Download or read book Synthesis and Characterization of Polythiophene Derivatives written by Xin Chen and published by ProQuest. This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In Chapter 1, the history of conducting polymers, especially polythiophene and its derivatives, was briefly reviewed. Different approaches of structural modifications to afford small bandgap polythiophene derivatives were discussed. The emergence of metal-containing polymers (metallopolymers) as functional materials has attracted tremendous attention around the world. Introduction of metals into thiophene-based oligomers and polymers, whether the backbone or the side chain of the pi-conjugated framework, the electronic, optical, or magnetic properties of the material are expected to be significantly affected by metals through various mechanisms. Synthesis methods to prepare poly(thienylene vinylene) were also briefly reviewed in this chapter. In Chapter 2, the motivations and objectives were briefly discussed. Two structurally similar compounds, thieno[3,4-d]-1,3-dithiole-2-thione and thieno[3,4-d]-1,3-dithiol-2-one are the starting point of this project due to their unique carbondithiolate structures, which may lead to metal-dithiolate coordinated oligomers or/and polymers, or polymers crosslinked by DTTTF units. For the preparation of monomers, six types of reactions were systematically studied with focus on thieno[3,4-d]-1,3-dithiol-2-one to prepare different direvatives. Different halogenated compounds, Mannich bases, chloromethylated compounds, a number of nucleophilic substituted derivatives and a DTTTF analogue from chloromethylated compounds were successful synthesized. All products were fully characterized through 1H and 13C-NMR, FT-IR, ESI-TOF high resolution mass spectroscopy. The halogenated products were prepared through halogensuccinimides or other halogenation reagents such as Br2, I2. These halogenated compounds may be candidates to prepare homopolymer and/or copolymers bearing carbondithiolate structures by cross-coupling reactions. 4,6-Bis(chloromethyl) thieno[3,4- d]-1,3-dithiol-2-one and its nucleophilic derivatives may be good monomers for the two-step precursor polymerization to achieve fully conjugated poly(thienylene vinylene) derivatives and even metallopolymers with metal-dithiolate coordinations. Attempted polymerization reactions to homopolymers and copolymers through directly C-C coupling, such as transitional metal catalyzed cross-coupling, Stille reaction, and Ullman reaction, et al. were discussed in the beginning of Chapter 3. Base-promoted and acid-promoted polymerizations were attempted to afford soluble precursor polymers with carbondithiolate structures. However, all the symmetrical thiophene derivatives did not successfully yield processable precursor polymers; asymmetrical monomers generated some possibilities for future study. Synthesis of thiophene-based oligomers, such as dimmers (dithienyl compounds), trimers (trithienyl compounds), and heptamers were also explored in chapter 3, followed by preparation of thiophene-based copolymers through Wittig-Horner reactions. Properties of oligomers, especially trimers were well characterized by NMR, FT-IR, and ESI-TOF. Several conjugated DTTTF derivatives from trimers were prepared by the triethyl phosphite cross-coupling method. These conjugated DTTTF compounds posses some unique properties. They are stable in solid forms, but may be doped in solution forms. The copolymers were characterized by elemental analysis, and FT-IR. UV-Vis spectra of copolymers show their bandgap values are aroud 1.87eV (UV edge calculation). In the Experimental chapter, all reaction conditions of preparation of new annulated thiophene derivatives and oligomers were documented in details. Physical and spectroscopic properties of these new compounds were also presented in this chapter. Key words. polythiophene, oligomer, conjugation, synthesis, characterization, DTTTF, metallopolymer.

Download or read book Handbook of Thiophene Based Materials written by Igor F. Perepichka and published by John Wiley & Sons. This book was released on 2009-07-17 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential resource consists of a series of critical reviews written by leading scientists, summarising the progress in the field of conjugated thiophene materials. It is an application-oriented book, giving a chemists’ point of view on the state-of-art and perspectives of the field. While presenting a comprehensive coverage of thiophene-based materials and related applications, the aim is to show how the rational molecular design of materials can bring a new breadth to known device applications or even aid the development of novel application concepts. The main topics covered include synthetic methodologies to thiophene-based materials (including the chemistry of thiophene, preparation of oligomers and polymerisation approaches) and the structure and physical properties of oligo- and polythiophenes (discussion of structural effects on electronic and optical properties). Part of the book is devoted to the optical and semiconducting properties of conjugated thiophene materials for electronics and photonics, and the role of thiophene-based materials in nanotechnology.

Download or read book Conjugated Polymers written by Terje A. Skotheim and published by CRC Press. This book was released on 2006-12-26 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many significant fundamental concepts and practical applications have developed since the publication of the best-selling second edition of the Handbook of Conducting Polymers. Now divided into two books, the third edition continues to retain the excellent expertise of the editors and world-renowned contributors while providing superior coverage of

Download or read book Sulfur Containing Polymers written by Xing-Hong Zhang and published by John Wiley & Sons. This book was released on 2021-03-23 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-have resource to the booming field of sulfur-containing polymers Sulfur-Containing Polymers is a state-of-the-art text that offers a synthesis of the various sulfur-containing polymers from low-cost sulfur resources such as elemental sulfur, carbon disulfide (CS2), carbonyl sulfide (COS) and mercaptan. With contributions from noted experts on the topic, the book presents an in-depth understanding of the mechanisms related to the synthesis of sulfur-containing polymers. The book also includes a review of the various types of sulfur-containing polymers, such as: poly(thioester)s, poly(thioether)s and poly(thiocarbonate)s and poly(thiourethane)s with linear or hyperbranched (dendrimer) architectures. The expert authors provide the fundamentals on the structure-property relationship and applications of sulfur-containing polymers. Designed to be beneficial for both research and application-oriented chemists and engineers, the book contains the most recent research and developments of sulfur-containing polymers. This important book: Offers the first comprehensive handbook on the topic Contains state-of-the-art research on synthesis of sulfur containing polymers from low-cost sulfur-containing compounds Examines the synthesis, mechanism, structure properties, and applications of various types of sulful-containing polymers Includes contributions from well-known experts Written for polymer chemists, materials scientists, chemists in industry, biochemists, and chemical engineers, Sulfur-Containing Polymers offers a groundbreaking text to the field with inforamtion on the most recent research.

Download or read book Organic Light Emitting Materials and Devices written by Zhigang Rick Li and published by CRC Press. This book was released on 2017-12-19 with total page 1063 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Light-Emitting Materials and Devices provides a single source of information covering all aspects of OLEDs, including the systematic investigation of organic light-emitting materials, device physics and engineering, and manufacturing and performance measurement techniques. This Second Edition is a compilation of the advances made in recent years and of the challenges facing the future development of OLED technology. Featuring chapters authored by internationally recognized academic and industrial experts, this authoritative text: Introduces the history, fundamental physics, and potential applications of OLEDs Reviews the synthesis, properties, and device performance of electroluminescent materials used in OLEDs Reflects the current state of molecular design, exemplifying more than 600 light-emitting polymers and highlighting the most efficient materials and devices Explores small molecules-based OLEDs, detailing hole- and electron-injection and electron-transport materials, electron- and hole-blocking materials, sensitizers, and fluorescent and phosphorescent light-emitting materials Describes solution-processable phosphorescent polymer LEDs, energy transfer processes, polarized OLEDs, anode materials, and vapor deposition manufacturing techniques employed in OLED fabrication Discusses flexible display, the backplane circuit technology for organic light-emitting displays, and the latest microstructural characterization and performance measurement techniques Contains abundant diagrams, device configurations, and molecular structures clearly illutrating the presented ideas Organic Light-Emitting Materials and Devices, Second Edition offers a comprehensive overview of the OLED field and can serve as a primary reference for those needing additional information in any particular subarea of organic electroluminescence. This book should attract the attention of materials scientists, synthetic chemists, solid-state physicists, and electronic device engineers, as well as industrial managers and patent lawyers engaged in OLED-related business areas.

Download or read book Organic Light Emitting Materials and Devices written by Zhigang Li and published by CRC Press. This book was released on 2006-09-12 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: New advances offer flexible, low-cost fabrication methods for light-emitting materials, particularly in display technologies. As researchers continue to develop novel applications for these materials, feasible solutions for large-scale manufacturing are increasingly important. Organic Light-Emitting Materials and Devices covers all aspects o

Download or read book Rational Design of Solar Cells for Efficient Solar Energy Conversion written by Alagarsamy Pandikumar and published by John Wiley & Sons. This book was released on 2018-09-05 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interdisciplinary guide to the newest solar cell technology for efficient renewable energy Rational Design of Solar Cells for Efficient Solar Energy Conversion explores the development of the most recent solar technology and materials used to manufacture solar cells in order to achieve higher solar energy conversion efficiency. The text offers an interdisciplinary approach and combines information on dye-sensitized solar cells, organic solar cells, polymer solar cells, perovskite solar cells, and quantum dot solar cells. The text contains contributions from noted experts in the fields of chemistry, physics, materials science, and engineering. The authors review the development of components such as photoanodes, sensitizers, electrolytes, and photocathodes for high performance dye-sensitized solar cells. In addition, the text puts the focus on the design of material assemblies to achieve higher solar energy conversion. This important resource: Offers a comprehensive review of recent developments in solar cell technology Includes information on a variety of solar cell materials and devices, focusing on dye-sensitized solar cells Contains a thorough approach beginning with the fundamental material characterization and concluding with real-world device application. Presents content from researchers in multiple fields of study such as physicists, engineers, and material scientists Written for researchers, scientists, and engineers in university and industry laboratories, Rational Design of Solar Cells for Efficient Solar Energy Conversion offers a comprehensive review of the newest developments and applications of solar cells with contributions from a range of experts in various disciplines.

Download or read book Polyimides and Other High Temperature Polymers Synthesis Characterization and Applications written by Kash L. Mittal and published by CRC Press. This book was released on 2005-04-18 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Third International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization, and Applications, held in Orlando, December 17-19, 2003. This volume is divided into three parts. Part 1. “Synthesis, Properties and Bulk Characterization”; Part 2 “Hybrids and Composites” and Part 3 “Applications and General Papers”. The topics covered include: Synthesis, characterization and processing (including some novel approaches) of a variety of polyimides and other high temperature polymers; structure-property relationships; hybrids and nanocomposites using these materials and their characterization, properties and applications; segmental dynamics in polyimide materials; photoalignable polyimides; photoconductivity and photosensitivity of polyimides; ultrafiltration membranes from polyetherimide; polyimide as a tunneling barrier; polymer materials for nonlinear optical applications; alignment of SWNTs in rigid-rod polymer compositions; surface modification of polyimide; adhesion of Cu to polyimide surfaces; and polyimide erosion in a low Earth orbit space environment.

Download or read book Polyimides and other high temperature polymers written by K. L. Mittal and published by VSP. This book was released on 2003-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Containing 32 peer-reviewed papers, this volume documents the proceedings of the international symposium of the same name (held under the aegis of the Materials Science and Technology Conferences) in December of 2001. Devoted to research into high-temperature polymers, the papers are organized into sections dealing with synthesis, properties, and bulk characterization in the first half and surface modification, interfacial or adhesion aspects, and applications in the second. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).

Download or read book Power Sources for the New Millennium written by M. A. Ryan and published by The Electrochemical Society. This book was released on 2001 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polyimides and Other High temperature Polymers written by K. L. Mittal and published by BRILL. This book was released on 2009-04-24 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics covered in this proceedings volume include: Synthesis, characterization and processing (including some novel approaches) of a variety of polyimides and other high temperature polymers; structure-property relationships; segmental dynamics in polyimide materials; photoalignable polyimides; photoconductivity and photosensitivity of polyimides; ultrafiltration membranes from polyetherimide; polymer materials for nonlinear optical applications; alignment of SWNTs in rigid-rod polymer compositions; surface modification of polyimide; adhesion of Cu to polyimide surfaces; and polyimide erosion in a low Earth orbit space environment.

Download or read book Handbook of Oligo and Polythiophenes written by Denis Fichou and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first concise handbook on this important new class of organic conducting materials gives a broad survey over this emerging field of research. The physical background is covered as well as the synthesis, electronic and nonlinear optical properties and applications of these advanced materials. This information will be of high value for graduate students, researchers and practitioners working in the interdisciplinary field of materials science, polymer and organic chemistry and applied physics.

Download or read book Integrating Green Chemistry and Sustainable Engineering written by Shahid ul-Islam and published by John Wiley & Sons. This book was released on 2019-04-01 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book covers the recent advances in sustainable technologies and developments, and describes how green chemistry and engineering practices are being applied and integrated in various industrial sectors. Over the past decade, the population explosion, rise in global warming, depletion of fossil fuel resources and environmental pollution have been the major driving force for promoting and implementing the principles of green chemistry and sustainable engineering in all sectors ranging from chemical to environmental sciences. It plays a growing role in the chemical processing industries. Green chemistry and engineering are relatively new areas focused on minimizing generations of pollution by utilizing alternative feedstocks, developing, selecting, and using less environmentally harmful solvents, finding new synthesis pathways, improving selectivity in reactions, generating less waste, avoiding the use of highly toxic compounds, and much more. In an effort to advance the discussion of green chemistry and engineering, this book contains 19 chapters describing greener approaches to the design and development of processes and products. The contributors describe the production of third generation biofuels, sustainable and economic production of hydrogen by water splitting using solar energy, efficient energy harvesting, mechanisms involved in the conversion of biomass, green nanocomposites, bio-based polymers, ionic liquids as green solvents, sustainable nitrogen fixation, bioremediation, and much more. The book aims at motivating chemists and engineers, as well as postgraduate and PhD students and postdocs to pay attention to an acute need for the implementation of green chemistry principles in the field of chemical engineering, biomedical engineering, agriculture, environmental engineering, chemical processing and material sciences.

Download or read book Handbook of Conducting Polymers 2 Volume Set written by Terje A. Skotheim and published by CRC Press. This book was released on 2007-01-16 with total page 1692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how recent advances are fueling new possibilities in textiles, optics, electronics, and biomedicine! As the field of conjugated, electrically conducting, and electroactive polymers has grown, the Handbook of Conducting Polymers has been there to document and celebrate these changes along the way. Now split into two vo

Download or read book Organic Light Emitting Diodes OLEDs written by Alastair Buckley and published by Elsevier. This book was released on 2013-08-31 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic light-emitting diodes (OLEDs) are opening up exciting new applications in the area of lighting and displays. OLEDs are self emissive and by careful materials and device design can generate colours across the visible spectrum. Together with simple monolithic fabrication on a range of different substrates, these diverse material properties give OLEDs key advantages over existing display and lighting technology. This important book summarises key research on materials, engineering and the range of applications of these versatile materials.Part one covers materials for OLEDs. Chapters review conjugated polymers, transparent conducting thin films, iridium complexes and phosphorescent materials. Part two discusses the operation and engineering of OLED devices. Chapters discuss topics such as highly efficient pin-type OLEDs, amorphous organic semiconductors, nanostructuring techniques, light extraction, colour tuning, printing techniques, fluorenone defects and disruptive characteristics as well as durability issues. Part three explores the applications of OLEDs in displays and solid-state lighting. Applications discussed include displays, microdisplays and transparent OLEDs, sensors and large-area OLED lighting panels.Organic light-emitting diodes (OLEDs) is a standard reference for engineers working in lighting, display technology and the consumer electronics sectors, as well as those researching OLEDs. Summarises key research on the materials, engineering and applications of OLEDs Reviews conjugated polymers, transparent conducting thin films Considers nanostructuring OLEDS for increasing levels of efficiency

Download or read book Carbon Nanomaterial Based Adsorbents for Water Purification written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2020-06-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deterioration of water quality and unavailability of drinkable water are pressing challenges worldwide. The removal of toxic organic and inorganic pollutants from water is vital for a clean environment, as a response to water scarcity. Adsorption-based water technologies are among the most widely used because of their high efficiency and low cost, without relying on a complex infrastructure. In recent years, carbon nanomaterials (CNMs), such as graphene and derivatives, carbon nanotubes, carbon nanofibers, nanoporous carbon, fullerenes, graphitic carbon nitride, and nanodiamonds have been extensively exploited as adsorbents due to their extraordinary surface properties, ease of modification, large surface area, controlled structural varieties, high chemical stability, porosity, low density, ease of regeneration, and reusability. This book provides a thorough overview of the state of the art in carbon nanomaterials as they are used for adsorption applications in water purifications, as well as addressing their toxicological challenges. This volume primarily explores the fundamentals of adsorption, its mechanical aspects, synthesis and properties of CNMs, and adsorption performances of CNMs and their nanocomposites with organic and inorganic materials. Structural engineering and activation processes produce materials with enhanced adsorptive properties and separation efficiencies. Furthermore, the formation of CNMs with 2D and 3D macro-and microstructures and high porosities is a potential approach to improve adsorption performances and extend CNM use at the industrial level. The book also addresses important issues regarding these adsorbents that potentially affect future research and industrial applications of carbon-based nanoadsorbents in water security. Presents advances in multifunctional 3D superstructures of carbon nanomaterials and their composites for adsorption applications Outlines the fundamentals on synthesis and characterization techniques of carbon-based nanostructures and their composites Assesses the major toxicological challenges in using nanostructured materials as adsorbents for water purification

Download or read book Azo Polymers written by Xiaogong Wang and published by Springer. This book was released on 2016-10-19 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores functional polymers containing aromatic azo chromophores in side-chain, main-chain and other parts of their structures, known as azo polymers and which share common photoresponsive properties. It focuses on the molecular architecture of azo polymers, the synthetic methods and their most important functions, such as photoinduced birefringence and dichroism, surface-relief-grating (SRG) formation, and light-driven deformation of liquid crystal elastomers. It combines a general survey of the subject and in-depth discussions of each topic, including numerous illustrations, figures, and photographs. Offering a balance between an introduction to the core concepts and a snapshot of hot and emerging topics, it is of interest to graduate students and researchers working in this and related fields. Xiaogong Wang is a Professor at the Department of Chemical Engineering, Tsinghua University, China.