Download or read book Swirling Flows and Flames written by Toufik Boushaki and published by BoD – Books on Demand. This book was released on 2019-06-26 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Swirl flows are used in a wide range of industrial applications. In non-reacting cases, examples of applications include vortex amplifiers and reactors, heat exchangers, jet pumps, and cyclone separators. In reacting cases, swirlers are widely used in combustion systems, such as gas turbines, industrial furnaces, boilers, gasoline and diesel engines, and many other practical heating devices. Effects of using swirl on flow and combustion are significant and varied, and concern, for example, aerodynamics, mixing, flame stability, intensity of combustion, and pollutant emissions. The purpose of this book is to present recent research efforts to understand and characterize swirling flows of different types and in different applications. These include gaseous, liquid, and solid fuels in order to enhance combustion systems and their energy efficiency. Swirl flows are very complex and the studies proposed in this project are based on different means, including theoretical calculations, numerical modeling, and experimental measurements.
Download or read book Swirl Flows written by Ashwani K. Gupta and published by Routledge. This book was released on 1984 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stabilization and Dynamic of Premixed Swirling Flames written by Paul Palies and published by Academic Press. This book was released on 2020-07-03 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stabilization and Dynamic of Premixed Swirling Flames: Prevaporized, Stratified, Partially, and Fully Premixed Regimes focuses on swirling flames in various premixed modes (stratified, partially, fully, prevaporized) for the combustor, and development and design of current and future swirl-stabilized combustion systems. This includes predicting capabilities, modeling of turbulent combustion, liquid fuel modeling, and a complete overview of stabilization of these flames in aeroengines. The book also discusses the effects of the operating envelope on upstream fresh gases and the subsequent impact of flame speed, combustion, and mixing, the theoretical framework for flame stabilization, and fully lean premixed injector design. Specific attention is paid to ground gas turbine applications, and a comprehensive review of stabilization mechanisms for premixed, partially-premixed, and stratified premixed flames. The last chapter covers the design of a fully premixed injector for future jet engine applications. - Features a complete view of the challenges at the intersection of swirling flame combustors, their requirements, and the physics of fluids at work - Addresses the challenges of turbulent combustion modeling with numerical simulations - Includes the presentation of the very latest numerical results and analyses of flashback, lean blowout, and combustion instabilities - Covers the design of a fully premixed injector for future jet engine applications
Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2012-08-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.
Download or read book Coarse Grained Simulation and Turbulent Mixing written by Fenando F. Grinstein and published by Cambridge University Press. This book was released on 2016-06-30 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews our current understanding of the subject. For graduate students and researchers in computational fluid dynamics and turbulence.
Download or read book Combustion Aerodynamics written by János Miklós Beér and published by . This book was released on 1983 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Gallery of Combustion and Fire written by Charles E. Baukal, Jr. and published by Cambridge University Press. This book was released on 2020-09-03 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Gallery of Combustion and Fire is the first book to provide a graphical perspective of the extremely visual phenomenon of combustion in full color. It is designed primarily to be used in parallel with, and supplement existing combustion textbooks that are usually in black and white, making it a challenge to visualize such a graphic phenomenon. Each image includes a description of how it was generated, which is detailed enough for the expert but simple enough for the novice. Processes range from small scale academic flames up to full scale industrial flames under a wide range of conditions such as low and normal gravity, atmospheric to high pressures, actual and simulated flames, and controlled and uncontrolled flames. Containing over 500 color images, with over 230 contributors from over 75 organizations, this volume is a valuable asset for experts and novices alike.
Download or read book Combustion Noise written by Anna Schwarz and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: November, 2008 Anna Schwarz, Johannes Janicka In the last thirty years noise emission has developed into a topic of increasing importance to society and economy. In ?elds such as air, road and rail traf?c, the control of noise emissions and development of associated noise-reduction techno- gies is a central requirement for social acceptance and economical competitiveness. The noise emission of combustion systems is a major part of the task of noise - duction. The following aspects motivate research: • Modern combustion chambers in technical combustion systems with low pol- tion exhausts are 5 - 8 dB louder compared to their predecessors. In the ope- tional state the noise pressure levels achieved can even be 10-15 dB louder. • High capacity torches in the chemical industry are usually placed at ground level because of the reasons of noise emissions instead of being placed at a height suitable for safety and security. • For airplanes the combustion emissions become a more and more important topic. The combustion instability and noise issues are one major obstacle for the introduction of green technologies as lean fuel combustion and premixed burners in aero-engines. The direct and indirect contribution of combustion noise to the overall core noise is still under discussion. However, it is clear that the core noise besides the fan tone will become an important noise source in future aero-engine designs. To further reduce the jet noise, geared ultra high bypass ratio fans are driven by only a few highly loaded turbine stages.
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Combustion Technology written by Vasudevan Raghavan and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the fundamentals aspects of combustion, covering fundamental thermodynamics and chemical kinetics through to practical burners. It provides a detailed analysis of the basic ideas and design characteristics of burners for gaseous, liquid and solid fuels. End of chapter review questions help the reader to evaluate their understanding of both the fundamental as well as the application aspects. Furthermore, a chapter on alternative renewable fuels has been included to bring out the need, characteristics and usage of alternative fuels along with fossil fuels. A section on future trends in fuels and burners is also provided. Several key research articles have been cited in the text and listed in the references.
Download or read book Combustion Instabilities in Gas Turbine Engines written by Timothy C. Lieuwen and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2005 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers gas turbine users and manufacturers a valuable resource to help them sort through issues associated with combustion instabilities. In the last ten years, substantial efforts have been made in the industrial, governmental, and academic communities to understand the unique issues associated with combustion instabilities in low-emission gas turbines. The objective of this book is to compile these results into a series of chapters that address the various facets of the problem. The Case Studies section speaks to specific manufacturer and user experiences with combustion instabilities in the development stage and in fielded turbine engines. The book then goes on to examine The Fundamental Mechanisms, The Combustor Modeling, and Control Approaches.
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Flow Mixing and Heat Transfer in Furnaces written by K. H. Khalil and published by Elsevier. This book was released on 2014-05-18 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: HMT: The Science & Application of Heat and Mass Transfer: Reports, Reviews & Computer Programs, Volume 2: Flow, Mixing and Heat Transfer in Furnaces is a collection of papers from the First Conference on Mechanical Power Engineering. The title presents experimental and theoretical research in the field of flow, mixing, and heat transfer in furnaces. The experimental papers in the selection include the effect of the exit section geometry and furnace length on mixing in a cold model industrial furnace, as well as the effect of some parameters on the characteristics of heat liberated along a cylindrical reversed flow furnace. The theoretical papers tackle topics such as study of mixing of two coaxial swirling jets in a cold model furnace and numerical computations of turbulent swirling flames in axisymmetric combustors. The book will be of great use to students, researchers, and practitioners of mechanical engineering.
Download or read book Recent Asian Research on Thermal and Fluid Sciences written by Abhilash Suryan and published by Springer Nature. This book was released on 2020-02-18 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of the best papers from the Seventh Asian Joint Workshop on Thermophysics and Fluid Science (AJWTF7 2018), which was held in Trivandrum, India, in November 2018. The papers highlight research outputs from India, China, Japan, Korea and Bangladesh, and many of them report on collaborative efforts by researchers from these countries. The topics covered include Aero-Acoustics, Aerodynamics, Aerospace Engineering, Bio-Fluidics, Combustion, Flow Measurement, Control and Instrumentation, Fluid Dynamics, Heat and Mass Transfer, Thermodynamics, Mixing and Chemically Reacting Flows, Multiphase Flows, Micro/Nano Flows, Noise/NOx/SOx Reduction, Propulsion, Transonic and Supersonic Flows, and Turbomachinery. The book is one of the first on the topic to gather contributions from some of the leading countries in Asia. Given its scope, it will benefit researchers and students working on research problems in the thermal and fluid sciences.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Applied Combustion Diagnostics written by Katharina Kohse-Hoinghaus and published by CRC Press. This book was released on 2002-04-26 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measuremen
Download or read book Fluid Flow Problems written by Farhad Ali and published by BoD – Books on Demand. This book was released on 2019-05-29 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: In physics and engineering, fluid dynamics is a subdiscipline of fluid mechanics that describes the flow of fluids, liquids, and gases. It has several subdisciplines, including aerodynamics (the study of air and other gases in motion) and hydrodynamics (the study of liquids in motion). Fluid dynamics has a wide range of applications, including calculating forces and moments on aircraft, determining the mass flow rate of petroleum through pipelines, predicting weather patterns, understanding nebulae in interstellar space and modeling fission weapon detonation. In this book, we provide readers with the fundamentals of fluid flow problems. Specifically, Newtonian, non-Newtonian and nanofluids are discussed. Several methods exist to investigate such flow problems. This book introduces the applications of new, exact, numerical and semianalytical methods for such problems. The book also discusses different models for the simulation of fluid flow.
