Download or read book Synthesis and Characterization of Mixed Metal Oxide Nanocomposite Energetic Materials written by R. Simpson and published by . This book was released on 2003 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of composite energetic materials, properties such as ingredient distribution, particle size, and morphology, affect both sensitivity and performance. Since the reaction kinetics of composite energetic materials are typically controlled by the mass transport rates between reactants, one would anticipate new and potentially exceptional performance from energetic nanocomposites. We have developed a new method of making nanostructured energetic materials, specifically explosives, propellants, and pyrotechnics, using sol-gel chemistry. A novel sol-gel approach has proven successful in preparing metal oxide/silicon oxide nanocomposites in which the metal oxide is the major component. Two of the metal oxides are tungsten trioxide and iron(III) oxide, both of which are of interest in the field of energetic materials. Furthermore, due to the large availability of organically functionalized silanes, the silicon oxide phase can be used as a unique way of introducing organic additives into the bulk metal oxide materials. As a result, the desired organic functionality is well dispersed throughout the composite material on the nanoscale. By introducing a fuel metal into the metal oxide/silicon oxide matrix, energetic materials based on thermite reactions can be fabricated. The resulting nanoscale distribution of all the ingredients displays energetic properties not seen in its microscale counterparts due to the expected increase of mass transport rates between the reactants. The synthesis and characterization of these metal oxide/silicon oxide nanocomposites and their performance as energetic materials will be discussed.
Download or read book Metal Oxide Carbon Hybrid Materials written by Muhammad Akram Chaudhry and published by Elsevier. This book was released on 2022-03-20 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications reviews the advances in the fabrication and application of metal oxide–carbon-based nanocomposite materials. Their unique properties make them ideal materials for gas-sensing, photonics, catalysis, opto-electronic, and energy-storage applications. In the first section, the historical background to the hybrid materials based on metal oxide–carbon and the hybridized metal oxide composites is provided. It also highlights several popular methods for the preparation of metal oxide–carbon composites through solid-state or solution-phase reactions, and extensively discusses the materials’ properties. Fossil fuels and renewable energy sources cannot meet the ever-increasing energy demands of an industrialized and technology-driven global society. Therefore, the role of metal oxide–carbon composites in energy generation, hydrogen production, and storage devices, such as rechargeable batteries and supercapacitors, is of extreme importance. These problems are discussed in in the second section of the book. Rapid industrialization has resulted in serious environmental issues which in turn have caused serious health problems that require the immediate attention of researchers. In the third section, the use of metal oxide–carbon composites in water purification, photodegradation of industrial contaminants, and biomedical applications that can help to clean the environment and provide better healthcare solutions is described. The final section is devoted to the consideration of problems associated with the development of sensors for various applications. Numerous studies performed in this area have shown that the use of composites can significantly improve the operating parameters of such devices. Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications presents a comprehensive review of the science related to metal oxide–carbon composites and how researchers are utilizing these materials to provide solutions to a large array of problems. Reviews the fundamental properties and fabrication methods of metal-oxide–carbon composites Discusses applications in energy, including energy generation, hydrogen production and storage, rechargeable batteries, and supercapacitors Includes current and emerging applications in environmental remediation and sensing
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.
Download or read book Energetic Nanomaterials written by Vladimir E Zarko and published by Elsevier. This book was released on 2016-01-21 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energetic Nanomaterials: Synthesis, Characterization, and Application provides researchers in academia and industry the most novel and meaningful knowledge on nanoenergetic materials, covering the fundamental chemical aspects from synthesis to application. This valuable resource fills the current gap in book publications on nanoenergetics, the energetic nanomaterials that are applied in explosives, gun and rocket propellants, and pyrotechnic devices, which are expected to yield improved properties, such as a lower vulnerability towards shock initiation, enhanced blast, and environmentally friendly replacements of currently used materials. The current lack of a systematic and easily available book in this field has resulted in an underestimation of the input of nanoenergetic materials to modern technologies. This book is an indispensable resource for researchers in academia, industry, and research institutes dealing with the production and characterization of energetic materials all over the world. Written by high-level experts in the field of nanoenergetics Covers the hot topic of energetic nanomaterials, including nanometals and their applications in nanoexplosives Fills a gap in energetic nanomaterials book publications
Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures Provides an in-depth overview of novel applications, including chromogenics, electronics and energy
Download or read book Energetic Materials written by Veera Boddu and published by CRC Press. This book was released on 2010-12-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to safety reasons, energetic materials are rarely studied at research facilities. Therefore, theoretical and empirical models are needed for studying the behavior of these materials. This book provides insight into the depth and breadth of theoretical and empirical models and experimental techniques being developed for energetic materials. It presents the latest research by US Department of Defense engineers and scientists, along with their academic and industrial research partners. Some of the topics and simulations discussed can be applied to other classes of chemical compounds, such as those used in the pharmaceutical industry.
Download or read book Advanced Nanomaterials for Catalysis and Energy written by Vladislav A. Sadykov and published by Elsevier. This book was released on 2018-08-27 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials for Catalysis and Energy: Synthesis, Characterization and Applications outlines new approaches to the synthesis of nanomaterials (synthesis in flow conditions, laser electrodispersion of single metals or alloys on carbon or oxide supports, mechanochemistry, sol-gel routes, etc.) to provide systems with a narrow particle size distribution, controlled metal-support interaction and nanocomposites with uniform spatial distribution of domains of different phases, even in dense sintered materials. Methods for characterization of real structure and surface properties of nanomaterials are discussed, including synchrotron radiation diffraction and X-ray photoelectron spectroscopy studies, neutronography, transmission/scanning electron microscopy with elemental analysis, and more. The book covers the effect of nanosystems' composition, bulk and surface properties, metal-support interaction, particle size and morphology, deposition density, etc. on their functional properties (transport features, catalytic activity and reaction mechanism). Finally, it includes examples of various developed nanostructured solid electrolytes and mixed ionic-electronic conductors as materials in solid oxide fuel cells and asymmetric supported membranes for oxygen and hydrogen separation. Outlines synthetic and characterization methods for nanocatalysts Relates nanocatalysts' properties to their specific applications Proposes optimization methods aiming at specific applications
Download or read book Nanothermites written by Eric Lafontaine and published by John Wiley & Sons. This book was released on 2016-07-14 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent introduction of the “nano” dimension to pyrotechnics has made it possible to develop a new family of highly reactive substances: nanothermites. These have a chemical composition that is comparable to that of thermites at submillimeter or micrometric granulometry, but with a morphology having a much increased degree of homogeneity. This book discusses the methods of preparation of these energetic nanomaterials, their specific properties, and the different safety aspects inherent in their manipulation.
Download or read book Energetic Nanocomposites with Sol gel Chemistry written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The preparation and characterization of energetic composite materials containing nanometer-sized constituents is currently a very active and exciting area of research at laboratories around the world. Some of these efforts have produced materials that have shown very unique and important properties relative to traditional energetic materials. We have previously reported on the use of sol-gel chemical methods to prepare energetic nanocomposites. Primarily we reported on the sol-gel method to synthesize nanometer-sized ferric oxide that was combined with aluminum fuel to make pyrotechnic nanocomposites. Since then we have developed a synthetic approach that allows for the preparation of hybrid inorganic/organic energetic nanocomposites. This material has been characterized by thermal methods, energy-filtered transmission electron microscopy (EFTEM), N2 adsorption/description methods, and Fourier-Transform (FT-IR) spectroscopy, results of which will be discussed. According to these characterization methods the organic polymer phase fills the nanopores of the composite material, providing superb mixing of the component phases in the energetic nanocomposite. The EFTEM results provide a convenient and effective way to evaluate the intimacy of mixing between these component phases. The safe handling and preparation of energetic nanocomposites is of paramount importance to this research and we will report on studies performed to ensure such.
Download or read book Synthesis Characterization and Properties of Energetic reactive Nanomaterials written by Ronald D. Armstrong and published by . This book was released on 2004 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of nanomaterials has introduced a new dimension in applications of energetic and reactive materials. A fundamental understanding of their synthesis mechanisms, atomic- and molecular-scale structural characteristics, and an evaluation of properties combined with modeling of the limits to those properties are required to realize the full potential of energetic and reactive nanomaterials. Many techniques have been recently developed that make it possible to exploit the benefits of the "nano" structure and design materials with desired energy release rates and energy densities, while they also improve their safety, reliability and load-bearing capability. Advances in modeling and characterization have made it possible to determine mechanisms controlling the thermal, chemical and mechanical behavior of nanomaterials. This volume brings together researchers from around the world to assess fundamental studies on synthesis, characterization of structure, and evaluation of properties of energetic/reactive nanomaterials. Applications such as new propellant formulations, underwater detonation developments, biomedical research, and combustion of nanolayered metal films for cladding materials are featured. Topics include: applications and toxicology; synthesis; characterization; characterization and theory; theory and modeling; and general discussion.
Download or read book Metal Oxide Glass Nanocomposites written by Sanjib Bhattacharya and published by Elsevier. This book was released on 2020-02-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Glass Nanocomposites covers recent developments in metal oxide glass nanocomposites, including a discussion of synthesis methods, properties, characterization methods, and the most promising applications. The book discusses electronic and ionic conduction mechanisms of this materials system with an eye towards device applications. It also provides a comprehensive review of the material’s useful properties and structure at a technical level that is appropriate for materials scientists and engineers, physicists and chemists. Includes a comprehensive overview of metal oxide glass nanocomposite, including its optical properties, magnetic properties, electronic transport, dielectric properties, mechanical properties, and more Reviews a wide range of the most relevant applications, such as photonic, biomedical, electronic and thermoelectric Considers the advantages and disadvantages of metal oxide glass nanocomposites for utilization in key applications
Download or read book Metal Nanopowders written by Alexander A. Gromov and published by John Wiley & Sons. This book was released on 2014-04-21 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with both postgraduate students and researchers in academia and industry in mind, this reference covers the chemistry behind metal nanopowders, including production, characterization, oxidation and combustion. The contributions from renowned international scientists working in the field detail applications in technologies, scale-up processes and safety aspects surrounding their handling and storage.
Download or read book Noble Metal Metal Oxide Hybrid Nanoparticles written by Satyabrata Mohapatra and published by Elsevier. This book was released on 2018-10-11 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noble Metal-Metal Oxide Hybrid Nanoparticles: Fundamentals and Applications sets out concepts and emerging applications of hybrid nanoparticles in biomedicine, antibacterial, energy storage and electronics. The hybridization of noble metals (Gold, Silver, Palladium and Platinum) with metal-oxide nanoparticles exhibits superior features when compared to individual nanoparticles. In some cases, metal oxides act as semiconductors, such as nano zinc oxide or titanium oxide nanoparticles, where their hybridization with silver nanoparticles, enhanced significantly their photocatalytic efficiency. The book highlights how such nanomaterials are used for practical applications. Examines the properties of metal-metal oxide hybrid nanoparticles that make them so adaptable Explores the mechanisms by which nanoparticles interact with each other, showing how these can be exploited for practical applications Shows how metal oxide hybrid nanomaterials are used in a range of industry sectors, including energy, the environment and healthcare
Download or read book Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications written by Rayees Ahmad Zargar and published by John Wiley & Sons. This book was released on 2023-11-07 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL OXIDE NANOCOMPOSITE THIN FILMS FOR OPTOELECTRONIC DEVICE APPLICATIONS The book provides insight into the fundamental aspects, latest research, synthesis route development, preparation, and future applications of metal oxide nanocomposite thin films. The fabrication of thin film-based materials is important to the future production of safe, efficient, and affordable energy as the devices convert sunlight into electricity. Thin film devices allow excellent interface engineering for high-performance printable solar cells as their structures are highly reliable and stand-alone systems can provide the required megawatts. They have been used as power sources in solar home systems, remote buildings, water pumping, megawatt-scale power plants, satellites, communications, and space vehicles. Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications covers the basics of advanced nanometal oxide-based materials, their synthesis, characterization, and applications, and all the updated information on optoelectronics. Topics discussed include the implications of metal oxide thin films, which are critical for device fabrications. It provides updated information on the economic aspect and toxicity, with great focus paid to display applications, and covers some core areas of nanotechnology, which are particularly concerned with optoelectronics and the available technologies. The book concludes with insights into the role of nanotechnology and the physics behind photovoltaics. Audience The book will be an important volume for electronics and electrical engineers, nanotechnologists, materials scientists, inorganic chemists in academic research, and those in industries, exploring the applications of nanoparticles in semiconductors, power electronics, and more.
Download or read book Chemistry of Nanocrystalline Oxide Materials written by K. C. Patil and published by World Scientific. This book was released on 2008 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-oxide materials lend themselves to applications in a wide variety of emerging technological fields such as microelectronics, catalysts, ceramics, coatings, and energy storage. However, developing new routes for making nano-based materials is a challenging area for solid-state materials chemists. This book does just that by describing a novel method for preparing them. The authors have developed a novel low-temperature, self-propagating synthetic route to nano-oxides by the solution combustion and combustible precursor processes. This method provides the desired composition, structure, and properties for many types of technologically useful nanocrystalline oxide materials like alumina, ceria, iron oxides, titania, yttria, and zirconia, among others.The book is particularly instructive in bringing readers one step closer to the exploration of nanomaterials. Students of nanoscience can acquaint themselves with the actual production and evaluation of nanopowders by this route, while academic researchers and industrial scientists will find answers to a host of questions on nano-oxides. The book also provides an impetus for scientists in industrial research to evaluate and explore new ways to scale up the production of nanomaterials, offering helpful suggestions for further research.
Download or read book Nanostructured Energetic Materials Using Sol gel Methodologies written by and published by . This book was released on 2000 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental differences between energetic composites and energetic materials made from a monomolecular approach are the energy density attainable and the energy release rates. For the past 4 years, we have been exploiting sol-gel chemistry as a route to process energetic materials on a microstructural scale. At the last ISA conference, we described four specific sol-gel approaches to fabricating energetic materials and presented our early work and results on two methods - solution crystallization and powder addition. Here, we detail our work on a third approach, energetic nanocomposites. Synthesis of thermitic types of energetic nanocomposites are presented using transition and main group metal-oxide skeletons. Results on characterization of structure and performance will also be given.
