Download or read book Progress in Polymer Research for Biomedical Energy and Specialty Applications written by Anandhan Srinivasan and published by CRC Press. This book was released on 2022-10-03 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid advancements in polymer research, polymers are finding newer applications such as scaffolds for tissue engineering, wound healing, flexible displays, and energy devices. In the same spirit, this book covers the key features of recent advancements in polymeric materials and their specialty applications. Divided into two sections – Polymeric Biomaterials and Polymers from Sustainable Resources, and Polymers for Energy and Specialty Applications – this book covers biopolymers, polymer-based biomaterials, polymer-based nanohybrids, polymer nanocomposites, polymer-supported regenerative medicines, and advanced polymer device fabrication techniques. FEATURES Provides a comprehensive review of all different polymers for applications in tissue engineering, biomedical implants, energy storage or conversion, and so forth Discusses advanced strategies in development of scaffolds for tissue engineering Elaborates various advanced fabrication techniques for polymeric devices Explores the nuances in polymer-based batteries and energy harvesting Reviews advanced polymeric membranes for fuel cells and polymers for printed electronics applications Throws light on some new polymers and polymer nanocomposites for optoelectronics, next generation tires, smart sensors and stealth technology applications This book is aimed at academic researchers, industry personnel, and graduate students in the interdisciplinary fields of polymer and materials technology, composite engineering, biomedical engineering, applied chemistry, chemical engineering, and advanced polymer manufacturing.

Download or read book Alkaline Anion Exchange Membranes for Fuel Cells written by Jince Thomas and published by John Wiley & Sons. This book was released on 2024-02-07 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alkaline Anion Exchange Membranes for Fuel Cells Build the fuel cells of the future with this cutting-edge material Alkaline anion exchange membranes (AAEMs) are cutting-edge polyelectrolyte materials with growing renewable energy applications including fuel cells, batteries, hydrogen electrolyzers and electrodialysis technologies. Their use in relatively new alkaline exchange membrane fuel cells (AEMFCs) is designed to produce cost-effective clean energy (electricity) produced by a chemical reaction. Rigorous studies are being conducted to meet the requirements of AAEMs precisely tailored for high anion conductivity and durability for future high energy efficient devices. Hence, over the past few years the academic and industrial scientific communities have explored various polymeric, composite and inorganic materials and studied their properties as a potential AAEM. The accumulated literature in this area of investigation is vast and in order to provide the community with the tools needed to strive forward, there is a clear need to condense this information in a single volume. Alkaline Anion Exchange Membranes for Fuel Cells meets this need with a comprehensive overview of the properties of these membranes and their applications. The book considers recent developments, common challenges, and the long-term prospects for this field of research and engineering. It constitutes a one-stop resource for the development and production of AAEM fuel cells and related electrochemical applications. Alkaline Anion Exchange Membranes for Fuel Cells readers will find: Discussion of electrochemical applications like redox flow batteries, water electrolysis, and many more Detailed treatment of specially tailored cationic groups such as quaternary ammonium and guanidinium Expert advice on efficient fabrication and electrode assembly Alkaline Anion Exchange Membranes for Fuel Cells is ideal for electrochemists, materials scientists, polymer chemists, electrical engineers, and anyone working in power technology or related fields.

Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.

Download or read book Click Polymerization written by Anjun Qin and published by Royal Society of Chemistry. This book was released on 2018-08-28 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Click Polymerization has been edited by world renowned experts and provides an authoritative guide to this reaction type.

Download or read book Colloids for Nanobiotechnology written by Wolfgang Parak and published by Elsevier. This book was released on 2020-04-29 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloids for Nanobiotechnology: Synthesis, Characterization and Potential Applications, Volume 17, offers a range of perspectives on emerging nano-inspired colloidal applications. With an emphasis on biomedical and environmental opportunities and challenges, the book outlines how nanotechnology is being used to increase the uses and impact of colloid science. Nanotechnology offers new horizons for colloidal research and synthesis routes that allow for the production of highly reproducible and defined materials. This book presents new characterization methods and a fundamental understanding of basic physicochemical, physical and chemical properties.

Download or read book Sulfur Containing Polymers written by Xing-Hong Zhang and published by John Wiley & Sons. This book was released on 2021-03-23 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-have resource to the booming field of sulfur-containing polymers Sulfur-Containing Polymers is a state-of-the-art text that offers a synthesis of the various sulfur-containing polymers from low-cost sulfur resources such as elemental sulfur, carbon disulfide (CS2), carbonyl sulfide (COS) and mercaptan. With contributions from noted experts on the topic, the book presents an in-depth understanding of the mechanisms related to the synthesis of sulfur-containing polymers. The book also includes a review of the various types of sulfur-containing polymers, such as: poly(thioester)s, poly(thioether)s and poly(thiocarbonate)s and poly(thiourethane)s with linear or hyperbranched (dendrimer) architectures. The expert authors provide the fundamentals on the structure-property relationship and applications of sulfur-containing polymers. Designed to be beneficial for both research and application-oriented chemists and engineers, the book contains the most recent research and developments of sulfur-containing polymers. This important book: Offers the first comprehensive handbook on the topic Contains state-of-the-art research on synthesis of sulfur containing polymers from low-cost sulfur-containing compounds Examines the synthesis, mechanism, structure properties, and applications of various types of sulful-containing polymers Includes contributions from well-known experts Written for polymer chemists, materials scientists, chemists in industry, biochemists, and chemical engineers, Sulfur-Containing Polymers offers a groundbreaking text to the field with inforamtion on the most recent research.

Download or read book Handbook of Specialty Fluorinated Polymers written by Susanta Banerjee and published by William Andrew. This book was released on 2015-04-24 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers are used in applications demanding service at enhanced temperature while maintaining their structural integrity and have excellent combination of chemical, physical and mechanical properties. Advancements in materials and processing technology mean that a huge amount of research is currently taking place into new, high performance applications for specialty fluorinated polymers. This book is a complete review of the current research in synthesizing new fluorinated high performance polymers and their application in the field of low dielectric constant materials, membrane based separation (gas and liquid) and proton exchange membranes. Special emphasis is given to the preparation of soluble high performance polymers by incorporating fluorine and different structural elements so as to use these classes of polymers in different membrane based applications, including low dielectric constant materials, gas separation, pervaporation, proton exchange membranes in fuel cells, and more. The coverage of processing properties and commercial aspects - as well as a practical assessment of the advantages and disadvantages of specialty fluoropolymers compared to other materials - enables engineers and product designers to apply the latest scientific developments in this area in a practical setting. Thorough coverage of modern applications for specialty fluorinated polymers, including membranes and coatings – giving insight into recent research and the future direction of this technology Brings researchers and engineers up to date with the latest developments in specialty fluoropolymers, to assist in future materials research and part design Includes detailed assessment of the advantages and shortcomings of specialty fluorinated polymers, for ease of comparison with alternative materials

Download or read book Thiol X Chemistries in Polymer and Materials Science written by Andrew B. Lowe and published by Royal Society of Chemistry. This book was released on 2013 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on thiol-x chemistries for postgraduates, academics and industrial practitioners interested in polymer and materials applications from leading experts in the field.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)

Download or read book Dendrimer Chemistry written by Fritz Vögtle and published by John Wiley & Sons. This book was released on 2009-03-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by internationally acclaimed authors, this textbook contains everything you need to know about this versatile class of compounds. Starting with a historical overview, definitions and other fundamentals, it goes on to look at characterization, analysis and properties of dendrimers. While the focus is on synthesis and applications, it also contains chapters on analytics and other applications. Essential reading for organic and polymer chemists, undergraduate and graduate students, students and lecturers in chemistry.

Download or read book Aromatic Thiols and Their Derivatives written by Ismayil A. Aliyev and published by Springer Nature. This book was released on 2021-05-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the synthetic and physical chemistry of aromatic thiols and their closest derivatives, sulfides, sulfoxides, sulfones, including those substituted by various functional groups such as acyl and thioacyl, alkoxide, ester, hydroxyl and halogens. In some cases, for comparison, selenium and oxygen analogues are also detailed. The main focus of the book is on synthetic methods, both traditional and new, based on the use of transition metals as catalysts, as well as the reactivity of the compounds obtained. Its addition to the influence of conformational and electronic factors on spectral (NMR, IR, UV, NQR) and electrochemical characteristics of the compounds is presented. Finally, the book describes the application of aromatic thiols and their derivatives as drug precursors, high-tech materials, building blocks for organic synthesis, analytical reagents and additives for oils and fuels. It is a useful handbook for all those interested in organosulfur chemistry.

Download or read book Nanocarbons for Energy Conversion Supramolecular Approaches written by Naotoshi Nakashima and published by Springer. This book was released on 2018-08-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on nanocarbons (carbon nanotubes, graphene, nanoporous carbon, and carbon black) and related materials for energy conversion, including fuel cells (predominately proton exchange membrane fuel cells [PEMFC]), Li-ion batteries, and supercapacitors. Written by a group of internationally recognized researchers, it offers an in-depth review of the structure, properties, and functions of nanocarbons, and summarizes recent advances in the design, fabrication and characterization of nanocarbon-based catalysts for energy applications. As such, it is an invaluable resource for graduate students, academics and industrial scientists interested in the areas of nanocarbons, energy materials for fuel cells, batteries and supercapacitors as well as materials design, and supramolecular science.

Download or read book High Performance Polymers Polyimides Based written by Marc Abadie and published by BoD – Books on Demand. This book was released on 2012-12-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The feature of polyimides and other heterocyclic polymers are now well-established and used for long term temperature durability in the range of 250 - 350'C. This book will review synthesis, mechanisms, ultimate properties, physico-chemical properties, processing and applications of such high performance materials needed in advanced technologies. It presents interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research. The volume contains eleven chapters divided into three sections: Chemistry; Chemical and Physical Properties; and Applications.

Download or read book Dendrimers written by Fritz Vögtle and published by Springer. This book was released on 2003-09-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dendrimers are a class of highly branched molecules that combine the properties of polymers and small discrete molecules. One classified among the exotic molecules of chemistry, dendrimers have attracted considerable attention in recent years, as their unique host/guest properties and their capability of being functionalized in the periphery as well in the core have led to new materials with a great potential for applications. This volume presents the state of art in this blossoming area, written by pioneers in the fields. Covering the synthetic, supramolecular, stereochemical, host/guest and polymer chemistry of dendritic and hyperbranched molecules, this volume explains both theoretical and practical aspects, including chirality reactivity, mechanism, material properties and biological relevance.

Download or read book Functionalized Polysulfones written by Silvia Ioan and published by CRC Press. This book was released on 2015-04-24 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized Polysulfones: Synthesis, Characterization, and Applications focuses on polysulfones and their derivatives, which are widely used as functional materials in the biochemical, industrial, and medical fields due to their structural and physical characteristics, such as good optical properties, high thermal and chemical stability, mechani

Download or read book Microwave Assisted Polymerization written by Anuradha Mishra and published by Royal Society of Chemistry. This book was released on 2015-10-28 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer science faces the challenge of meeting growing market demand for polymers whilst achieving sustainability through environmentally friendly processes. Microwave heating has emerged as a greener technique that accelerates a variety of chemical reactions, including polymerization. Microwave-assisted reactions can be cleaner and more rapid and economic analyses suggest that the cost of curing polymers may be reduced by switching over to the use of microwaves. This book provides comprehensive coverage of microwave-assisted polymerization. The first chapter introduces readers to the theory behind the accelerating effects of microwaves on chemical reactions and covers the types of commercial microwave reactors being used for synthesis and processing of polymers that are available on the market. Subsequent chapters are organised by type of reaction, including radical homo and co-polymerizations, step growth polymerization and peptide synthesis. Importantly, analysis of processes and product properties in comparison with conventional methods is also detailed. This book will be a valuable resource for green chemists and polymer scientists and engineers who want to develop sustainable processes.