Download or read book Strontium Aluminate written by Petr Ptáček and published by BoD – Books on Demand. This book was released on 2014-07-02 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strontium aluminate cement is special inorganic cement with the properties which make it favorable for various special applications such as refractory products, macro defect free (MDF) composites, blended cements and expansive cements for high temperature applications. There is an immense number of possible combinations which can be made to prepare blended and multicomponent cements and to investigate the influence of substitutions on the properties of strontium aluminate. Divided into ten sections, this book provides the latest research achievements in many aspects of this binder. The manufacturing, the hydration process, the setting behavior and the properties are described. The book contains many original and firstly published experimental research results obtained during writing. Currently there is no comprehensive work on this topic in literature. From this point of view, the book is a pilot work on this topic and should attract the attention of researchers and bring further progress of this topic.
Download or read book Advances in Ferroelectrics written by Aimé Peláiz-Barranco and published by BoD – Books on Demand. This book was released on 2012-11-19 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectricity is one of the most studied phenomena in the scientific community due the importance of ferroelectric materials in a wide range of applications including high dielectric constant capacitors, pyroelectric devices, transducers for medical diagnostic, piezoelectric sonars, electrooptic light valves, electromechanical transducers and ferroelectric random access memories. Actually the ferroelectricity at nanoscale receives a great attention to the development of new technologies. The demand for ferroelectric systems with specific applications enforced the in-depth research in addition to the improvement of processing and characterization techniques. This book contains twenty two chapters and offers an up-to-date view of recent research into ferroelectricity. The chapters cover various formulations, their forms (bulk, thin films, ferroelectric liquid crystals), fabrication, properties, theoretical topics and ferroelectricity at nanoscale.
Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by and published by . This book was released on 1998 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy Characterization Nanofabrication and Device Application of Functional Materials written by Paula M. Vilarinho and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology.
Download or read book Sol Gel Synthesis and Processing written by Sridhar Komarneni and published by Wiley-American Ceramic Society. This book was released on 1998-02-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings of the International Symposium on Sol-Gel Processing, held at the 100th Annual Meeting of the American Ceramic Society in Cincinnati, Ohio, May 3-6, 1998"--verso of T.p.
Download or read book Design Fabrication and Characterization of Multifunctional Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2021-11-24 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Fabrication, and Characterization of Multifunctional Nanomaterials covers major techniques for the design, synthesis, and development of multifunctional nanomaterials. The chapters highlight the main characterization techniques, including X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, and scanning probe microscopy.The book explores major synthesis methods and functional studies, including: - Brillouin spectroscopy; - Temperature-dependent Raman spectroscopic studies; - Magnetic, ferroelectric, and magneto-electric coupling analysis; - Organ-on-a-chip methods for testing nanomaterials; - Magnetron sputtering techniques; - Pulsed laser deposition techniques; - Positron annihilation spectroscopy to prove defects in nanomaterials; - Electroanalytic techniques. This is an important reference source for materials science students, scientists, and engineers who are looking to increase their understanding of design and fabrication techniques for a range of multifunctional nanomaterials. - Explains the major design and fabrication techniques and processes for a range of multifunctional nanomaterials; - Demonstrates the design and development of magnetic, ferroelectric, multiferroic, and carbon nanomaterials for electronic applications, energy generation, and storage; - Green synthesis techniques and the development of nanofibers and thin films are also emphasized.
Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 2002 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Mechanical Nanostructuring written by Mahmood Aliofkhazraei and published by John Wiley & Sons. This book was released on 2015-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing in-depth information on how to obtain high-performance materials by controlling their nanostructures, this ready reference covers both the bottom-up and the top-down approaches to the synthesis and processing of nanostructured materials. The focus is on advanced methods of mechanical nanostructuring such as severe plastic deformation, including high pressure torsion, equal channel angular processing, cyclic extrusion compression, accumulative roll bonding, and surface mechanical attrition treatment. As such, the contents are inherently application-oriented, with the methods presented able to be easily integrated into existing production processes. In addition, the structure-property relationships and ways of influencing the nanostructure in order to exhibit a desired functionality are reviewed in detail. The whole is rounded off by a look at future directions, followed by an overview of applications in various fields of structural and mechanical engineering. With its solutions for successful processing of complex-shaped workpieces and large-scale specimens with desired properties, this is an indispensable tool for purposeful materials design.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Sol gel Based Nanoceramic Materials Preparation Properties and Applications written by Ajay Kumar Mishra and published by Springer. This book was released on 2016-12-10 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes recent research and development in the field of nanostructured ceramics and their composites. It presents selected examples of ceramic materials with special electronic, catalytic and optical properties and exceptional mechanical characteristics. A special focus is on sol-gel based and organic-inorganic hybrid nanoceramic materials. The book highlights examples for preparation techniques including scale-up, properties of smart ceramic composites, and applications including e.g. waste water treatment, heavy metal removal, sensors, electronic devices and fuel cells. Recent challenges are addressed and potential solutions are suggested for these. This book hence addresses chemists, materials scientists, and engineers, working with nanoceramic materials and on their applications.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials Forum I written by Maria Teresa Vieira and published by Trans Tech Publications Ltd. This book was released on 2002-10-25 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1st International Materials Symposium, Coimbra, Portugal, April 9-11, 2001
Download or read book Handbook of Hydrothermal Technology written by K. Byrappa and published by William Andrew. This book was released on 2012-12-31 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quartz, zeolites, gemstones, perovskite type oxides, ferrite, carbon allotropes, complex coordinated compounds and many more -- all products now being produced using hydrothermal technology. Handbook of Hydrothermal Technology brings together the latest techniques in this rapidly advancing field in one exceptionally useful, long-needed volume.The handbook provides a single source for understanding how aqueous solvents or mineralizers work under temperature and pressure to dissolve and recrystallize normally insoluble materials, and decompose or recycle any waste material. The result, as the authors show in the book, is technologically the most efficient method in crystal growth, materials processing, and waste treatment. The book gives scientists and technologists an overview of the entire subject including: À Evolution of the technology from geology to widespread industrial use. À Descriptions of equipment used in the process and how it works.À Problems involved with the growth of crystals, processing of technological materials, environmental and safety issues.À Analysis of the direction of today's technology. In addition, readers get a close look at the hydrothermal synthesis of zeolites, fluorides, sulfides, tungstates, and molybdates, as well as native elements and simple oxides. Delving into the commercial production of various types, the authors clarify the effects of temperature, pressure, solvents, and various other chemical components on the hydrothermal processes. - Gives an overview of the evolution of Hydrothermal Technology from geology to widespread industrial use - Describes the equipment used in the process and how it works - Discusses problems involved with the growth of crystals, processing of technological materials, and environmental and safety issues
