Download or read book Synthesis and Characterization of Liquid Crystalline Esters Containing ODOPB Group and Its Inclusion Complexes written by 韋伊卡 and published by . This book was released on 2011 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synthesis and Characterization of Two Azobenzene containing Ferroelectric Liquid Crystals and of Their Corresponding Polysiloxanes written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phenolic Resins A Century of Progress written by Louis Pilato and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The legacy of Leo Hendrik Baekeland and his development of phenol formal- hyde resins are recognized as the cornerstone of the Plastics Industry in the early twentieth century, and phenolic resins continue to ?ourish after a century of robust growth. On July 13, 1907, Baekeland ?led his “heat and pressure” patent related to the processing of phenol formaldehyde resins and identi?ed their unique utility in a plethora of applications. The year 2010 marks the Centennial Year of the prod- tion of phenolic resins by Leo Baekeland. In 1910, Baekeland formed Bakelite GmbH and launched the manufacture of phenolic resins in Erkner in May 1910. In October 1910, General Bakelite began producing resins in Perth Amboy, New Jersey. Lastly, Baekeland collaborated with Dr. Takamine to manufacture phenolic resins in Japan in 1911. These events were instrumental in establishing the Plastics Industry and in tracing the identity to the brilliance of Dr. Leo Baekeland. Phenolic resins remain as a versatile resin system featuring either a stable, thermoplastic novolak composition that cures with a latent source of formaldehyde (hexa) or a heat reactive and perishable resole composition that cures thermally or under acidic or special basic conditions. Phenolic resins are a very large volume resin system with a worldwide volume in excess of 5 million tons/year, and its growth is related to the gross national product (GNP) growth rate globally.

Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.

Download or read book Alloys and Composites of Polybenzoxazines written by Sarawut Rimdusit and published by Springer Science & Business Media. This book was released on 2013-07-16 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the unique and fascinating properties of alloys and composites from novel commercialized thermosetting resins based on polybenzoxazines. Their outstanding properties such as processability, thermal, mechanical, electrical properties as well as ballistic impact properties of polybenzoxazine alloys and composites make them attractive for various applications in electronic packaging encapsulation, light weight ballistic armour composites and bipolar plate in fuel cells.

Download or read book Polybenzoxazines written by Santhosh Kumar K. S. and published by Smithers Rapra Technology. This book was released on 2010 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polybenzoxazine is a novel class of thermosetting material that belongs to the family of addition-curable phenolic resins. It is a promising high temperature polymer in view of its outstanding thermal, physical, and mechanical properties that are beneficial for their application in aerospace and microelectronics industries. The first objective of this book is to provide the reader with information on the developments and properties of contemporary thermosetting polymers, along with the chemistry and curing kinetics of polybenzoxazines. The unique properties of polybenzoxazines originate from their hydrogen-bonded structures. The second objective of this book is to furnish detailed information on the syntheses and properties of various polybenzoxazines prepared from different monomers. They are categorised mainly into two types; firstly, the benzoxazine monomers containing additional crosslinking groups such as maleimide, nitrile, propargyl, acetylene, furan etc. The other is based on monomers synthesised from different phenols and amines of varying backbone structures. The third objective of this book is to elaborate the preparation and properties of the modified polybenzoxazines such as their blends and nanocomposites. The final objective of this book is to provide specific information on the degradation chemistry of polybenzoxazines under thermal, photochemical and chemical environments. The potential areas of application of these polymer systems are highlighted. This volume is intended to be a quick reference to researchers from the academia and industries on polybenzoxazine science.

Download or read book Characterisation of Copolymers written by and published by iSmithers Rapra Publishing. This book was released on 1995 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Film Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2012-04-25 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface -- 1. Introduction to Plastics and Polymers -- 2. Chapter 2 - Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers -- 3. Production of films -- 4. Markets and Applications for films -- 5. Styrenic Plastics -- 6. Polyesters -- 8. Polyamides (Nylons) -- 9. Polyolefins -- 10. Polyvinyls & Acrylics -- 11. Fluoropolymers -- 12. High Temperature/High Performance Polymers -- 13. Elastomers and rubbers -- 14. Renewable Resource or biodegradable polymers -- Appendices -- Permeation Unit Conversion Factors -- Vapor Transmission rate Conversion factors.

Download or read book Fluoropolymer Applications in the Chemical Processing Industries written by Sina Ebnesajjad and published by William Andrew. This book was released on 2017-10-30 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymer Applications in Chemical Processing Industries: The Definitive User's Guide and Handbook, Second Edition, contains the most extensive collection of data and information on fluoropolymer applications in chemical processing industries. Because of their superior properties, fluoropolymers have been rapidly replacing metal alloys for corrosion inhibition in chemical processing equipment. This book is a complete compendium of information about fluoropolymer lining materials and structural piping and tubing. Fluoropolymer surfaces preserve purity of processing streams in the chemical processing, plastics, food, pharmaceutical, semiconductor, and pulp and paper industries. Updated to reflect major changes since 2004, this book contains practical, problem-solving tools for professionals in those industries. Equipment manufacturers, plant operators, and product design and manufacturing engineers all will benefit from the in-depth knowledge provided. This new edition includes new fluoropolymer grades and new examples of the fluoropolymer role in preventing corrosion. New fabrication techniques have been added, and additional emphasis has been placed on adhesion and welding techniques. New sections have been added on inspection of new linings, and in-service inspection – including inspection frequency, acceptance criteria, fitness for service evaluation, and reparability. Includes extensive guidelines for the selection of fluoropolymers for corrosion control Features a detailed ‘how-to’ on processes that convert fluoropolymers into shapes and parts Discusses fabrication techniques to finish the fluoropolymer components before exposure to harsh chemical environments Includes laboratory techniques to determine the cause of part failure, and a modeling methodology to predict and analyze failure of fluoropolymer parts

Download or read book Conductive Polymers and Plastics written by Larry Rupprecht and published by William Andrew. This book was released on 1999-12-31 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers by individuals in industry and academia on research and application development of conductive polymers and plastics. Conductive plastics are positioned to play an increasingly important role in affairs of mankind, specifically in the area of electrical and electronic conductivity. While general knowledge about conductive polymers and plastics has been available for many years, a true understanding of their application has only taken place in the last 3 to 4 years. This is attributed to advances in materials and processing techniques. Engineers have only begun to explore the design freedom and economic benefits of specifying conductive polymers and plastics in industrial and business applications. This book is a key reference and guide to the use of conductive polymers and plastics. It is a summary of existing technologies, but also a look at future possibilities.

Download or read book Weathering of Plastics written by George Wypych and published by William Andrew. This book was released on 1999-12-31 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of extensive efforts, material weathering testing still requires improvement. This book presents findings and opinions of experts in material degradation testing. The aim is to improve testing methods and procedures. Materials are presented to show that photochemical degradation rate depends on a combination of environmental factors such as UV radiation, temperature, humidity, rain, stress, and concentration of reactive pollutants. The potential effect of each parameter of degradation on data gathered is discussed based on known results from a long experience in testing. This book contains data obtained in laboratories of the largest manufacturers of UV stabilizers and chemical companies that manufacture durable materials. The book gives details of testing procedures and choice of parameters of exposure which are crucial for obtaining laboratory results correlating with environmental performance of materials.In addition to exposure conditions, the book contains many suggestions on sample preparation and post-exposure testing. The effective use of these methods shortens testing time of materials and determines acceleration rate of testing. The book also gives examples of complete, well-designed weathering experiments which may be used as patterns for selection of parameters and techniques for new studies. The areas of research that still require more attention in future studies are clearly indicated.

Download or read book Fluoroplastics Volume 2 written by Sina Ebnesajjad and published by William Andrew. This book was released on 2015-07-30 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoroplastics, Volume 2: Melt Processible Fluoropolymers - The Definitive User's Guide and Data Book compiles the working knowledge of the polymer chemistry and physics of melt processible fluoropolymers with detailed descriptions of commercial processing methods, material properties, fabrication and handling information, technologies, and applications, also including history, market statistics, and safety and recycling aspects. Both volumes of Fluoroplastics contain a large amount of specific property data useful for users to readily compare different materials and align material structure with end use applications. Volume Two concentrates on melt-processible fluoropolymers used across a broad range of industries, including automotive, aerospace, electronic, food, beverage, oil/gas, and medical devices. This new edition is a thoroughly updated and significantly expanded revision covering new technologies and applications, and addressing the changes that have taken place in the fluoropolymer markets. Exceptionally broad and comprehensive coverage of melt processible fluoropolymers processing and applications Provides a practical approach, written by long-standing authorities in the fluoropolymers industry Thoroughly updated and significantly expanded revision covering new technologies and applications, and addressing the changes that have taken place in the fluoropolymer markets

Download or read book Fluoroplastics Volume 1 written by Sina Ebnesajjad and published by Elsevier. This book was released on 2014-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoroplastics, Volume 1, compiles in one place a working knowledge of the polymer chemistry and physics of non-melt processible fluoropolymers with detailed descriptions of commercial processing methods, material properties, fabrication and handling information, technologies, and applications. Also, history, market statistics, and safety and recycling aspects are covered. Both volumes contain a large amount of specific property data which is useful for users to readily compare different materials and align material structure with end use applications.Volume 1 concentrates mostly on polytetrafluoroethylene and polychlorotrifluoroethylene and their processing techniques – which are essentially non-melt-processes – used across a broad range of industries including automotive, aerospace, electronic, food, beverage, oil/gas, and medical devices.Since the first edition was published many new technical developments and market changes have taken place and new grades of materials have entered the market. This new edition is a thoroughly updated and significantly expanded revision covering new technologies and applications, and addressing the changes that have taken place in the fluoropolymer markets.Fluoroplastics, Volume 1 is an all-encompassing handbook for non-melt processible fluoropolymers – a unique and invaluable reference for professionals in the fluoropolymer industry and fluoropolymer application industries. Exceptionally broad and comprehensive coverage of non-melt processible fluoropolymers processing and applications. Practical approach, written by long-standing authority in the fluoropolymers industry. New technologies, materials and applications are included in the new edition.

Download or read book Polypropylene written by Clive Maier and published by William Andrew. This book was released on 1998-04-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene: The Definitive User's Guide and Databook presents in a single volume a panoramic and up-to-the-minute user's guide for today's most important thermoplastic. The book examines every aspectùscience, technology, engineering, properties, design, processing, applicationsùof the continuing development and use of polypropylene. The unique treatment means that specialists can not only find what they want but for the first time can relate to and understand the needs and requirements of others in the product development chain. The entire work is underpinned by very extensive collections of property data that allow the reader to put the information to real industrial and commercial use. Despite the preeminence and unrivaled versatility of polypropylene as a thermoplastic material to manufacture, relatively few books have been devoted to its study. Polypropylene: The Definitive User's Guide and Databook not only fills the gap but breaks new ground in doing so. Polypropylene is the most popular thermoplastic in use today, and still one of the fastest growing. Polypropylene: The Definitive User's Guide and Databook is the complete workbook and reference resource for all those who work with the material. Its comprehensive scope uniquely caters to polymer scientists, plastics engineers, processing technologists, product designers, machinery and mold makers, product managers, end users, researchers and students alike.

Download or read book Handbook of Plastics Joining written by PDL Staff and published by Cambridge University Press. This book was released on 2008-10-23 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on guide to choosing and using old and new technologies for joining plastics and elastomers. Includes detailed discussions of over 25 techniques used to join plastics to themselves and to other materials. Advantages and disadvantages of each technique along with detailed discussions of applications are presented. A second section is organized by material and provides details of using different processes with over 50 generic families of plastics and how different techniques and operating parameters affect weld strength and other criteria. This book is an excellent reference and an invaluable resource for novice and expert alike in determining the best joining technique for their application and providing guidance in how to design and prepare for production.

Download or read book Imaging and Image Analysis Applications for Plastics written by Behnam Pourdeyhimi and published by Cambridge University Press. This book was released on 1999-12-31 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad collection of techniques gathered in this book help illustrate material/process/property relationships for a wide selection of materials and processes in the plastics industry. With the recent increases in computing power and scope, as well as advances in software engineering, imaging has already become a universal tool. Image processing and image analysis have become common expressions are widely recognized within the scientific community. The imaging techniques employed range from visible optical methods to scanning and transmission electron microscopy, x-ray, thermal wave infrared and atomic force microscopy. Image analysis is used to monitor/ characterize a variety of processes. Processes included within this book are: extrusion, injection molding, foam production, film manufacture, compression molding, blow molding, vulcanization, melt spinning, reactive blending, welding, conveying, composite manufacture, compounding, and thermosetting. Imaging techniques are also employed to characterize/quantify a number of important material properties. These include: fiber orientation distribution, homogeneity of mixing, the rate of spherulites growth, polymer crystallization rate, melt flow index, pore size and shape in foam, cell density in foam, void content, particle analysis in polymer blends, morphology, interparticle distance, fiber diameter, fatigue crack, crazing, scratching, surface roughness, fiber-length distribution, nucleation, oil penetration, peel adhesion, chemical resistance, droplet-fiber transition, electrical conductivity, dispersion and impurity content.

Download or read book Flame Retardants written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2020-08-18 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry and applications of flame retardants for polymers and other materials. It starts with a description and types of flame retardants, as well as their properties and chemical structures, to include chlorine- and bromine-containing flame retardants, phosphorus-based flame retardants, nitrogen-based flame retardants, and silicones. Inorganic materials that serve as flame retardants, such as boron-based additives, graphenes, and others are discussed in detail. In addition, the following subjects are discussed in detail: Flame retardant polymers The mechanisms of flame retardants, such as flame cooling, synergetic effects, degradation of flame retardants, and others Other flame retardant compositions, such as dripping inhibitors and smoke suppressants Testing methods for flame retardants, international standards, human health hazards, such as smoke toxicity and problems with wastes Synthesis and fabrication methods, as well as recycling methods The application of flame retardants to the coating material using 3D printing, reactive coating, and bulk addition methods Non-burning comonomers, foams, nanocomposites and bio-based materials Flame retardants with other textiles, such as wool and electrical applications such as batteries