dispersed nanophase. Nanocomposites have gained significant attention due to their excellent properties and multiple applications, resulting from synergistic effects between the matrix and reinforced nanophase. Nanocomposites offer advantages over individual nanoparticles in tailoring properties, enhancing stability, and optimizing performance for specific applications. This book emphasizes the vast potential of nanocomposites in various areas, including water treatment, food packaging, automotive compounds, biomedical devices, coatings, sensors, pharmaceuticals, and fuel cells, among others. The properties of nanocomposites are highly dependent on their structure and dimensions, and further research is needed to better understand the structure-property relationship in these systems. The book includes sixteen chapters organized into four sections: “Carbon-Based Nanocomposites”, “Inorganic Nanoparticles-Based Nanocomposites”, “Nanocomposites for Environmental Applications”, and “Nanocomposites for Biomedical Applications”.
Download or read book Graphene Science Handbook written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-27 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores Chemical-Based, Non-Chemical Based, and Advanced Fabrication MethodsThe Graphene Science Handbook is a six-volume set that describes graphene's special structural, electrical, and chemical properties. The book considers how these properties can be used in different applications (including the development of batteries, fuel cells, photovolt
Download or read book Green Photocatalytic Semiconductors written by Seema Garg and published by Springer Nature. This book was released on 2021-09-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a detailed overview on the role of photocatalysts for environmental remediation, hydrogen production and carbon dioxide reduction. Effective ways to enhance the photocatalytic activity of the material via doping, hybrid material, laser light and nanocomposites have been discussed in this book. The book also further elaborates the role of metal nanoparticles, rare earth doping, sensitizers, surface oxygen vacancy, interface engineering and band gap engineering for enhancing the photocatalytic activity. An approach to recover the photocatalytic material via immobilization is also presented. This book brings to light much of the recent research in the development of such semiconductor photocatalytic systems. The book will thus be of relevance to researchers in the field of: material science, environmental science & technology, photocatalytic applications, newer methods of energy generation & conversion and industrial applications.
Download or read book Nanostructured Photocatalysts written by Hiromi Yamashita and published by Springer. This book was released on 2016-05-03 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on semiconductor TiO2 photocatalysis are legion, nanostructured controlled photocatalysts are attractive beyond standard semiconductors, and this book is devoted to the many novel uses of advanced TiO2 and MOF-based photocatalysts. Details on synthesis, characterization, and reaction applications of nanostructured photocatalysts are summarized. Other new materials discussed in this book are Bi- W- oxides, metal complexes, and unique porous materials. This book contains methods of preparation and characterization of unique nanostructured photocatalysts, and details about their catalytic action. Contributors to this volume are leading Asian researchers in Photocatalysis. It will appeal to researchers wishing to know how to design new types of photocatalysts with controlled nanostructures.
Download or read book Two Dimensional 2D Nanomaterials in Separation Science written by Rasel Das and published by Springer Nature. This book was released on 2021-04-26 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers newly emerging two-dimensional nanomaterials which have been recently used for the purpose of water purification. It focuses on the synthesis methods of 2D materials and answers how scientists/engineers/nanotechnologist/environmentalists could use these materials for fabricating new separation membranes and most probably making commercially feasible technology. The chapters are written by a collection of international experts ensuring a broad view of each topic. The book will be of interest to experienced researchers as well as young scientists looking for an introduction into 2D materials-based cross-disciplinary research.
Download or read book Graphene based Energy Devices written by A. Rashid bin Mohd Yusoff and published by John Wiley & Sons. This book was released on 2015-02-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book dedicated to the topic provides an up-to-date account of the many opportunities graphene offers for robust, workable energy generation and storage devices. Following a brief overview of the fundamentals of graphene, including the main synthesis techniques, characterization methods and properties, the first part goes on to deal with graphene for energy storage applications, such as lithium-ion batteries, supercapacitors and hydrogen storage. The second part is concerned with graphene-based energy-generation devices, in particular conventional as well as microbial and enzymatic fuel cells, with chapters on graphene photovoltaics rounding off the book. Throughout, device architectures are not only discussed on a laboratory scale, but also ways for upscaling to an industrial level, including manufacturing processes and quality control. By bridging academic research and industrial development this is invaluable reading for materials scientists, physical chemists, electrochemists, solid state physicists, and those working in the electrotechnical industry.
Download or read book Design Fabrication and Characterization of Multifunctional Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2021-11-24 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Fabrication, and Characterization of Multifunctional Nanomaterials covers major techniques for the design, synthesis, and development of multifunctional nanomaterials. The chapters highlight the main characterization techniques, including X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, and scanning probe microscopy.The book explores major synthesis methods and functional studies, including: - Brillouin spectroscopy; - Temperature-dependent Raman spectroscopic studies; - Magnetic, ferroelectric, and magneto-electric coupling analysis; - Organ-on-a-chip methods for testing nanomaterials; - Magnetron sputtering techniques; - Pulsed laser deposition techniques; - Positron annihilation spectroscopy to prove defects in nanomaterials; - Electroanalytic techniques. This is an important reference source for materials science students, scientists, and engineers who are looking to increase their understanding of design and fabrication techniques for a range of multifunctional nanomaterials. - Explains the major design and fabrication techniques and processes for a range of multifunctional nanomaterials; - Demonstrates the design and development of magnetic, ferroelectric, multiferroic, and carbon nanomaterials for electronic applications, energy generation, and storage; - Green synthesis techniques and the development of nanofibers and thin films are also emphasized.
Download or read book The Nanotechnology Revolution written by Dale A. Stirling and published by CRC Press. This book was released on 2018-01-17 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is changing the world in a very big way, but at the atomic and sub-atomic level. Although the roots of nanotechnology can be traced back to more than a century ago, the last three decades have witnessed an explosion of nano-based technologies and products. This reference work examines the history, current status, and future directions of nanotechnology through an exhaustive search of the technical and scientific literature. The more than 4000 bibliographic citations it includes are carefully organized into core subject areas, and a geographic and subject index allows readers to quickly locate documents of interest. Although a sense of the global reach and interest in nanotechnology can be gleaned from the reference sections of countless journal articles, conference papers, and books, this is the only reference work providing an in-depth global perspective that is ready-made for nanotechnology professionals and those interested in learning more about all things nanotechnology. Despite the abundance of online resources, there is still an urgent need for well-researched, well-presented, concise, and thematically organized reference works. Instead of relying on wiki pages, citation aggregators, and related websites, the author searched the databases and databanks of scholarly literature search providers such as EBSCO, ProQuest, PUBMED, STN International, and Thomson Reuters. In addition, he used select serials-related databases to account for pertinent documents from countries in which English is not the primary national language (i.e., China Online Journals, e-periodica, J-STAGE, and SciELO Brazil among others).
