Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: - Catalytic pyrolysis of lignocellulosic biomass - Hybrid biogasoline by co-processing in FCC units - Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) - Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. - Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes - Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process - Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature

Download or read book Nanotechnology in Catalysis 3 written by Bing Zhou and published by Springer Science & Business Media. This book was released on 2004 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on the first and second symposia on Nanotechnology in Catalysis which were held in spring 2001 at the ACS 221st National Meeting in San Diego, CA, and in fall 2002 at the ACS 224th National Meeting in Boston, MA."--Pref.

Download or read book Hydrometallurgy written by Suresh Bhargava and published by MDPI. This book was released on 2018-07-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Hydrometallurgy" that was published in Metals

Download or read book Modern Drying Technology 5 Volume Set written by Evangelos Tsotsas and published by Wiley-VCH. This book was released on 2014-04-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: These five-volume series provide a comprehensive overview of all important aspects of drying technology like computational tools at different scales (Volume 1), modern experimental and analytical techniques (Volume 2), product quality and formulation (Volume 3), energy savings (Volume 4) and process intensification (Volume 5) Based on high-level cutting-edge results contributed by internationally recognized experts in the various treated fields, this book series will help engineers achieve greater efficiency for an unavoidable, yet vital process Located at the intersection of the two main approaches in modern chemical engineering, product engineering and process systems engineering, the series brings theory into practice in order to improve the quality of high-value dried products, save energy, and cut the costs of drying processes Available in print as 5 Volume Set or as individual volumes. Buy the Set and SAVE 30%! Also available online. For further information, visit wileyonlinelibrary.com Individual volumes: Volume 1 - Modern Drying Technology, Computational Tools at Different Scales Diverse model types for the drying of products and the design of drying processes (short-cut methods, homogenized, pore network, and continuous thermo-mechanical approaches) are treated, along with computational fluid dynamics, population balances, and process systems simulation tools. Emphasis is put on scale transitions. Volume 2 - Modern Drying Technology: Experimental Techniques Comprises experimental methods used in various industries and in research in order to design and control drying processes, measure moisture and moisture distributions, characterize particulate material and the internal micro-structure of dried products, and investigate the behavior of particle systems in drying equipment. Key topics include acoustic levitation, near-infrared spectral imaging, magnetic resonance imaging, X-ray tomography, and positron emission tracking. Volume 3 - Modern Drying Technology: Product Quality and Formulation Discusses how desired properties of foods, biomaterials, active pharmaceutical ingredients, and fragile aerogels can be preserved during drying, and how spray drying and spray fluidized bed processes can be used for particle formation and formulation. Methods for monitoring product quality, such as process analytical technology, and modeling tools, such as Monte Carlo simulations, discrete particle modeling and neural networks, are presented with real examples from industry and academia. Volume 4 - Modern Drying Technology: Energy Savings Deals with the reduction of energy demand in various drying processes and areas, highlighting the following topics: Energy analysis of dryers, efficient solid-liquid separation techniques, osmotic dehydration, heat pump assisted drying, zeolite usage, solar drying, drying and heat treatment for solid wood and other biomass sources, and sludge thermal processing. Volume 5 - Process Intensification Dedicated to process intensification by more efficient distribution and flow of the drying medium, foaming, controlled freezing, and the application of superheated steam, infrared radiation, microwaves, power ultrasound and pulsed electric fields. Process efficiency is treated in conjunction with the quality of sensitive products, such as foods, for a variety of hybrid and combined drying processes.

Download or read book New and Future Developments in Catalysis written by Steven L Suib and published by Newnes. This book was released on 2013-07-19 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and Future Developments in Catalysis is a package of seven books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes.The use of solar energy during various catalytic chemical processes for the production of an array of chemical products is the theme of this volume. Photocatalysis is a topic of increasing importance due to its essential role in many of today's environmental and energy source problems. The use of solar energy for catalytic reactions results in a carbon dioxide–neutral process. All photocatalytic processes and the future developments in this area are discussed, including an economic analysis of the various processes. - Offers in-depth coverage of all catalytic topics of current interest and outlines future challenges and research areas - A clear and visual description of all parameters and conditions, enabling the reader to draw conclusions for a particular case - Outlines the catalytic processes applicable to energy generation and design of green processes

Download or read book Solid Acid Catalysis written by Hideshi Hattori and published by CRC Press. This book was released on 2015-04-01 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solids that possess acidic properties on their surfaces function as catalysts just like liquid acids, such as sulfuric acid and hydrochloric acid. By using solid acid catalysts, chemical processes become more productive and more environmentally friendly. In fact, solid acids are being used in many industrial chemical processes from the largest chem

Download or read book Synthesis of Solid Catalysts written by Krijn P. de Jong and published by John Wiley & Sons. This book was released on 2009-06-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book combines recent progress with a discussion of the general aspects of catalyst preparation. The first part deals with the basic principles of solid catalyst preparation, explaining the main aspects of sol-gel chemistry and interfacial chemistry, followed by such techniques as co-precipitation and immobilization. New tools for catalyst preparation research, including microspectroscopy and high-throughput experimentation, are also taken into account. The second part heightens the practical relevance by providing six case studies on such topics as the preparation of zeolites, hydrotreating catalysts, methanol catalysts and gold catalysts

Download or read book EU Climate Policy Explained written by Jos Delbeke and published by Routledge. This book was released on 2015-10-05 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EU has been the region of the world where the most climate policies have been implemented, and where practical policy experimentation in the field of the environment and climate change has been taking place at a rapid pace over the last twenty-five years. This has led to considerable success in reducing pollution, decoupling emissions from economic growth and fostering global technological leadership. The objective of the book is to explain the EU's climate policies in an accessible way, to demonstrate the step-by-step approach that has been used to develop these policies, and the ways in which they have been tested and further improved in the light of experience. The book shows that there is no single policy instrument that can bring down greenhouse gas emissions, but the challenge has been to put a jigsaw of policy instruments together that is coherent, delivers emissions reductions, and is cost-effective. The book differs from existing books by the fact it covers the EU's emissions trading system, the energy sector and other economic sectors, including their development in the context of international climate policy. Set against the backdrop of the 2015 UN Climate Change conference in Paris, this accessible book will be of great relevance to students, scholars and policy makers alike.

Download or read book Glass ceramic Materials written by Tiziano Manfredini and published by . This book was released on 1997 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanophotocatalysis and Environmental Applications written by Inamuddin and published by Springer. This book was released on 2019-06-07 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be a guiding path to understand the photocatalytic process and mechanism for the deterioration of heavy metals, persistent organic pollutants and pathogens from wastewater. Environmental remediation is of crucial importance in the context of human sustainability in the present and future times. The unplanned anthropogenic activities and revolutionary industrialization end up in environmental contamination with noxious organic-inorganic and biogenic pollutants. The photocatalytic disinfection and detoxification is the only solution to preserve and restore the ecological balance. The main emphasis is to explore and enhance the photocatalytic potentials of solar active-materials.

Download or read book Selective Oxidation Processes written by American Chemical Society. Division of Petroleum Chemistry and published by . This book was released on 1965 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Materials for Catalytic Applications written by Vasile I. Parvulescu and published by Elsevier. This book was released on 2016-01-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials for Catalytic Applications proposes the use of both new and existing materials for catalytic applications, such as zeolites, metal oxides, microporous and mesoporous materials, and monocrystals. In addition, metal-oxides are discussed from a new perspective, i.e. nano- and photocatalytic applications. The material presents these concepts with a new focus on strategies in synthesis, synthesis based on a rational design, the correlation between basic properties/potential applications, and new catalytic solutions for acid-base, redox, hydrogenation, photocatalytic reactions, etc. - Presents organometallic concepts for the synthesis of nanocatalysts - Provides a synthesis of new materials following the fluorolytic sol-gel concept - Covers electronic and photocatalytic properties via synthesis of nano-oxide materials - Details the nature of sites in MOFs generating catalytic properties immobilization of triflates in solid matrices for organic reactions

Download or read book Biomass Utilization written by Wilfred Cote and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume represents the culmination of nearly three years of planning, organizing and carrying out of a NATO Ad vanced Study Institute on Biomass Utilization. The effort was initi ated by Dr. Harry Sobel, then Editor of Biosources Digest, and a steering committee representing the many disciplines that this field brings together. . When the fiscal and logistical details of the original plan could not be worked out, the idea was temporarily suspended. In the spring of 1982, the Renewable Materials Institute of the State University of New York at the College of Environmental Science and Forestry in Syracuse, New York revived the plan. A number of modifications had to be made, including the venue which was changed from the U.S.A. to Portugal. Additional funding beyond the basic support provided by the Scientific Affairs Division of NATO had to be obtained. Ul timately there were supplementary grants from the Foundation for Microbiology and the Anne S. Richardson Fund to assist student participants. The New York State College of Forestry Foundation, Inc. provided major support through the Renewable Ma terials Institute. The ASI was held in Alcabideche, Portugal from September 26 to October 9, 1982. Eighty participants including fifteen principal lecturers were assembled at the Hotel Sintra Estoril for the program that was organized as a comprehensive course on biomass utilization. The main lectures were supplemented by relevant short papers offered by the participants.

Download or read book Environmental Catalysis written by John N. Armor and published by American Chemical Society. This book was released on 1994 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive volume on the major aspects of environmental catalysis. Focuses on NO x removal, mobile engine emission controls, power plant emissions, control of volatile organic compounds, SO x emissions, and waste minimization. Overview chapters introduce each section and provide added perspective and coverage. Includes comprehensive technical reports on automotive and diesel emission control catalysis, NO x removal, and removal of chlorinated hydrocarbons from various process streams.

Download or read book Catalysis by Precious Metals Past and Future written by Marcela Martinez Tejada and published by MDPI. This book was released on 2020-04-15 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future of the precious metals is shiny and resistant. Although expensive and potentially replaceable by transition metal catalysts, precious metal implementation in research and industry shows potential. These metals catalyze oxidation and hydrogenation due to their dissociative behavior toward hydrogen and oxygen, dehydrogenation, isomerization, and aromatization, etc. The precious metal catalysts, especially platinum-based catalysts, are involved in a variety of industrial processes. Examples include Pt–Rh gauze for nitric acid production, the Pt/Al2O3 catalyst for cyclohexane and propylene production, and Pd/Al2O3 catalysts for petrochemical hydropurification reactions, etc. A quick search of the number of published articles in the last five years containing a combination of corresponding “metals” (Pt, Pd, Ru, Rh and Au) and “catalysts” as keywords indicates the importance of the Pt catalysts, but also the continuous increase in the contribution of Pd and Au. This Special Issue reveals the importance of precious metals in catalysis and focuses on mono- and bi-metallic formulations of any supported precious metals and their promotional catalytic effect of other transition metals. The application of precious metals in diverse reactions, either homogeneous or heterogeneous, and studies of the preparation, characterization, and applications of the supported precious metal catalysts, are presented.

Download or read book Gold Catalysis written by Laura Prati and published by CRC Press. This book was released on 2016-01-05 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first report on alcohol oxidation in 1998, many studies have highlighted some peculiarity of gold with respect to other metals. Some analogies have been found between gas and liquid phases, but the big challenge to operate in a condensed phase lies in the role of the solvent in tuning the reactant-catalyst contact. Liquid-phase oxidation

Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.