Download or read book Biomedical Applications of Polymeric Materials and Composites written by Raju Francis and published by John Wiley & Sons. This book was released on 2016-12-19 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its content taken from only the very latest results, this is an extensive summary of the various polymeric materials used for biomedical applications. Following an introduction listing various functional polymers, including conductive, biocompatible and conjugated polymers, the book goes on to discuss different synthetic polymers that can be used, for example, as hydrogels, biochemical sensors, functional surfaces, and natural degradable materials. Throughout, the focus is on applications, with worked examples for training purposes as well as case studies included. The whole is rounded off with a look at future trends.

Download or read book Intelligent Stimuli Responsive Materials written by Quan Li and published by John Wiley & Sons. This book was released on 2013-09-03 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been concerted effort across scientific disciplines to develop artificial materials and systems that can help researchers understand natural stimuli-responsive activities. With its up-to-date coverage on intelligent stimuli-responsive materials, Intelligent Stimuli-Responsive Materials provides research, industry, and academia professionals with the fundamentals and principles of intelligent stimuli-responsive materials, with a focus on methods and applications. Emphasizing nanostructures and applications for a broad range of fields, each chapter comprehensively covers a different stimuli-responsive material and discusses its developments, advances, challenges, analytical techniques, and applications.

Download or read book Polymer and Biopolymer Brushes written by Omar Azzaroni and published by John Wiley & Sons. This book was released on 2018-01-11 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serves as a guide for seasoned researchers and students alike, who wish to learn about the cross-fertilization between biology and materials that is driving this emerging area of science This book covers the most relevant topics in basic research and those having potential technological applications for the field of biopolymer brushes. This area has experienced remarkable increase in development of practical applications in nanotechnology and biotechnology over the past decade. In view of the rapidly growing activity and interest in the field, this book covers the introductory features of polymer brushes and presents a unifying and stimulating overview of the theoretical aspects and emerging applications. It immerses readers in the historical perspective and the frontiers of research where our knowledge is increasing steadily—providing them with a feeling of the enormous potential, the multiple applications, and the many up-and-coming trends behind the development of macromolecular interfaces based on the use of polymer brushes. Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials offers chapters on: Functionalization of Surfaces Using Polymer Brushes; Polymer Brushes by ATRP and Surface-Mediated RAFT Polymerization for Biological Functions; Electro-Induced Copper Catalyzed Surface Modification with Monolayer and Polymer Brush; Polymer Brushes on Flat and Curved Substrates; Biomimetic Anchors for Antifouling Polymer Brush Coating; Glycopolymer Brushes Presenting Sugars in Their Natural Form; Smart Surfaces Modified with Phenylboronic Acid-Containing Polymer Brushes; DNA Brushes; Polymer Brushes as Interfacial Materials for Soft Metal Conductors and Electronics; and more. Presents a comprehensive theory/simulation section that will be valuable for all readers Includes chapters not only on the biological applications of polymer brushes but also on biological systems that resemble polymer brushes on flat surfaces Addresses applications in coatings, friction, sensors, microelectromechanical systems, and biomaterials Devotes particular attention to the functional aspects of hybrid nanomaterials employing polymer brushes as functional units Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials is aimed at both graduate students and researchers new to this subject as well as scientists already engaged in the study and development of polymer brushes.

Download or read book Handbook of Stimuli Responsive Materials written by Marek W. Urban and published by John Wiley & Sons. This book was released on 2011-02-25 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a broad approach, this volume provides the scientific community with a much-needed overview of developments and scientific findings in stimuli-responsive materials. Its primary focus is on the designing, synthesizing, formulating, and processing of materials that lead to an understanding of the scientific principles governing response driven functions leading to future technologies. The highly experienced and internationally renowned editor has assembled a team of leading scientists from the interdisciplinary areas of: * polymers * biopolymers * biochemistry * biophysics * biomaterials * bioengineering * materials engineering * biotechnology * chemistry * physics * ceramics * metals * and materials science. A combination that guarantees a unique and high-quality handbook.

Download or read book Nanopharmaceutical Advanced Delivery Systems written by Vivek Dave and published by John Wiley & Sons. This book was released on 2020-12-29 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a single volume covering detailed descriptions about various delivery systems, their principles and how these are put in use for the treatment of multiple diseases. It is divided into four sections where the first section deals with the introduction and importance of novel drug delivery system. The second section deals with the most advanced drug delivery systems like microbubbles, dendrimers, lipid-based nanoparticles, nanofibers, microemulsions etc., describing the major principles and techniques of the preparations of the drug delivery systems. The third section elaborates on the treatments of diverse diseases like cancer, topical diseases, tuberculosis etc. The fourth and final section provides a brief informative description about the regulatory aspects of novel drug delivery system that is followed in various countries.

Download or read book Stimuli Responsive Materials written by Marek W Urban and published by Royal Society of Chemistry. This book was released on 2019-03-15 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability for a material to change properties in response to external stimuli is an attractive feature for numerous applications and as such stimuli responsive materials are gaining attention across many different fields. This book introduces the concepts of stimuli-responsiveness, including the fundamental materials properties required for design. It provides readers with comprehensive scientific principles and developments of stimuli responsive materials, as well as the recent technological advances. Written by a renowned expert in the field, this book is suitable for anyone interested in stimuli responsive materials working in polymers, biochemistry, biotechnology and materials science.

Download or read book Functional Polymer Films 2 Volume Set written by Wolfgang Knoll and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very thin film materials have emerged as a highly interesting and useful quasi 2D-state functionality. They have given rise to numerous applications ranging from protective and smart coatings to electronics, sensors and display technology as well as serving biological, analytical and medical purposes. The tailoring of polymer film properties and functions has become a major research field. As opposed to the traditional treatise on polymer and resin-based coatings, this one-stop reference is the first to give readers a comprehensive view of the latest macromolecular and supramolecular film-based nanotechnology. Bringing together all the important facets and state-of-the-art research, the two well-structured volumes cover film assembly and depostion, functionality and patterning, and analysis and characterization. The result is an in-depth understanding of the phenomena, ordering, scale effects, fabrication, and analysis of polymer ultrathin films. This book will be a valuable addition for Materials Scientists, Polymer Chemists, Surface Scientists, Bioengineers, Coatings Specialists, Chemical Engineers, and Scientists working in this important research field and industry.

Download or read book Polymer Brushes written by Rigoberto C. Advincula and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists, polymer chemists, surface physicists and materials engineers will find this book a complete and detailed treatise on the field of polymer brushes, their synthesis, characterization and manifold applications. In a first section, the various synthetic pathways and different surface materials are introduced and explained, followed by a second section covering important aspects of characterization and analysis in both flat surfaces and particles. These specific surface initiated polymerization (SIP) systems such as linear polymers, homopolymers, block copolymers, and hyperbranched polymers are unique compared to previously reported systems by chemisorption or physisorption. They have found their way in both large-scale and miniature applications of polymer brushes, which is covered in the last section. Such 'hairy' surfaces offer fascinating opportunities for addressing numerous problems of both academic and, in particular, industrial interest: high-quality, functional or protective coatings, composite materials, surface engineered particles, metal-organic interfaces, biological applications, micro-patterning, colloids, nanoparticles, functional devices, and many more. It is the desire of the authors that this book will be of benefit to readers who want to "brush-up on polymers".

Download or read book Smart Polymers and Their Applications written by Maria Rosa Aguilar and published by Woodhead Publishing. This book was released on 2019-02-15 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Polymers and Their Applications, Second Edition presents an up-to-date resource of information on the synthesis and properties of different types of smart polymers, including temperature, pH, electro, magnetic and photo-responsive polymers, amongst others. It is an ideal introduction to this field, as well as a review of the latest research in this area. Shape memory polymers, smart polymer hydrogels, and self-healing polymer systems are also explored. In addition, a very strong focus on applications of smart polymers is included for tissue engineering, smart polymer nanocarriers for drug delivery, and the use of smart polymers in medical devices. Additionally, the book covers the use of smart polymers for textile applications, packaging, energy storage, optical data storage, environmental protection, and more. This book is an ideal, technical resource for chemists, chemical engineers, materials scientists, mechanical engineers and other professionals in a range of industries. - Includes a significant number of new chapters on smart polymer materials development, as well as new applications development in energy storage, sensors and devices, and environmental protection - Provides a multidisciplinary approach to the development of responsive polymers, approaching the subject by the different types of polymer (e.g. temperature-responsive) and its range of applications

Download or read book Stimuli Responsive Dewetting Wetting Smart Surfaces and Interfaces written by Atsushi Hozumi and published by Springer. This book was released on 2018-11-16 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superhydrophobic surfaces, artificially mimicking lotus leaves, have captured the attention of scientists and engineers over the past few decades. Recent trends have shifted from superhydrophobicity to superominipohobicity, or superamphiphobicity. In addition, dynamic rather than static surface wetting/dewetting properties, which can be triggered by various stimuli, including temperature, pH, magnetic/electric fields, solvents, light exposure etc, have been highly sought after for commercial applications. This book will focus on recent topics related to various stimuli-responsive wetting/dewetting surfaces, and give an overview of the knowledge and concepts of how to design and establish these smart artificial surfaces, which can be used for technical developments in a wide variety research fields.

Download or read book Polymer and Biopolymer Brushes written by Omar Azzaroni and published by John Wiley & Sons. This book was released on 2017-11-20 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serves as a guide for seasoned researchers and students alike, who wish to learn about the cross-fertilization between biology and materials that is driving this emerging area of science This book covers the most relevant topics in basic research and those having potential technological applications for the field of biopolymer brushes. This area has experienced remarkable increase in development of practical applications in nanotechnology and biotechnology over the past decade. In view of the rapidly growing activity and interest in the field, this book covers the introductory features of polymer brushes and presents a unifying and stimulating overview of the theoretical aspects and emerging applications. It immerses readers in the historical perspective and the frontiers of research where our knowledge is increasing steadily—providing them with a feeling of the enormous potential, the multiple applications, and the many up-and-coming trends behind the development of macromolecular interfaces based on the use of polymer brushes. Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials offers chapters on: Functionalization of Surfaces Using Polymer Brushes; Polymer Brushes by ATRP and Surface-Mediated RAFT Polymerization for Biological Functions; Electro-Induced Copper Catalyzed Surface Modification with Monolayer and Polymer Brush; Polymer Brushes on Flat and Curved Substrates; Biomimetic Anchors for Antifouling Polymer Brush Coating; Glycopolymer Brushes Presenting Sugars in Their Natural Form; Smart Surfaces Modified with Phenylboronic Acid-Containing Polymer Brushes; DNA Brushes; Polymer Brushes as Interfacial Materials for Soft Metal Conductors and Electronics; and more. Presents a comprehensive theory/simulation section that will be valuable for all readers Includes chapters not only on the biological applications of polymer brushes but also on biological systems that resemble polymer brushes on flat surfaces Addresses applications in coatings, friction, sensors, microelectromechanical systems, and biomaterials Devotes particular attention to the functional aspects of hybrid nanomaterials employing polymer brushes as functional units Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials is aimed at both graduate students and researchers new to this subject as well as scientists already engaged in the study and development of polymer brushes.

Download or read book Polymer Functionalized Graphene written by Arun Kumar Nandi and published by Royal Society of Chemistry. This book was released on 2021-06-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an immense variety of research on polymer functionalized graphene (PFG). Functionalization of graphene is necessary for improvement of the compatibility with polymers. Applications of these graphene polymer hybrids include in chemical and biological sensing, photovoltaic devices, supercapacitors and batteries, dielectric materials and drug/gene delivery vehicles. This book will shed light on the synthesis, properties and applications of these new materials, covering two methods (covalent and noncovalent) for producing polymer functionalized graphene. Chapters cover physical, optical, mechanical and electronic properties, applications of polymer functionalized graphene in energy harvesting and storage, and uses in biomedicine and bioengineering. Written by an expert in the field, Polymer Functionalized Graphene will be of interest to graduate students and researchers in polymer chemistry and nanoscience.

Download or read book Molecular Recognition and Polymers written by Vincent Rotello and published by John Wiley & Sons. This book was released on 2008-09-15 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art techniques for tapping the vast potential of polymers The use of specific non-covalent interactions to control polymer structure and properties is a rapidly emerging field with applications in diverse disciplines. Molecular Recognition and Polymers covers the fundamental aspects and applications of molecular recognition—in the creation of novel polymeric materials for use in drug delivery, sensors, tissue engineering, molecular imprinting, and other areas. This reference begins by explaining the fundamentals of supramolecular polymers; it progresses to cover polymer formation and self-assembly with a wide variety of examples, and then includes discussions of biomolecular recognition using polymers. With chapters contributed by the foremost experts in their fields, this resource: Provides an integrated resource for supramolecular chemistry, polymer science, and interfacial science Covers advanced, state-of-the-art techniques used in the design and characterization of non-covalent interactions in polymers Illustrates how to tailor the properties of polymeric materials for various applications Stand-alone chapters address specific applications independently for easy reference. This is a premier resource for graduate students and researchers in polymer chemistry, supramolecular chemistry, materials science, and physical organic chemistry.

Download or read book Chemical Design of Responsive Microgels written by Andrij Pich and published by Springer Science & Business Media. This book was released on 2010-10-08 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgels by Precipitation Polymerization: Synthesis, Characterization, and Functionalization, by A. Pich and W. Richtering * Hydrogels in Miniemulsions, by K. Landfester and A. Musyanovych * Nano- and Microgels Through Addition Reactions of Functional Oligomers and Polymers, by K. Albrecht, M. Moeller, and J. Groll * Synthesis of Microgels by Radiation Methods, by F. Krahl and K.-F. Arndt * Microgels as Nanoreactors: Applications in Catalysis, by N. Welsch, M.s Ballauff, and Y. Lu

Download or read book Polymer Brushes written by Vikas Mittal and published by CRC Press. This book was released on 2012-03-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Brushes: Substrates, Technologies, and Properties covers various aspects of polymer brush technology, including synthesis, properties, performance, and applications. It presents both experimental details and theoretical insights to enable a better understanding of the brush system. After an overview of polymer brush systems, the book discusses methods for grafting organic brushes from the surface of clay platelets and for the covalent grafting of PNIPAm brushes. It then describes ferrocene polymer brushes, nonfouling brushes on poly(ethylene terephthalate) film surfaces, brushes formed on the inner surface of cylindrical pores, and the "zipper brush" approach. The authors examine the use of scanning electrochemical microscopy for analyzing brushes and compare surface-controlled atom transfer radical polymerization and surface-controlled single-electron transfer living radical polymerization. They also explore the application of polymer brushes in the chromatographic separations of viruses and proteins and the suppression of proteins and cell adhesions. The text concludes with a look at how polymer brushes are synthesized by surface-initiated iniferter-mediated polymerization. This book provides a one-stop reference on the various substrates and technologies used to synthesize polymer brushes. The hands-on information in the text will help readers choose the proper synthesis methods and materials for their system.

Download or read book Chemoresponsive Materials written by Hans-Jörg Schneider and published by Royal Society of Chemistry. This book was released on 2022-07-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart materials stimulated by chemical or by logical signals hold promise for many applications, including new sensors and actuators for medicine, environmental and process control. In contrast to other books on responsive materials which are restricted to sensing, this volume not only highlights fundamental chemical and physical principles but also focuses on the use of smart materials for applications such as drug delivery, wound healing, cell adhesion, tuneable vesicles, surface control, smart paints and glasses, separations, oil recovery and artificial muscles. In this completely updated and expanded edition, readers are introduced to the area with chapters reflecting the enormous expansion of the field in recent years. Different responsive material systems will be covered including hydrogels, membranes, thin layers, polymer brushes, chemomechanical and imprinted polymers, nanomaterials and silica particles. With contributions from internationally recognised experts, the book will appeal to graduate students and researchers in academia, healthcare and industry interested in functional materials and their applications.

Download or read book Encyclopedia of Polymer Applications 3 Volume Set written by Munmaya Mishra and published by CRC Press. This book was released on 2018-12-17 with total page 2954 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtedly the applications of polymers are rapidly evolving. Technology is continually changing and quickly advancing as polymers are needed to solve a variety of day-to-day challenges leading to improvements in quality of life. The Encyclopedia of Polymer Applications presents state-of-the-art research and development on the applications of polymers. This groundbreaking work provides important overviews to help stimulate further advancements in all areas of polymers. This comprehensive multi-volume reference includes articles contributed from a diverse and global team of renowned researchers. It offers a broad-based perspective on a multitude of topics in a variety of applications, as well as detailed research information, figures, tables, illustrations, and references. The encyclopedia provides introductions, classifications, properties, selection, types, technologies, shelf-life, recycling, testing and applications for each of the entries where applicable. It features critical content for both novices and experts including, engineers, scientists (polymer scientists, materials scientists, biomedical engineers, macromolecular chemists), researchers, and students, as well as interested readers in academia, industry, and research institutions.