Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Surface Analysis Methods in Materials Science written by D.J. O'Connor and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallurgy, materials science and materials engineering; - postgraduate students undertaking research that involves the use of analytical techniques; - groups of scientists and engineers attending training courses and workshops on the application of surface analytical techniques in materials science; - industrial scientists and engineers in research and development seeking a description of available surface analytical techniques and guidance on the most appropriate techniques for particular applications. The contributors mostly come from Australia, with the notable exception of Ray Browning from Stanford University.
Download or read book Computational Mesomechanics of Composites written by Leon L. Mishnaevsky, Jr and published by John Wiley & Sons. This book was released on 2007-08-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical properties of composite materials can be improved by tailoring their microstructures. Optimal microstructures of composites, which ensure desired properties of composite materials, can be determined in computational experiments. The subject of this book is the computational analysis of interrelations between mechanical properties (e.g., strength, damage resistance stiffness) and microstructures of composites. The methods of mesomechanics of composites are reviewed, and applied to the modelling of the mechanical behaviour of different groups of composites. Individual chapters are devoted to the computational analysis of the microstructure- mechanical properties relationships of particle reinforced composites, functionally graded and particle clusters reinforced composites, interpenetrating phase and unidirectional fiber reinforced composites, and machining tools materials.
Download or read book Thin Film Phenomena written by Kasturi L. Chopra and published by . This book was released on 1979 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Photovoltaic Science and Engineering written by Antonio Luque and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive, authoritative and widely cited reference on photovoltaic solar energy Fully revised and updated, the Handbook of Photovoltaic Science and Engineering, Second Edition incorporates the substantial technological advances and research developments in photovoltaics since its previous release. All topics relating to the photovoltaic (PV) industry are discussed with contributions by distinguished international experts in the field. Significant new coverage includes: three completely new chapters and six chapters with new authors device structures, processing, and manufacturing options for the three major thin film PV technologies high performance approaches for multijunction, concentrator, and space applications new types of organic polymer and dye-sensitized solar cells economic analysis of various policy options to stimulate PV growth including effect of public and private investment Detailed treatment covers: scientific basis of the photovoltaic effect and solar cell operation the production of solar silicon and of silicon-based solar cells and modules how choice of semiconductor materials and their production influence costs and performance making measurements on solar cells and modules and how to relate results under standardised test conditions to real outdoor performance photovoltaic system installation and operation of components such as inverters and batteries. architectural applications of building-integrated PV Each chapter is structured to be partially accessible to beginners while providing detailed information of the physics and technology for experts. Encompassing a review of past work and the fundamentals in solar electric science, this is a leading reference and invaluable resource for all practitioners, consultants, researchers and students in the PV industry.
Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by Michael Anthony Nastasi and published by Springer Science & Business Media. This book was released on 1993 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging class of new materials characterized by ultra-fine microstrucures. The NATO ASI which produced this book was the first international scientific meeting devoted to a discussion of the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Topics covered include superplasticity, tribology, and the supermodulus effect. Review chapters cover a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties. Much of the work is concerned with the issue of how far conventional techniques and concepts can be extended toward atomic scale probing. Another key issue concerns the structure of nanocrystalline materials, in particular, what is the structure and composition of the internal boundaries. These ultra-fine microstructures have proved to challenge even the finest probes that the materials science community has today.
Download or read book THERMEC 2013 written by B. Mishra and published by Trans Tech Publications Ltd. This book was released on 2014-05-23 with total page 2893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 8th International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, December 2-6, 2013, Las Vegas, USA
Download or read book Advances in Abrasive Based Machining and Finishing Processes written by S. Das and published by Springer Nature. This book was released on 2020-05-10 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the advances in abrasive based machining and finishing in broad sense. Specifically, the book covers the novel machining and finishing strategies implemented in various advanced machining processes for improving machining accuracy and overall quality of the product. This book presents the capability of advanced machining processes using abrasive grain. It also covers ways for enhancing the production rate as well as quality. It fulfills the gap between the production of any complicated components and successful machining with abrasive particles.
Download or read book Advances in Chemical Mechanical Planarization CMP written by Babu Suryadevara and published by Woodhead Publishing. This book was released on 2021-09-10 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Mechanical Planarization (CMP), Second Edition provides the latest information on a mainstream process that is critical for high-volume, high-yield semiconductor manufacturing, and even more so as device dimensions continue to shrink. The second edition includes the recent advances of CMP and its emerging materials, methods, and applications, including coverage of post-CMP cleaning challenges and tribology of CMP. This important book offers a systematic review of fundamentals and advances in the area. Part one covers CMP of dielectric and metal films, with chapters focusing on the use of current and emerging techniques and processes and on CMP of various materials, including ultra low-k materials and high-mobility channel materials, and ending with a chapter reviewing the environmental impacts of CMP processes. New content addressed includes CMP challenges with tungsten, cobalt, and ruthenium as interconnect and barrier films, consumables for ultralow topography and CMP for memory devices. Part two addresses consumables and process control for improved CMP and includes chapters on CMP pads, diamond disc pad conditioning, the use of FTIR spectroscopy for characterization of surface processes and approaches for defection characterization, mitigation, and reduction. Advances in Chemical Mechanical Planarization (CMP), Second Edition is an invaluable resource and key reference for materials scientists and engineers in academia and R&D. - Reviews the most relevant techniques and processes for CMP of dielectric and metal films - Includes chapters devoted to CMP for current and emerging materials - Addresses consumables and process control for improved CMP, including post-CMP
Download or read book Surface Engineering of Metals written by Tadeusz Burakowski and published by CRC Press. This book was released on 1998-12-23 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.
Download or read book Materials Science of Carbides Nitrides and Borides written by Yury G. Gogotsi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of current research on a wide range of carbide, nitride and boride materials, covering the general issues relevant to the development and characterisation of a variety of advanced materials. Topics include structure and electronic properties, modeling, processing, high-temperature chemistry, oxidation and corrosion, mechanical behaviour, manufacturing and applications. The volume complements more specialised books on specific materials as well as more general texts on ceramics or hard materials, presenting a survey of materials research as a key to technological development. After decades of research, the materials are being used in electronics, wear resistant, refractory and other applications, but numerous new applications are possible. Roughly equal numbers of papers cover theoretical and experimental research in the general field of materials science of refractory materials. Audience: Researchers and graduate students in materials science and engineering.
Download or read book Composite Materials written by Deborah D.L. Chung and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials is a modern reference book, tutorial in style, covering functions of composites relating to applications in electronic packaging, thermal management, smart structures and other timely technologies rarely covered in existing books on composites. It also treats materials with polymer, metal, cement, carbon and ceramics matrices, contrasting with others that emphasise polymer-matrix composites. This functional approach will be useful to both practitioners and students. A good selection of example problems, solutions and figures, together with a new and vibrant approach, provides a valuable reference source for all engineers working with composite materials.
Download or read book Plastics for Corrosion Inhibition written by V.A. Goldade and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key problems of failure-free operation of machinery is prevention of corrosion. The global scale of modern production makes this problem even more critical. At the beginning of the 21st century industrial contami- tion and the corrosion-active nature of the environment reached a level such that corrosive damage of materials became commensurate with their prod- tion volume and expenditure on anticorrosion protection of machines became comparable with investments in basic production. Anticorrosion techniques changed from being an auxiliary service to industrial enterprises into a dev- oping, scienti?cally intensive and generously ?nanced branch of production. Polymers occupy a very speci?c place amongst anticorrosion techniques. Polymers combine good chemical resistance with impermeability to di?- ent media and unusual deformation characteristics. The main principle of their application as anticorrosion means is the creation of a tight barrier that insulates metal machine parts or constructions from corrosion agents. The advantages of polymers allow the creation of such a barrier at minimal cost,providingprotectionoftheworkingmachinesfromcorrosion,combining their manufacture with preservation and decreasing the cost of anticorrosion. This is one of the main reasons why world production of polymer materials increased by almost 50% in the past decade.
Download or read book Classic and Advanced Ceramics written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2010-04-16 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's lectures to graduate students of geosciences, physics, chemistry and materials science, this didactic handbook covers basic aspects of ceramics such as composition and structure as well as such advanced topics as achieving specific functionalities by choosing the right materials. The focus lies on the thermal transformation processes of natural raw materials to arrive at traditional structural ceramics and on the general physical principles of advanced functional ceramics. The book thus provides practice-oriented information to readers in research, development and engineering on how to understand, make and improve ceramics and derived products, while also serving as a rapid reference for the practitioner. The choice of topics and style of presentation make it equally useful for chemists, materials scientists, engineers and mineralogists.
Download or read book Microelectronic Applications of Chemical Mechanical Planarization written by Yuzhuo Li and published by John Wiley & Sons. This book was released on 2007-10-19 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative, systematic, and comprehensive description of current CMP technology Chemical Mechanical Planarization (CMP) provides the greatest degree of planarization of any known technique. The current standard for integrated circuit (IC) planarization, CMP is playing an increasingly important role in other related applications such as microelectromechanical systems (MEMS) and computer hard drive manufacturing. This reference focuses on the chemical aspects of the technology and includes contributions from the foremost experts on specific applications. After a detailed overview of the fundamentals and basic science of CMP, Microelectronic Applications of Chemical Mechanical Planarization: * Provides in-depth coverage of a wide range of state-of-the-art technologies and applications * Presents information on new designs, capabilities, and emerging technologies, including topics like CMP with nanomaterials and 3D chips * Discusses different types of CMP tools, pads for IC CMP, modeling, and the applicability of tribometrology to various aspects of CMP * Covers nanotopography, CMP performance and defect profiles, CMP waste treatment, and the chemistry and colloidal properties of the slurries used in CMP * Provides a perspective on the opportunities and challenges of the next fifteen years Complete with case studies, this is a valuable, hands-on resource for professionals, including process engineers, equipment engineers, formulation chemists, IC manufacturers, and others. With systematic organization and questions at the end of each chapter to facilitate learning, it is an ideal introduction to CMP and an excellent text for students in advanced graduate courses that cover CMP or related semiconductor manufacturing processes.
